☆ 4.7 Article

Energy dissipation mechanism of fiber metal laminate under low-velocity impact

THIN-WALLED STRUCTURES (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Manufacturing

Investigation on the low-velocity impact behaviour of non-symmetric FMLs-experimental and numerical methods

Xiangjian Meng et al.

Summary: This article investigates the low-velocity impact behavior of non-symmetric FMLs and develops a progressive damage model to predict the damage evolution of composite laminates. It is found that the impact behavior is closely related to the impacted side.

INTERNATIONAL JOURNAL OF CRASHWORTHINESS (2022)

Add to Collection

Article Mechanics

Impact-under-load damage tolerance of a fibre metal laminate

M. Rathnasabapathy et al.

Summary: The study found that the amount of impact damage and post-impact compressive strength of the fibre metal laminate (FML) depended on the type and magnitude of the preload under different loading conditions. More severe damage was induced under tension preload, with greater reduction in post-impact strength compared to compression.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Mechanics

Effect of matrix and hybrid reinforcement on fibre metal laminates under low-velocity impact loading

M. Hussain et al.

Summary: This study investigates the effect of matrix and hybrid reinforcement on the low-velocity impact behavior of Fibre Metal Laminates (FMLs). The results show that PVB-based FMLs have better impact resistance compared to epoxy-based FMLs. Tomography analysis reveals that PVB is more suitable for use with hybrid reinforcement. FMLs reinforced with aramid/3D-jute show higher resistance to deformation. FMLs made with PVB and aramid/3D-jute reinforcement exhibit overall superior low-velocity impact performance.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Mechanics

Low-velocity impact behavior of hybrid CFRP-elastomer-metal laminates in comparison with conventional fiber-metal laminates

Zhongyu Li et al.

Summary: This study investigates the low-velocity impact behavior of hybrid CFRP-elastomer-metal laminates (HyCEML) compared to conventional fiber-metal laminates (FML). The impact behavior is evaluated through numerical and experimental methods, analyzing internal damage mechanisms and energy distribution. It is found that introducing elastomer improves energy absorption and load-bearing capacity.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Engineering, Manufacturing

Finite element modelling of the impact response of fibre metal laminates under tension preloading

M. Rathnasabapathy et al.

Summary: This study presents a finite element (FE) model that accurately computes the low energy impact response and damage to fibre metal laminates (FMLs) under tension preloading. The FE model is capable of predicting the initiation and progression of impact damage, including metal plastic deformation, delamination damage, and debonding along the metal-composite interfaces. Experimental data for an aluminium/glass-epoxy FML is used to evaluate the accuracy of the FE model. The model accurately predicts the peak impact load, impact-time response, absorbed impact energy, and bulk deformation of the FML for different impact energy and preload conditions.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection

Article Engineering, Mechanical

Energy absorption and damage mechanism of UHMWPE-aluminum composite sandwich laminate under impact loading: An experimental investigation

Hassan Mansoori et al.

Summary: This study investigates the impact behavior and energy absorption of a Fiber Metal Laminate (FML) made of ultra-high molecular weight polyethylene (UHMWPE) fiber composite and aluminum 2024-T3 sheets. Results show that increasing the thickness of the composite core increases the energy absorption effect, with the highest specific energy absorption obtained for the sample with the lowest metal volume fraction.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2022)

Add to Collection

Article Materials Science, Composites

Impact damage to fibre metal laminates under compression loading

M. Rathnasabapathy et al.

Summary: The effect of in-plane compression loading on the low energy impact response of fibre metal laminates (FML) has been investigated. The results show that compression preloading increases the maximum impact force experienced by the FML due to the shortening of impact contact time. The out-of-plane deformation, plasticity damage to the aluminium layers, and delamination damage to the glass-epoxy layer are dependent on the compression strain level. A finite element (FE) model is used to predict the impact response and damage of FMLs, providing a valuable tool for analyzing the low energy impact response of FMLs used in compression load-bearing structures.

COMPOSITES COMMUNICATIONS (2022)

Add to Collection

Article Materials Science, Composites

Low velocity impact response of fiber metal laminates with nano-patterned metal surfaces

Jing Ye et al.

Summary: A new method called nano-scale electrochemical sculpture (NES) has been developed to enhance the bonding strength of fiber metal laminates (FMLs-NES). Through systematic investigation and comparison with traditional surface treatments, it has been found that FMLs-NES exhibits the smallest damage area and energy absorption, while maintaining structural integrity after impact. Finite element simulations have also provided insights into the impact damage progression and failure mechanisms, and the validated finite element model can be used to optimize the stacking sequence and predict residual strength after impact.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Mechanics

The comparison of the veritable response to impact load of conventional and Thin-Ply types of fibre metal laminates

Patryk Jakubczak

Summary: This study compared the response of Aluminium/Thin-Ply-Glass laminates and conventional Aluminium/Glass laminates to impact, finding similar failure mechanisms but differences in individual failure modes that may affect damage propagation. The earlier perforation initiation of thin-ply FMLs is attributed to the domination of bending stress over tensile stress.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

An experimental investigation on the effect of incorporating graphene nanoplatelets on the low-velocity impact behavior of fiber metal laminates

Azadeh Fathi et al.

Summary: This study demonstrates that incorporating 0.2 wt% of graphene nanoplatelets significantly improves the impact resistance of fiber metal laminates, enhancing adhesion between resin/fibers and composite plies, reducing damage area, and increasing penetration threshold. Additionally, reinforcing composite panels considerably enhances impact behavior compared to unmodified composites.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Review Engineering, Civil

On impact behavior of fiber metal laminate (FML) structures: A state-of-the-art review

Wentao He et al.

Summary: This paper reviews the impact characteristics of fiber metal laminates through experimental, numerical, and analytical methods. It discusses the influences of various factors on impact responses, compares numerical techniques, and explores analytical models and engineering applications. Feasible methods to enhance impact resistance and potential future studies on novel FML materials are suggested.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Manufacturing

Mechanical properties and failure mode of thin-ply fiber metal laminates under out-of-plane loading

Kohei Yamada et al.

Summary: The study showed that the number of metal layers in thin-ply fiber metal laminates (FMLs) affects the failure mode and mechanical properties during static flexural tests, with plastic deformation of the metal layers improving energy dissipation and leading to failure occurring in a limited range of locations.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Mechanics

The response of hybrid titanium carbon laminates to the low-velocity impact

P. Jakubczak et al.

Summary: The study evaluates the hybrid titanium carbon laminate resistance to dynamic loads through various criteria, and analyzes the damage mechanism. The experimental results indicate that the proportion of absorbed energy increases with the increasing impact energy.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Article Mechanics

An experimental and numerical investigation on low velocity impact response of GLAREs

Soroush Azhdari et al.

Summary: This study focused on investigating the damage mechanism of fiber metal laminates under low-velocity impact, utilizing both numerical simulation and experimental validation. Results showed good agreement between simulations and experiments, providing valuable insights into predicting damage initiation and development in such materials.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Numerical and experimental investigation on the oblique successive impact behavior and accumulated damage characteristics of fiber metal laminates

Lu Yao et al.

Summary: This paper investigates the dynamic response and accumulated damage characteristics of FML under successive impact loads through experimental tests and numerical modeling. The study demonstrates the impact behavior, failure mechanisms, and damage tolerance of FML under different impact angles. Results show an enhancement in stiffness and damage tolerance of FML after the first impact, with different impact angles affecting the response and damage characteristics.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Materials Science, Composites

Finite Element Simulation of Tensile Preload Effects on High Velocity Impact Behavior of Fiber Metal Laminates

Chao Zhang et al.

APPLIED COMPOSITE MATERIALS (2020)

Add to Collection

Article Mechanics

Experimental and numerical investigation into the impact resistance of aluminium carbon laminates

Patryk Jakubczak et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Engineering, Civil

The collation of impact behaviour of titanium/carbon, aluminum/carbon and conventional carbon fibres laminates

Patryk Jakubczak et al.

THIN-WALLED STRUCTURES (2020)

Add to Collection

Article Mechanics

Assessment of failure criteria and damage evolution methods for composite laminates under low-velocity impact

Xi Li et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Engineering, Multidisciplinary

Interlaminar fracture toughness of GLARE laminates based on asymmetric double cantilever beam (ADCB)

Xiaoge Hua et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Mechanics

Effect of temperature and fiber type on impact behavior of thermoplastic fiber metal laminates

Fabrizio Sarasini et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Mechanics

Investigation on impact behavior of FMLs under multiple impacts with the same total energy: Experimental characterization and numerical simulation

Lu Yao et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Engineering, Civil

Numerical prediction for effects of fiber orientation on perforation resistance behaviors of patch-repaired composite panel subjected to projectile impact

Hongyong Jiang et al.

THIN-WALLED STRUCTURES (2019)

Add to Collection

Article Engineering, Civil

Low velocity impact response of GLARE laminates based on a new efficient implementation of Puck's criterion

Ziwen Wang et al.

THIN-WALLED STRUCTURES (2019)

Add to Collection

Article Mechanics

3D explicit finite element analysis of tensile failure behavior in adhesive-bonded composite single-lap joints

Jinxin Ye et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Mechanics

The modelling of impact loading on thermoplastic fibre-metal laminates

Rafael C. Santiago et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Engineering, Civil

The effect of aluminum and titanium sequence on ballistic limit of bi-metal 2/1 FMLs

G. H. Majzoobi et al.

THIN-WALLED STRUCTURES (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Low-velocity impact damage response of fiberglass/magnesium fiber-metal laminates under different size and shape impactors

Davide De Cicco et al.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2017)

Add to Collection

Article Mechanics

On the relationship between failure mechanism and compression after impact (CAI) strength in composites

M. R. Abir et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Mechanics

Application of energy dissipation approach for notched behavior in fiber metal laminates

Jipeng Zhang et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Mechanics

Finite element modeling of damage development in cross-ply composite laminates subjected to low velocity impact

Chao Zhang et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Mechanics

Mechanical behaviors of Ti/CFRP/Ti laminates with different surface treatments of titanium sheets

Xin Li et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Materials Science, Composites

Study on stress concentration in notched cross-ply laminates under tensile loading

Guangyan Liu et al.

JOURNAL OF COMPOSITE MATERIALS (2016)

Add to Collection

Article Materials Science, Composites

The Effects of Debonding on the Low-Velocity Impact Response of Steel-CFRP Fibre Metal Laminates

T. Parnanen et al.

APPLIED COMPOSITE MATERIALS (2016)

Add to Collection

Article Mechanics

Experimental and numerical investigation into the influence of stacking sequence on the low-velocity impact response of new 3D FMLs

Zohreh Asaee et al.

COMPOSITE STRUCTURES (2016)

Add to Collection

Article Materials Science, Composites

Low-velocity impact response of fiber-metal laminates consisting of different standard GLARE grades

George S. E. Bikakis et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2016)

Add to Collection

Article Mechanics

Initial and progressive failure analyses for composite laminates using Puck failure criterion and damage-coupled finite element method

Chi-Seung Lee et al.

COMPOSITE STRUCTURES (2015)

Add to Collection

Article Mechanics

Low velocity impact of carbon fiber aluminum laminates

Guo-Cai Yu et al.

COMPOSITE STRUCTURES (2015)

Add to Collection

Article Materials Science, Composites

Response of GLARE fiber-metal laminates under radial in-plane preloading and lateral indentation

George S. E. Bikakis

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)

Add to Collection

Article Mechanics

Modelling bearing failure in countersunk composite joints under quasi-static loading using 3D explicit finite element analysis

B. Egan et al.

COMPOSITE STRUCTURES (2014)

Add to Collection

Review Mechanics

Low velocity impact response of fibre-metal laminates - A review

Gin Boay Chai et al.

COMPOSITE STRUCTURES (2014)

Add to Collection

Article Mechanics

Progressive failure analysis of perforated aluminium/CFRP fibre metal laminates using a combined elastoplastic damage model and including delamination effects

Jing-Fen Chen et al.

COMPOSITE STRUCTURES (2014)

Add to Collection

Article Engineering, Manufacturing

Impact characterization of thermoformable fibre metal laminates of 2024-T3 aluminium and AZ31B-H24 magnesium based on self-reinforced polypropylene

J. I. Mugica et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)

Add to Collection

Review Engineering, Mechanical

Modelling of impact damage and dynamics in fibre-metal laminates - A review

F. D. Moriniere et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2014)

Add to Collection

Article Engineering, Aerospace

Analytical modeling to predict the low velocity impact response of circular GLARE fiber-metal laminates

George J. Tsamasphyros et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2013)

Add to Collection

Article Mechanics

An integrated study on the low-velocity impact response of the GLARE fibre-metal laminate

F. D. Moriniere et al.

COMPOSITE STRUCTURES (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Low-velocity impact energy partition in GLARE

F. D. Moriniere et al.

MECHANICS OF MATERIALS (2013)

Add to Collection

Review Engineering, Mechanical

Impact resistance of fiber-metal laminates: A review

M. Sadighi et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2012)

Add to Collection

Article Mechanics

Numerical modelling of perforation failure in fibre metal laminates subjected to low velocity impact loading

J. Fan et al.

COMPOSITE STRUCTURES (2011)

Add to Collection

Article Materials Science, Composites

Low-velocity impact behavior of fiber metal laminates

N. Tsartsaris et al.

JOURNAL OF COMPOSITE MATERIALS (2011)

Add to Collection

Article Materials Science, Composites

Numerical Modeling of the Impact Response of Fiber-Metal Laminates

Z. W. Guan et al.

POLYMER COMPOSITES (2009)

Add to Collection

Article Materials Science, Composites

Scaling effects in the low velocity impact response of fiber-metal laminates

J. G. Carrillo et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2008)

Add to Collection

Article Mechanics

An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models

A. Turon et al.

ENGINEERING FRACTURE MECHANICS (2007)

Add to Collection

Article Materials Science, Composites

The impact properties of high-temperature fiber-metal laminates

P. Cortes et al.

JOURNAL OF COMPOSITE MATERIALS (2007)

Add to Collection

Article Engineering, Manufacturing

Low-velocity impact behaviour of fibreglass-aluminium laminates

G Caprino et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.