☆ 4.7 Article

Experimental, numerical, and theoretical crushing behaviour of an innovative auxetic structure fabricated through 3D printing

THIN-WALLED STRUCTURES (2023)

Related references

Note: Only part of the references are listed.

Review Engineering, Multidisciplinary

Manufacturing, characteristics and applications of auxetic foams: A state-of-the-art review

Wei Jiang et al.

Summary: Auxetic foams exhibit unique mechanical properties and multiphysics characteristics, making them potential candidates for applications in biomedicine, aerospace, and smart sensing. However, challenges such as complex fabrication and lacking stability hinder their practical applications, requiring further research and development to overcome these barriers.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Engineering, Multidisciplinary

In-plane energy absorption characteristics of a modified re-entrant auxetic structure fabricated via 3D printing

Niranjan Kumar Choudhry et al.

Summary: In this study, the in-plane energy absorption characteristics of modified re-entrant auxetic honeycombs were investigated, showing a 36% improvement in specific energy absorption capacity compared to conventional structures. The introduced nodes with low rotational stiffness contributed to the enhanced energy absorption capacity of the modified structure.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Engineering, Civil

Paper tube-guided blast response of sandwich panels with auxetic re-entrant and regular hexagonal honeycomb cores - An experimental study

Ganchao Chen et al.

Summary: This paper investigates the dynamic behavior and failure modes of metallic sandwich panels with different auxetic and non-auxetic cores under blast tests. The study reveals the effects of blast impulse and core density on the panel blast resistance and failure mechanisms. The research provides valuable references for the design of auxetic honeycomb sandwich core in protection applications.

ENGINEERING STRUCTURES (2022)

Add to Collection

Article Instruments & Instrumentation

3D-printed bio-inspired zero Poisson's ratio graded metamaterials with high energy absorption performance

Ramin Hamzehei et al.

Summary: This study introduces a novel type of two-dimensional graded metamaterials with zero Poisson's ratio for energy absorption applications. Inspired by the 2D image of a DNA molecule, these metamaterials are designed with re-entrant unit cells that result in a zero Poisson's ratio behavior. The energy absorption capacity of the metamaterials is enhanced by incorporating slots and horizontal beams, taking inspiration from the DNA molecule's base pairs.

SMART MATERIALS AND STRUCTURES (2022)

Add to Collection

Article Chemistry, Physical

Fabrication and Mechanical Testing of the Uniaxial Graded Auxetic Damper

Hasan Al-Rifaie et al.

Summary: This paper presents the fabrication and experimental testing of the Uniaxial Graded Auxetic Damper (UGAD), a shock-absorbing system with lightweight and excellent energy-dissipation characteristics. The results show that the manufactured UGAD matches well with the computational predictions, validating the proposed computational and material models.

MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Characterization of 3D-printed PLA parts with different raster orientations and printing speeds

Mohammad Reza Khosravani et al.

Summary: This paper discusses the effects of two printing parameters on the mechanical behavior of additively manufactured components. Based on experimental results, the strength and stiffness of the examined specimens are determined, and the dependency of the strength and elastic modulus of 3D-printed parts on the raster orientation is documented.

SCIENTIFIC REPORTS (2022)

Add to Collection

Article Engineering, Aerospace

Dynamic crushing response of novel re-entrant circular auxetic honeycombs: Numerical simulation and theoretical analysis

Chang Qi et al.

Summary: This study investigates the in-plane dynamic crushing responses of a novel auxetic honeycomb structure called the REC honeycomb. The study reveals that the REC honeycomb shows excellent energy absorption and penetration resistance, outperforming its RE counterpart.

AEROSPACE SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Engineering, Mechanical

Ballistic characteristics of 3D-printed auxetic honeycomb sandwich panel using CFRP face sheet

Junbo Yan et al.

Summary: This study demonstrated the advantages of auxetic honeycomb sandwich panels in terms of ballistic impact performance. Through experiments and numerical modeling, it was found that the honeycomb core type, unit cell angle, and face-sheets material have significant influences on ballistic resistance, improving the material's ballistic impact performance.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2022)

Add to Collection

Article Instruments & Instrumentation

Reversible energy absorption of elasto-plastic auxetic, hexagonal, and AuxHex structures fabricated by FDM 4D printing

N. Namvar et al.

Summary: The present study introduces a method of using 4D printing process to manufacture reconfigurable mechanical metamaterials for recoverable energy dissipation and absorption applications with shape memory effects. It is found that metamaterials with re-entrant auxetic unit-cells exhibit better energy absorption capability and show mechanical hysteresis and energy dissipation when undergoing a loading-unloading cycle.

SMART MATERIALS AND STRUCTURES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

4D Metamaterials with Zero Poisson's Ratio, Shape Recovery, and Energy Absorption Features

Ramin Hamzehei et al.

Summary: This article introduces novel 3D zero Poisson's ratio (ZPR) metamaterials for reversible energy absorption applications fabricated by 4D printing technology. The designs are based on piecemeal energy absorption (PEA) and conventional energy absorption (CEA) approaches. Finite element analysis and experimental testing are used to validate the accuracy and performance of the designs. The article also demonstrates the shape recovery capability of the metamaterials through a thermal test.

ADVANCED ENGINEERING MATERIALS (2022)

Add to Collection

Article Mechanics

Quasi-static crushing response of a novel 3D re-entrant circular auxetic metamaterial

Feng Jiang et al.

Summary: In this study, a new type of three-dimensional auxetic metamaterial was proposed and its crushing response under quasi-static compression was investigated through experimental tests and numerical simulations. The results showed that the proposed metamaterial exhibited an X deformation mode and had a higher energy absorption capacity compared to other structures. Additionally, the effects of geometric parameters and friction coefficient on the material's performance were also studied.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Mechanics

Dual-mechanism auxetic-core protective sandwich structure under blast loading

Rajendra Prasad Bohara et al.

Summary: This paper introduces a protective sandwich structure with dual-mechanism auxetic compression and tension behavior and evaluates its protective performance through numerical simulations. The results show that the sandwich structure has excellent performance in terms of energy absorption, stress mitigation, and deflection control, and offers better protection compared to an equivalent solid structure.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Engineering, Civil

In-plane mechanical behavior of novel auxetic hybrid metamaterials

Wenjiao Zhang et al.

Summary: This paper presents two novel concepts of hybrid metamaterials, combining a core unit cell of re-entrant or cross-chiral shape with lateral missing ribs. The in-plane mechanical properties of these materials have been investigated using finite element simulations, leading to optimized designs and specific effective properties. Nonlinear simulations and experimental tests have been conducted to understand the behavior of these architectures under large deformations.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Review Engineering, Multidisciplinary

Advanced honeycomb designs for improving mechanical properties: A review

Chang Qi et al.

Summary: Honeycombs are ultra-light materials with outstanding mechanical properties, widely used in various fields. Different designs at different scales affect the mechanical properties of honeycombs, and classifying honeycomb designs can better understand their characteristics.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Engineering, Mechanical

Investigation of the auxetic oval structure for energy absorption through quasi-static and dynamic experiments

Steven Linforth et al.

Summary: Auxetics are structures and materials with a negative Poisson's ratio, which contract perpendicular to the applied force under compression. The research investigated an auxetic structure with oval perforations, exploring design criteria and developing a new design called the 'Hybrid Auxetic Oval' to mitigate the effects of fracture. Dynamic and quasi-static experiments showed similar responses, with energy absorption mechanisms and densification strains examined using digital image correlation.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2021)

Add to Collection

Article Engineering, Mechanical

Novel lightweight high-energy absorbing auxetic structures guided by topology optimisation

Rajendra Prasad Bohara et al.

Summary: This paper explores lightweight high-performance auxetic structures for protective applications, developing novel designs such as the hourglass structure, braced cross-petal structure, and cross-petal structure. Through analytical design formulations and finite element simulations, the hourglass structure demonstrated superior energy absorption capacity, highlighting its potential for protective applications.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Shear modulus of conventional and auxetic open-cell foam

Nejc Novak et al.

Summary: This study analyzed the shear moduli of conventional and auxetic open-cell polymer foams, finding that the measured shear moduli of auxetic foams were generally lower, and the calculated shear moduli were lower than the measured values.

MECHANICS OF MATERIALS (2021)

Add to Collection

Article Engineering, Civil

Multi-scale characterization of novel re-entrant circular auxetic honeycombs under quasi-static crushing

Chang Qi et al.

Summary: In this study, the mechanical properties of REC honeycombs with different geometric parameters were thoroughly investigated through finite element simulations and theoretical analyses. It was found that adjusting the geometric parameters of the unit cell can tailor the crushing stress, energy absorption characteristics, and NPR value of the honeycomb, triggering specific deformation mechanisms at meso and macro scales. The study provides insights for engineering applications by revealing the effects of geometric parameters on the energy absorption capabilities and NPR values of REC honeycombs.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Aerospace

In-plane compression behaviors of the auxetic star honeycomb: Experimental and numerical simulation

Lulu Wei et al.

Summary: This study investigates the deformation behavior of star honeycombs under in-plane compression through experiments and numerical simulations. The results show that adjusting micro and macro geometric parameters can significantly enhance deformation stability and energy absorption capacity. The theoretical model established shows good agreement with experimental results, and improved star honeycomb structures exhibit better performance.

AEROSPACE SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Crashworthiness design and multi-objective optimization of a novel auxetic hierarchical honeycomb crash box

Hailun Tan et al.

Summary: This paper introduces a novel auxetic hierarchical crash box and shows that multi-objective optimization can effectively improve its performance. The application of this crash box significantly enhances the crashworthiness of electric vehicles.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2021)

Add to Collection

Article Engineering, Civil

Low-velocity impact resistance of composite sandwich panels with various types of auxetic and non-auxetic core structures

Fatih Usta et al.

Summary: The study found that non-auxetic cores may have advantages over auxetic cores at small deformations, but auxetic cores provide greater impact resistance as the impact energy increases. Arrowhead and hexachiral structures perform well in applications involving impacts under large deformations.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Review Engineering, Civil

Design, manufacturing and applications of auxetic tubular structures: A review

Chen Luo et al.

Summary: This paper extensively reviews the design methods, advanced manufacturing technologies, mechanical properties, and potential applications of auxetic tubular structures. Furthermore, it discusses the challenges and opportunities in this field to inspire future research work.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Review Engineering, Manufacturing

On the application of additive manufacturing methods for auxetic structures: a review

Athul Joseph et al.

Summary: Auxetic structures are unique structural components with a negative Poisson's ratio, requiring specialized manufacturing processes for realization. Additive manufacturing techniques play a crucial role in fabricating auxetic structures, providing faster and more precise manufacturing methods. A detailed discussion of various AM techniques offers insights into the current research status of auxetic structures.

ADVANCES IN MANUFACTURING (2021)

Add to Collection

Article Engineering, Manufacturing

Compressive properties of 3D printed auxetic structures: experimental and numerical studies

Amer Alomarah et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2020)

Add to Collection

Article Engineering, Aerospace

Deformation behaviors and energy absorption of auxetic lattice cylindrical structures under axial crushing load

Yongguang Guo et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Review Chemistry, Analytical

Cellular Auxetic Structures for Mechanical Metamaterials: A Review

Parth Uday Kelkar et al.

SENSORS (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Crashworthiness analysis and collaborative optimization design for a novel crash-box with re-entrant auxetic core

Tao Wang et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2020)

Add to Collection

Article Engineering, Civil

A novel star auxetic honeycomb with enhanced in-plane crushing strength

Lulu Wei et al.

THIN-WALLED STRUCTURES (2020)

Add to Collection

Article Engineering, Civil

Crushing investigation of crash boxes filled with honeycomb and re-entrant (auxetic) lattices

Jonathan Simpson et al.

THIN-WALLED STRUCTURES (2020)

Add to Collection

Article Physics, Condensed Matter

Stiffness of Synclastic Wood-Based Auxetic Sandwich Panels

Krzysztof Pelinski et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2020)

Add to Collection

Article Physics, Condensed Matter

Numerical and Experimental Studies on the Deformation of Missing-Rib and Mixed Structures under Compression

Cong Tang et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2020)

Add to Collection

Article Engineering, Mechanical

Compressive behaviour of chiral auxetic cellular structures at different strain rates

Nejc Novak et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)

Add to Collection

Article Engineering, Multidisciplinary

Enhancing indentation and impact resistance in auxetic composite materials

Tiantian Li et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Engineering, Civil

Performance of a 3D printed cellular structure inspired by bone

Abdallah Ghazlan et al.

THIN-WALLED STRUCTURES (2020)

Add to Collection

Article Engineering, Civil

Crashworthiness of novel concentric auxetic reentrant honeycomb with negative Poisson's ratio biologically inspired by coconut palm

Hongyong Jiang et al.

THIN-WALLED STRUCTURES (2020)

Add to Collection

Article Engineering, Multidisciplinary

Large deformation and energy absorption of additively manufactured auxetic materials and structures: A review

Jianjun Zhang et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Instruments & Instrumentation

Compressive properties of a novel additively manufactured 3D auxetic structure

Amer Alomarah et al.

SMART MATERIALS AND STRUCTURES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Stretchable and compressible piezoresistive sensors from auxetic foam and silver nanowire

Mohammad Faisal Ahmed et al.

MATERIALS CHEMISTRY AND PHYSICS (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Mechanical design and multifunctional applications of chiral mechanical metamaterials: A review

Wenwang Wu et al.

MATERIALS & DESIGN (2019)

Add to Collection

Article Mechanics

A novel re-entrant auxetic honeycomb with enhanced in-plane impact resistance

Huan Wang et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Mechanics

Auxetic nail: Design and experimental study

Xin Ren et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Review Engineering, Civil

A review on functionally graded structures and materials for energy absorption

Fengxiang Xu et al.

ENGINEERING STRUCTURES (2018)

Add to Collection

Review Instruments & Instrumentation

Auxetic metamaterials and structures: a review

Xin Ren et al.

SMART MATERIALS AND STRUCTURES (2018)

Add to Collection

Article Multidisciplinary Sciences

3D Printed Auxetic Mechanical Metamaterial with Chiral Cells and Re-entrant Cores

Yunyao Jiang et al.

SCIENTIFIC REPORTS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical properties and energy absorption capability of functionally graded F2BCC lattice fabricated by SLM

Dheyaa S. J. Al-Saedi et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Engineering, Mechanical

Three-dimensional modelling of auxetic sandwich panels for localised impact resistance

Gabriele Imbalzano et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Design and modeling of auxetic and hybrid honeycomb structures for in-plane property enhancement

Aniket Ingrole et al.

MATERIALS & DESIGN (2017)

Add to Collection

Article Multidisciplinary Sciences

Origami-based cellular metamaterial with auxetic, bistable, and self-locking properties

Soroush Kamrava et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Mechanics

Impact and close-in blast response of auxetic honeycomb-cored sandwich panels: Experimental tests and numerical simulations

Chang Qi et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Mechanics

Fracture and impact characterization of novel auxetic Kevlar®/Epoxy laminated composites

Sen Yang et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication, characterisation and modelling of uniform and gradient auxetic foam sheets

O. Duncan et al.

ACTA MATERIALIA (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Dynamic Crushing Strength Analysis of Auxetic Honeycombs

Xiuhui Hou et al.

ACTA MECHANICA SOLIDA SINICA (2016)

Add to Collection

Article Materials Science, Multidisciplinary

In-plane dynamic crushing of re-entrant auxetic cellular structure

Wangyu Liu et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Mechanics

Analyses on the In-Plane Impact Resistance of Auxetic Double Arrowhead Honeycombs

Jinxiu Qiao et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2015)

Add to Collection

Article Mechanics

Dynamic crushing and energy absorption of regular, irregular and functionally graded cellular structures

Amin Ajdari et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2011)

Add to Collection

Article Engineering, Mechanical

Dynamic crushing of honeycombs and features of shock fronts

Z. Zou et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2009)

Add to Collection

Article Chemistry, Applied

Compressive strain at the onset of densification of cellular solids

Q. M. Li et al.

JOURNAL OF CELLULAR PLASTICS (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.