☆ 4.7 Article

Tailoring the tribo-corrosion response of (CrNbTiAlV)CxNy coatings by controlling carbon content

TRIBOLOGY INTERNATIONAL (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Corrosion and friction resistance of TiVCrZrWNx high entropy ceramics coatings prepared by magnetron sputtering

Yanxin Si et al.

Summary: TiVCrZrWNx high entropy ceramics coatings were prepared by reactive magnetron sputtering, and the microstructure, mechanical properties, friction, and corrosion resistance of the coatings deposited at different nitrogen flow rates were studied. The results showed that the microstructure of the coatings strongly depended on the nitrogen flow rate, with a stable FCC structure formed at a nitrogen flow rate of 24 sccm. The hardness and corrosion resistance of the coatings increased with the nitrogen flow rate, and the formation of V2O5 during sliding in seawater reduced the coefficient of friction.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Coatings & Films

Construction of a compact nanocrystal structure for (CrNbTiAlV)Nx high-entropy nitride films to improve the tribo-corrosion performance

Cunxiu Zhang et al.

Summary: (CrNbTiAlV)N-x high-entropy nitride films were prepared using magnetron sputtering method. The study systematically investigated the effect of substrate bias on the microstructure, mechanical, electrochemical, and tribo-corrosion properties of the films. Results showed that the microstructure and mechanical properties of the films were significantly influenced by the substrate bias, impacting their performance under different conditions.

SURFACE & COATINGS TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Coatings & Films

Effect of nitrogen content on structural and mechanical properties of AlTiZrTaHf(-N) high entropy films deposited by reactive magnetron sputtering

Mohamed El Garah et al.

Summary: There is a growing interest in the design of high entropy alloys due to their remarkable properties and applications in various fields. The transition from amorphous to a face-centered cubic single phase can be achieved by increasing the nitrogen content. The same film exhibits good tribological properties compared to other films.

SURFACE & COATINGS TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Tailoring the microstructure, mechanical and tribocorrosion performance of (CrNbTiAlV)Nx high-entropy nitride films by controlling nitrogen flow

Cunxiu Zhang et al.

Summary: The high-entropy nitride films fabricated by adjusting nitrogen flow showed significant improvements in mechanical and anti-corrosion properties, with the film deposited at 38 sccm exhibiting optimal tribocorrosion performance in artificial seawater.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Fracture properties of high-entropy alloys

Bernd Gludovatz et al.

Summary: High-entropy alloys (HEAs), a new class of materials composed of at least four or five principal elements in (near)-equiatomic composition, have been widely used in materials science due to their outstanding mechanical properties. Some face-centered-cubic alloy compositions show exceptional combinations of strength, ductility, and fracture toughness at cryogenic temperatures, while certain body-centered-cubic refractory compositions exhibit remarkable high-temperature strength. Despite efforts to narrow down the compositional space, there are still only a few alloys that achieve the limits of mechanical performance.

MRS BULLETIN (2022)

Add to Collection

Article Engineering, Mechanical

High-temperature tribological behavior of CoCrFeNiV high-entropy alloys: A parallel comparison with CoCrFeNiMn high-entropy alloys

Min Zhang et al.

Summary: This study investigates the high-temperature tribological behavior of CoCrFeNiV and compares it with CoCrFeNiMn. The addition of V element in CoCrFeNiV leads to a significant reduction in wear rate and an increase in hardness. The worn surface analysis reveals that mild adhesion and oxidative wear are the dominant wear mechanisms of CoCrFeNiV. The presence of V2O5, NiO, and Cr2O3 provides excellent anti-oxidation lubrication during the friction process.

TRIBOLOGY INTERNATIONAL (2022)

Add to Collection

Article Engineering, Mechanical

Microstructure, mechanical properties and tribo-corrosion mechanism of (CrNbTiAlVMo)xN1-x coated 316 L stainless steel in 3.5 wt% NaCl solution

Dewen Niu et al.

Summary: In this study, (CrNbTiAlVMo)(x)N1-x coatings were deposited on 316 L steel by sputtering method, and their structure, mechanical and tribo-corrosion performances were investigated. The results showed that the coatings had a single FCC structure, and the particle size and orientation changed with the increase of Mo content. The coatings exhibited high hardness and elastic modulus, and better resistance to tribo-corrosion compared to 316 L steel.

TRIBOLOGY INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Ceramics

Dependence of mechanical and tribological performance on the microstructure of (CrAlTiNbV)Nx high-entropy nitride coatings in aviation lubricant

Xiaolong Lu et al.

Summary: By controlling the substrate bias, (CrAlTiNbV)Nx coatings can exhibit different crystal structures and properties. Optimum conditions for achieving the lowest friction coefficient and wear rate in aviation lubricant were found to be at substrate biases of -96 V and -126 V, respectively.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Chemistry, Physical

Influence of the nitrogen content on the structure and properties of MoNbTaVW high entropy alloy thin films

Ao Xia et al.

Summary: The influence of nitrogen incorporation on the chemical composition, structure, mechanical, and electrical properties of refractory (MoNbTaVW)(1-x)N-x high entropy alloy thin films is investigated in this study. The structural change from body centered cubic to face centered cubic with increasing nitrogen content resulted in increased hardness but also material embrittlement. The films were synthesized by two different physical vapor deposition methods onto silicon and polyimide substrates.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of carbon doping on mechanical, tribological, structural, anti-corrosion and anti-glass-sticking properties of CrNbSiTaZr high entropy alloy coatings

W. H. Kao et al.

Summary: The study revealed that HEA coatings without carbon addition exhibited the highest hardness and critical load, but poor tribological properties, while carbon-doped coatings, specifically with an acetylene flux rate of 19 sccm, showed superior hardness, critical load, and tribological performance. Additionally, annealed coatings generally demonstrated better anti-corrosion properties, and the addition of acetylene improved the anti-glass-sticking performance of the coatings.

THIN SOLID FILMS (2021)

Add to Collection

Article Chemistry, Physical

Hard and tough (NbTaMoW)Nx high entropy nitride films with sub-stoichiometric nitrogen

Hang Li et al.

Summary: The study showed that the hardness and elastic modulus of (NbTaMoW)N-x films are affected by the nitrogen content, with BCC solid solution structure when the nitrogen content is below 8% and FCC structure when it is above 0.16. The antisite defects of TMN in nitride films play a key role in the high hardness and enhanced toughness.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Investigating corrosion behavior of Ni and Ni-20Cr in molten ZnCl2

Simerjeet K. Gill et al.

Summary: The corrosion of Ni and Ni-20Cr in molten ZnCl2 at 593 K under argon atmosphere was investigated using cyclic polarization and electron microscopy techniques. It was found that the corrosion rates for Ni-20Cr were significantly higher than for pure Ni, attributed to selective anodic dissolution of Cr. The mechanisms of corrosion and dissolution kinetics were discussed, with grain boundary attack and formation of pore-salt network regions identified as acceleration factors.

CORROSION SCIENCE (2021)

Add to Collection

Article Materials Science, Ceramics

Microstructures and properties of (TiCrZrVAl)N high entropy ceramics films by multi-arc ion plating

Wenju Xu et al.

Summary: High entropy ceramics films were deposited on Inconel 718 alloys using multi-arc ion plating equipment with different nitrogen flow ratios, affecting the microstructure, mechanical properties, and tribological properties of the films. The films exhibited varying structures and characteristics depending on the nitrogen flow ratio, with higher ratios resulting in improved wear resistance and lower wear rates.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion resistant nanostructured eutectic high entropy alloy

S. Shuang et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Electrochemical and tribocorrosion performances of CrMoSiCN coating on Ti-6Al-4V titanium alloy in artificial seawater

Yongqiang Fu et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Microstructures and mechanical properties of CoCrFeMnNiVx high entropy alloy films

Shuang Fang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Engineering, Mechanical

Microstructure, mechanical and tribological properties of CoCrFeNiMn high entropy alloy matrix composites with addition of Cr3C2

Zhiming Guo et al.

TRIBOLOGY INTERNATIONAL (2020)

Add to Collection

Article Chemistry, Physical

A single-phase ScTiZrHf high-entropy alloy with thermally stable hexagonal close-packed structure

S. Uporov et al.

INTERMETALLICS (2020)

Add to Collection

Article Chemistry, Physical

Mxene nanosheets as an emerging solid lubricant for machine elements ? Towards increased energy e fficiency and service life

Max Marian et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

On the difference in carbon- and nitrogen-alloying of equiatomic FeMnCrNiCo high-entropy alloy

E. G. Astafurova et al.

MATERIALS LETTERS (2020)

Add to Collection

Article Materials Science, Coatings & Films

High entropy nitride (HEN) thin films of AlCoCrCu0.5FeNi deposited by reactive magnetron sputtering

Naveed A. Khan et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Engineering, Mechanical

High temperature tribology of CuMoTaWV high entropy alloy

Sajid Alvi et al.

WEAR (2019)

Add to Collection

Article Chemistry, Physical

High entropy alloy thin films of AlCoCrCu0.5FeNi with controlled microstructure

Naveed A. Khan et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

A feasible method for the fabrication of VAlTiCrSi amorphous high entropy alloy film with outstanding anti-corrosion property

Shujing Zheng et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Structural and tribological properties of CrMoCN coatings with various Mo contents in artificial seawater

Maoda Zhang et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Microstructure, phase and tribocorrosion behavior of 60NiTi alloy

Chao Yan et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Materials Science, Coatings & Films

Tribocorrosion behavior of low friction TiSiCN nanocomposite coatings deposited on titanium alloy for biomedical applications

Andre Hatem et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Microstructures and properties of high-entropy alloy films and coatings: a review

Wei Li et al.

MATERIALS RESEARCH LETTERS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Semiconductivities of passive films formed on stainless steel bend under erosion-corrosion conditions

L. Zeng et al.

CORROSION SCIENCE (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Noble metal high entropy alloys

Sungwoo Sohn et al.

SCRIPTA MATERIALIA (2017)

Add to Collection

Article Engineering, Mechanical

Slurry erosion behavior of high entropy alloys

R. B. Nair et al.

WEAR (2017)

Add to Collection

Review Materials Science, Multidisciplinary

Corrosion of high entropy alloys

Yao Qiu et al.

NPJ MATERIALS DEGRADATION (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of intergranular corrosion defects in a 2024 T351 aluminium alloy

Marie-Laetitia de Bonfils-Lahovary et al.

CORROSION SCIENCE (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of temperature on the electrochemical and passivation behavior of 2507 super duplex stainless steel in simulated desulfurized flue gas condensates

Zhongyu Cui et al.

CORROSION SCIENCE (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Localised corrosion in AA 2099-T83 aluminium-lithium alloy: The role of grain orientation

Y. Ma et al.

CORROSION SCIENCE (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Friction stir processing of aluminium alloy AA7075: Microstructure, surface chemistry and corrosion resistance

J. J. Pang et al.

CORROSION SCIENCE (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion behavior of selective laser melted Ti-6Al-4V alloy in NaCl solution

Nianwei Dai et al.

CORROSION SCIENCE (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes

Nianwei Dai et al.

CORROSION SCIENCE (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Tribocorrosion behavior of β-type Ti-15Zr-based alloys

D. R. N. Correa et al.

MATERIALS LETTERS (2016)

Add to Collection

Article Materials Science, Coatings & Films

Investigation on the corrosion resistance of trivalent chromium conversion passivate on electroplated Zn-Ni alloy

H. H. Sheu et al.

SURFACE & COATINGS TECHNOLOGY (2016)

Add to Collection

Article Engineering, Mechanical

Erosion-corrosion resistance of various stainless steel grades in high-temperature sulfuric acid solution

M. Lindgren et al.

WEAR (2016)

Add to Collection

Article Materials Science, Coatings & Films

Microstructure and tribological behavior of multilayered CrN coating by arc ion plating

Yunsong Niu et al.

SURFACE & COATINGS TECHNOLOGY (2015)

Add to Collection

Article Chemistry, Physical

Thermally stable laser cladded CoCrCuFeNi high-entropy alloy coating with low stacking fault energy

Hui Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Add to Collection

Article Chemistry, Physical

Improving the tribological performances of graphite-like carbon films on Si3N4 and SiC by using Si interlayers

Yongxin Wang et al.

APPLIED SURFACE SCIENCE (2011)

Add to Collection

Article Chemistry, Physical

Microstructure and tribological performance of self-lubricating diamond/tetrahedral amorphous carbon composite film

Xinchun Chen et al.

APPLIED SURFACE SCIENCE (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Tribocorrosion behaviour of low temperature plasma carburised 316L stainless steel in 0.5 M NaCl solution

Y. Sun et al.

CORROSION SCIENCE (2011)

Add to Collection

Article Materials Science, Multidisciplinary

The Impact of Corrosion on Society

C. M. Hansson

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)

Add to Collection

Article Engineering, Mechanical

Tribo-corrosion of materials: Interplay between chemical, electrochemical, and mechanical reactivity of surfaces

J. -P. Celis et al.

WEAR (2006)

Add to Collection

Article Materials Science, Coatings & Films

Mapping erosion-corrosion of WC/Co-Cr based composite coatings: Particle velocity and applied potential effects

M. M. Stack et al.

SURFACE & COATINGS TECHNOLOGY (2006)

Add to Collection

Review Materials Science, Multidisciplinary

Characterization of amorphous and nanocrystalline carbon films

PK Chu et al.

MATERIALS CHEMISTRY AND PHYSICS (2006)

Add to Collection

Article Engineering, Mechanical

Erosion-corrosion mapping of Fe in aqueous slurries: some views on a new rationale for defining the erosion-corrosion interaction

MM Stack et al.

WEAR (2004)

Add to Collection

Article Multidisciplinary Sciences

Raman spectroscopy of amorphous, nanostructured, diamond-like carbon, and nanodiamond

AC Ferrari et al.

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2004)

Add to Collection

Article Materials Science, Coatings & Films

Impact angle effects on the erosion-corrosion of superlattice CrN/NbN PVD coatings

MM Stack et al.

SURFACE & COATINGS TECHNOLOGY (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes

JW Yeh et al.

ADVANCED ENGINEERING MATERIALS (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.