☆ 4.7 Article

A semi-analytical model for the mode II fracture toughness of multidirectional composite laminates

THIN-WALLED STRUCTURES (2023)

Related references

Note: Only part of the references are listed.

Article Mechanics

Efficiently determining the R-curve and bridging traction-separation relation of mode I delamination in a simple way

Jinrui Ye et al.

Summary: The R-curve and bridging traction-separation relation are important for understanding large scale fibre bridging behavior during delamination growth process. This study proposes a simple semi-analytical method that requires only experimentally recorded load and displacement to determine these relationships. The method avoids the need for complex devices or visual measurements, providing a more efficient and reliable approach for characterizing delamination behavior.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Mechanics

Fatigue behavior of 2.5D woven composites based on the first-order bending vibration tests

Yana Wang et al.

Summary: The fatigue behavior of 2.5D woven composites was investigated in this study. It was found that rapid damage evolution occurred under high stress levels, while crack growth showed arrest behavior under low stress levels. Based on experimental data, a residual stiffness model and an epsilon-N curve formula were established, providing guidance for the design and analysis of 2.5D woven composites.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Mechanics

Mode II fatigue delamination behaviour of composite multidirectional laminates and the stress ratio effect

Chaoqi Liu et al.

Summary: Shear-dominated delamination is a common type of damage in composite laminates. Understanding the fatigue delamination growth (FDG) behavior in mode II is crucial for damage tolerance design. This study investigates the FDG behavior of multidirectional laminates, considering the effects of fiber bridging and stress ratio. A FDG model is proposed to characterize these combined effects, and the proposed model is validated by experimental data and previous literature results.

ENGINEERING FRACTURE MECHANICS (2022)

Add to Collection

Article Mechanics

A semi-analytical method for determining mode-II fracture toughness and bridging law of composite laminates

Yu Gong et al.

Summary: In this study, a semi-analytical method based on the Castigliano theorem and the point friction theory was successfully used to determine the mode-II fracture toughness and bridging law of composite laminates. The accuracy of the method was verified through experimental data, and the bridging law was integrated into a model for delamination growth simulation, showing good agreements with experimental results. This method is simple and efficient, avoiding problems of unstable crack growth and difficult observation.

ENGINEERING FRACTURE MECHANICS (2022)

Add to Collection

Article Chemistry, Physical

Failure Analysis of Hat-Stringer-Stiffened Aircraft Composite Panels under Four-Point Bending Loading

Binkai Li et al.

Summary: This study conducted experimental and numerical research on the static and fatigue failure of hat-stringer-stiffened composite panels under four-point bending loading. A novel theoretical model was proposed and a numerical method was developed for accurate prediction. The results showed good agreement between predictions and experiments.

MATERIALS (2022)

Add to Collection

Article Mechanics

An R-curve effect-included delamination growth criterion for mixed-mode I/II delamination predictions of composite laminates

Yu Gong et al.

Summary: In this study, a novel delamination growth criterion considering the significant R-curve effects was proposed for mixed-mode I/II delamination predictions. Its adequacy and accuracy were validated by experimental data for two different composite materials. The proposed criterion is easy to use with only two experimentally obtained parameters.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Engineering, Mechanical

A parametric study on the failure strength of multi-bolt composite repairs with different configurations

Xiang Li et al.

Summary: A numerical method based on finite fracture mechanics is proposed to predict the failure behavior of multi-bolt composite repairs with different configurations. Various critical parameters affecting the failure strength are studied, and useful guidance for design and optimization is provided.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Mode II fracture toughness related to ply angle for composite delamination analysis

Chen Liu et al.

Summary: The study showed that the mode II toughness of the variable angle ply interface is significantly larger than that of the straight ply interface, further confirming the influence of different ply angles on the mode II delamination behavior of carbon/polymer laminates.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2021)

Add to Collection

Article Mechanics

Experimental and numerical benchmark study of mode II interlaminar fracture toughness of unidirectional GFRP laminates under shear loading using the end-notched flexure (ENF) test

A. Gliszczynski et al.

Summary: This paper discusses experimental and numerical analysis of the ENF test of GRFP unidirectional laminates. The use of VCCT and CZM methods for modelling the fracture zone under mode II shear loading has shown the superiority of CZM over VCCT in terms of applicability for coarse meshes, convergence of results, shorter CPU time, and no need for initial delamination front assumption.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Mechanics

Delamination in carbon fiber epoxy DCB laminates with different stacking sequences: R-curve behavior and bridging traction-separation relation

Yu Gong et al.

Summary: The effects of stacking sequence on the R-curve and traction-separation relation in unidirectional and multidirectional CFRP DCB laminates were systematically investigated, showing strong influence on fiber bridging length, steady-state fracture toughness, and maximum bridging stress. However, there was no clear relationship between these factors and the stacking sequence. The obtained traction-separation relations were successfully integrated into a tri-linear cohesive zone model and numerical results agreed well with test results, demonstrating applicability for delamination modeling in composite laminates with fiber bridging effects.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Materials Science, Composites

Development of a standardized test procedure and an improved data reduction method for the mixed-mode I/II delamination in composite laminates

Yu Gong et al.

Summary: This paper examines the effects of complex failure mechanisms on the flexural modulus of multidirectional laminates and proposes an improved data reduction method to accurately characterize fracture toughness and develop standard test procedures for mixed-mode delamination.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Experimental and XIGA-CZM based Mode-II and mixed-mode interlaminar fracture model for unidirectional aerospace-grade composites

Vikas Kaushik et al.

Summary: This article presents a fracture model for evaluation of Mode-II and Mixed-Mode interlaminar fracture properties of unidirectional laminated composites. Experimental and numerical results show good agreement between the experimentally obtained results and theoretical predictions.

MECHANICS OF MATERIALS (2021)

Add to Collection

Article Engineering, Mechanical

Predicting mode II delamination growth of composite materials to assist simplification of fatigue spectra by truncating non-damaging cycles validated with experiment

Rowan Healey et al.

Summary: A mode II delamination growth rate model was developed using constant amplitude fatigue data and tested against experimental results. The model was utilized to simplify variable amplitude fatigue spectra and successfully achieved a 77% reduction in spectra length, which was confirmed through experimental fatigue testing.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

Add to Collection

Article Materials Science, Composites

Mode I and mode II delamination of carbon/glass/epoxy hybrid composite: A statistics-based analysis

Francisco Maciel Monticeli et al.

Summary: The study investigated the delamination of a carbon/glass/epoxy hybrid composite to analyze the effect of reinforcement heterogeneity on data dispersion, revealing an increase in SERR for the hybrid composite at all reliability levels. The Weibull distribution model provided the best fit for predicting energy release versus crack length.

POLYMER COMPOSITES (2021)

Add to Collection

Article Engineering, Civil

Analytical study and experimental investigation on delamination in drilling of CFRP laminates twist drills

Qian Wang et al.

Summary: This study successfully predicted critical thrust forces in composite laminates under different cutting conditions and determined critical feed rates at different ply locations through drilling tests and theoretical models. The results provide guidance for reducing drilling-induced delamination.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Polymer Science

Displacement Rate Effects on the Mode II Shear Delamination Behavior of Carbon Fiber/Epoxy Composites

Kean Ong Low et al.

Summary: This study investigates the effect of displacement rate on mode II delamination in unidirectional carbon/epoxy composites. It is found that the fracture toughness increases with displacement, and different damage mechanisms are observed at different rates. The proposed rate-dependent model fits well with the experimental data, and good agreement is found between experimental and numerical results.

POLYMERS (2021)

Add to Collection

Article Engineering, Multidisciplinary

A novel four-linear cohesive law for the delamination simulation in composite DCB laminates

Shihao Yin et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Engineering, Mechanical

Fatigue delamination growth of carbon and glass reinforced fiber metal laminates in fracture mode II

Jaroslaw Bienias et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Add to Collection

Article Engineering, Chemical

Mode II interlaminar fracture toughness of woven E-glass/epoxy composites in the presence of mat interleaves

Mohammad Reza Hosseini et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)

Add to Collection

Article Engineering, Manufacturing

Experiments and numerical modelling on angle-ply laminates under remote mode II loading

M. Herraez et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Engineering, Mechanical

Using a residual strength model to predict mode II delamination failure of composite materials under block fatigue loading

Nabil M. Chowdhury et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Add to Collection

Article Engineering, Mechanical

A modified mode I cohesive zone model for the delamination growth in DCB laminates with the effect of fiber bridging

Yu Gong et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Materials Science, Characterization & Testing

Investigation on interlaminar delamination tendency of multidirectional carbon fiber composites

Raja Muhammad Awais Khan et al.

POLYMER TESTING (2020)

Add to Collection

Article Engineering, Civil

Investigation of nonlinear post-buckling delamination in curved laminated composite panels via cohesive zone model

Behnam Ameri et al.

THIN-WALLED STRUCTURES (2020)

Add to Collection

Article Engineering, Civil

Mode-II fatigue response of AS4/8552 carbon /epoxy composite laminates interleaved by electrospun nanofibers

Reza Mohammadi et al.

THIN-WALLED STRUCTURES (2020)

Add to Collection

Article Mechanics

R-curve behaviour of the mixed-mode I/II delamination in carbon/epoxy laminates with unidirectional and multidirectional interfaces

Yu Gong et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Mechanics

Delamination migration in multidirectional composite laminates under mode I quasi-static and fatigue loading

Yu Gong et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Mechanics

Experimental study on delamination migration in multidirectional laminates under mode II static and fatigue loading, with comparison to mode I

Yu Gong et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Engineering, Multidisciplinary

An interface-dependent model of plateau fracture toughness in multidirectional CFRP laminates under mode I loading

Libin Zhao et al.

COMPOSITES PART B-ENGINEERING (2017)

Add to Collection

Article Mechanics

Experimental study of the influence of ply orientation on DCB mode-I delamination behavior by using multidirectional fully isotropic carbon/epoxy laminates

M. S. Bin Mohamed Rehan et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Mechanics

Intralaminar fracture of unidirectional carbon/epoxy composite: experimental results and numerical analysis

G. Pappas et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)

Add to Collection

Article Mechanics

A progressive damage analysis based characteristic length method for multi-bolt composite joints

Jianyu Zhang et al.

COMPOSITE STRUCTURES (2014)

Add to Collection

Article Mechanics

Simulation of delamination growth in multidirectional laminates under mode I and mixed mode I/II loadings using cohesive elements

Libin Zhao et al.

COMPOSITE STRUCTURES (2014)

Add to Collection

Article Materials Science, Composites

Modified maximum stress failure criterion for composite π joints

Libin Zhao et al.

JOURNAL OF COMPOSITE MATERIALS (2013)

Add to Collection

Article Mechanics

A status report on delamination resistance testing of polymer-matrix composites

A. J. Brunner et al.

ENGINEERING FRACTURE MECHANICS (2008)

Add to Collection

Article Materials Science, Composites

Experimental investigation on the influence of crack front to fiber orientation on fatigue delamination growth rate under mode II

M Beghini et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2006)

Add to Collection

Article Materials Science, Composites

Mode II interlaminar fracture of carbon/epoxy multidirectional laminates

AB Pereira et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2004)

Add to Collection

Article Engineering, Manufacturing

Analysis of mode II interlaminar fracture of multidirectional laminates

AB de Morais

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)

Add to Collection

Article Mechanics

Numerical and experimental investigation of a composite ENF-specimen

J Schon et al.

ENGINEERING FRACTURE MECHANICS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.