Related references
Note: Only part of the references are listed.Coupling effects of strain rate and fatigue damage on wheel-rail contact behaviour: a dynamic finite element simulation
Xiongfei Zhou et al.
INTERNATIONAL JOURNAL OF RAIL TRANSPORTATION (2023)
Dynamic response of multilayer curved aluminum honeycomb sandwich beams under low-velocity impact
Jianxun Zhang et al.
THIN-WALLED STRUCTURES (2022)
Strain-rate dependent tensile behavior of railway wheel/rail steels with equivalent fatigue damage: Experiment and constitutive modeling
Lin Jing et al.
ENGINEERING FRACTURE MECHANICS (2022)
Crashworthiness of bamboo-inspired circular tubes used for the energy absorber of rail vehicles
Kai Liu et al.
ACTA MECHANICA SINICA (2022)
Behaviour of continuous fibre composite sandwich core under low-velocity impact
Sartip Zangana et al.
THIN-WALLED STRUCTURES (2021)
Failure analysis of bio-inspired corrugated sandwich structures fabricated by laser powder bed fusion under three-point bending
Liang Meng et al.
COMPOSITE STRUCTURES (2021)
Experimental study on laminated glass responses of high-speed trains subject to windblown sand particles loading
Gongxun Deng et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Impact vibration behavior of railway vehicles: a state-of-the-art overview
Lin Jing et al.
ACTA MECHANICA SINICA (2021)
Investigating the feasibility of a new testing method for GFRP/polymer foam sandwich composites used in railway passenger vehicles
Asim Onder et al.
COMPOSITE STRUCTURES (2020)
Post-impact flexural collapse modes of composite sandwich structures in Arctic conditions: Analytical prediction and experimental validation
M. H. Khan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Deflection analysis of clamped square sandwich panels with layered-gradient foam cores under blast loading
Xiongfei Zhou et al.
THIN-WALLED STRUCTURES (2020)
Experimental and numerical study of sandwich beams with layered-gradient foam cores under low-velocity impact
Lin Jing et al.
THIN-WALLED STRUCTURES (2019)
Numerical Investigation of the Effects of Sand Collision on the Aerodynamic Behaviour of a High-Speed Train Subjected to Yaw Angles
J. Wang et al.
JOURNAL OF APPLIED FLUID MECHANICS (2019)
Low-velocity impact response of sandwich beams with a metal foam core: Experimental and theoretical investigations
Xiang Chunping et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)
Failure analysis of adhesively bonded steel corrugated sandwich structures under three-point bending
Ye Yu et al.
COMPOSITE STRUCTURES (2018)
Response of aluminum corrugated sandwich panels under foam projectile impact - Experiment and numerical simulation
Xin Li et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2017)
A novel design for reinforcing the aircraft tail leading edge structure against bird strike
Jun Liu et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)
The effect of impactor shape on the low-velocity impact behavior of hybrid corrugated core sandwich structures
Jingxi Liu et al.
COMPOSITES PART B-ENGINEERING (2017)
The low velocity impact response of curvilinear-core sandwich structures
T. Boonkong et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)
Impact strength enhancement of aluminum tetrahedral lattice truss core structures
Jiagui Liu et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2015)
The low velocity impact response of sandwich beams with a corrugated core or a Y-frame core
L. St-Pierre et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)
Ballast flight under high-speed trains: Wind tunnel full-scale experimental tests
A. Premoli et al.
JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2015)
Experimental study on fatigue failure and damage of sandwich structure with PMI foam core
F. P. Yang et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2015)
Finite element simulation of PMMA aircraft windshield against bird strike by using a rate and temperature dependent nonlinear viscoelastic constitutive model
Jun Wang et al.
COMPOSITE STRUCTURES (2014)
Dynamic behavior of aluminum honeycomb sandwich panels under air blast: Experiment and numerical analysis
Xin Li et al.
COMPOSITE STRUCTURES (2014)
Response of aluminium corrugated sandwich panels under air blast loadings: Experiment and numerical simulation
Xin Li et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2014)
An experimental study of the dynamic response of cylindrical sandwich shells with metallic foam cores subjected to blast loading
Lin Jing et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2014)
The mechanical behaviour of corrugated-core sandwich panels
M. R. M. Rejab et al.
COMPOSITES PART B-ENGINEERING (2013)
Failure of AA 6061 and 2099 aluminum alloys under dynamic shock loading
A. G. Odeshi et al.
ENGINEERING FAILURE ANALYSIS (2013)
Impact response of aluminum corrugated core sandwich panels
H. N. G. Wadley et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2013)
The dynamic and quasi-static mechanical response of three aluminum armor alloys: 5059, 5083 and 7039
Sara J. Perez-Bergquist et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Split Hopkinson pressure bar multiple reloading and modeling of a 316 L stainless steel metallic hollow sphere structure
A. Tasdemirci et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)
Theoretical method for predicting the weight reduction rate of a box-type car body for rolling stock by material substitution design
J. S. Koo et al.
INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY (2009)
The dynamic response of end-clamped sandwich beams with a Y-frame or corrugated core
V. Rubino et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2008)
Impact damage resistance and tolerance of honeycomb core sandwich panels
K. S. Raju et al.
JOURNAL OF COMPOSITE MATERIALS (2008)
Dynamic crushing of sandwich panels with prismatic lattice cores
M. T. Tilbrook et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)
The response of clamped sandwich beams subjected to shock loading
DD Radford et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2006)
An experimental study on the behaviour under impact loading of metallic cellular materials
H Zhao et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2005)
Material characterization of a composite-foam sandwich for the front structure of a high speed train
G Belingardi et al.
COMPOSITE STRUCTURES (2003)
Optimal design of a flexural actuator
TJ Lu et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2001)