☆ 4.6 Article

Optoelectronic investigation and simulation study of zinc and cobalt doped lead halide perovskite nanocrystals

SOLAR ENERGY (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Opportunities of copper addition in CH3NH3PbI3 perovskite and their photovoltaic performance evaluation

Maria Khalid et al.

Summary: The inclusion of copper (Cu) facilitates near-infrared (NIR) absorption with a maximum PCE of 12.85%; the PCE using a 1:1 mixture of MAPbI(3) and MACu(x)I(3) is 12.43%; PSCs based on complete lead substitution with MACu(x)I(3) experience negligible PCE degradation up to 1000 hours.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Optics

Colloidal Synthesis and Tunable Multicolor Emission of Vacancy-Ordered Cs2HfCl6 Perovskite Nanocrystals

Siping Liu et al.

Summary: This study presents the colloidal synthesis of lead-free vacancy-ordered Cs2HfCl6 perovskite NCs using hafnium acetylacetonate as metal precursors and proposes a passivation strategy for sub-bandgap trap states by doping Sb3+ ions. Additionally, the introduction of lanthanide ions enables tunable multicolor emissions in Cs2HfCl6 NCs, providing effective strategies for tuning the optical properties of lead-free vacancy-ordered perovskite NCs.

LASER & PHOTONICS REVIEWS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Improved One- and Multiple-Photon Excited Photoluminescence from Cd2+-Doped CsPbBr3 Perovskite NCs

Ivan D. Skurlov et al.

Summary: Metal halide perovskite nanocrystals (NCs) have exceptional optical properties and are considered promising for nonlinear optical applications. B-site doping is a promising strategy to enhance their brightness and stability. However, there is a lack of study on the influence of B-site doping on the nonlinear optical properties of inorganic perovskite NCs. In this study, Cd2+ doping improved both the linear and nonlinear optical properties of CsPbBr3 NCs, with a two-photon absorption cross-section among the highest reported for CsPbBr3 NCs.

NANOMATERIALS (2022)

Add to Collection

Review Energy & Fuels

Stability and efficiency issues, solutions and advancements in perovskite solar cells: A review

Ritika Sharma et al.

Summary: Perovskite solar cells (PSCs) have shown great potential as an alternative renewable energy resource with competitive power conversion efficiency. However, PSCs still face stability issues and have a shorter lifetime compared to traditional silicon solar cells. This review focuses on the evolution of PSCs in terms of device architecture, electron transport, hole transport, and perovskite absorber layers to improve their PCE and stability. It also discusses the chemical nature, properties, commercialization status, and future outlook of PSCs.

SOLAR ENERGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Tracking the evolution of materials and interfaces in perovskite solar cells under an electric field

Juntao Hu et al.

Summary: The distribution of I-2 and PbI2 in perovskite solar cells is found to be even, while the electric field can cause chemical heterogeneity and device degradation. The instability of perovskite solar cells has been a challenging problem hindering the development of commercial panels.

COMMUNICATIONS MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Partial Substitution of Pb2+ in CsPbI3 as an Efficient Strategy To Design Fairly Stable All-Inorganic Perovskite Formulations

Marina Ustinova et al.

Summary: All-inorganic lead halide perovskites like CsPbI3 show higher stability in perovskite solar cells compared to hybrid analogues, but CsPbI3 absorbers undergo rapid phase transition at low temperatures. By substituting Pb2+ with specific cations, the stability of CsPbI3 films under realistic solar cell operation conditions was significantly enhanced, leading to improved efficiency in preliminary experiments.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Review Energy & Fuels

Lead-Less Halide Perovskite Solar Cells

Liam Gollino et al.

Summary: The rise and commercialization of perovskite solar cells are hindered by the toxicity of lead present in the perovskites as the solar light absorber. To counter this problem, lead can be fully (lead-free) or partially (lead-less) replaced by diverse elements, with partial replacement showing more promising results. Various methods to reduce the lead content in PSCs are discussed, including the partial replacement of lead by elements like Sn, Ge, Sr, and other transition metals. In addition, new families of perovskites based on the insertion of organic cations to replace lead and halogen units are presented, as well as atypical ways to reduce toxicity such as optimizing photon collection and using recycled lead.

SOLAR RRL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Hole transporting layer optimization for an efficient lead-free double perovskite solar cell by numerical simulation

Shambhavi Rai et al.

Summary: The double perovskite structured Cs2AgBiBr6 is attracting attention as a light harvester in perovskite solar cells. After testing various hole transporting materials, it was found that CuSbS2, MoO3, and Cu2O are the top three performing materials. By optimizing the thickness of the absorber and hole transporting layer, as well as the defect density in the absorber, the highest performing solar cell device was achieved with a power conversion efficiency of 9.98%.

OPTICAL MATERIALS (2021)

Add to Collection

Article Spectroscopy

XPS analysis of ZnS0.4Se0.6 thin films deposited by spray pyrolysis technique

Ganesha V. S. Krishna et al.

Summary: XPS analysis of spray deposited ZnS0.4Se0.6 thin films provides insights into the chemical composition and bonding of the II-VI ternary chalcogenide material, with particular attention to the overlapping peaks of Se 3p and S 2p. The observed binding energies and elemental composition in the study serve as reference for further research on ZnSSe material.

JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA (2021)

Add to Collection

Article Optics

All-Inorganic Rare-Earth-Based Double Perovskite Nanocrystals with Near-Infrared Emission

Ruixiang Wu et al.

Summary: Lead-free halide perovskite nanocrystals with unique optical properties have been synthesized successfully, showing sharp NIR photoluminescence at telecommunication wavelength. The enhancement of NIR PL and promotion of NIR emitting in mixed Sb/Er DP NCs has been demonstrated through femtosecond transient absorption measurements.

LASER & PHOTONICS REVIEWS (2021)

Add to Collection

Article Optics

Pulsed-Laser Detectors Based on Metal Halide Perovskites

Yalun Xu et al.

Summary: The introduction of an interfacial modification strategy in perovskite photodiodes effectively slows down photovoltage decay, enabling easy detection of modulated light emitting diodes and ultra-fast pulsed-lasers. These photodetectors based on polyvinylidene fluoride exhibit low noise voltage and high responsivity, showing great potential for real applications.

LASER & PHOTONICS REVIEWS (2021)

Add to Collection

Article Chemistry, Applied

Simultaneous passivation of bulk and interface defects through synergistic effect of anion and cation toward efficient and stable planar perovskite solar cells

Cong Zhang et al.

Summary: The study demonstrates a defect passivation strategy using potassium sulphate (K2SO4) modification, which effectively improves the efficiency and stability of perovskite solar cells by minimizing bulk and interface nonradiative recombination losses.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Review Chemistry, Physical

Lead-free metal halide perovskites for light-emitting diodes

Jianxun Lu et al.

Summary: Metal halide perovskites (MHPs) have been rapidly developed in recent years, with lead-based MHPs facing toxicity and instability issues. Lead-free MHPs (LFMHPs) show better environmental stability and broader emission regions, making significant progress. However, the performance of lead-free Pero-LEDs still lags behind their lead-based counterparts.

ECOMAT (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Tin and Mixed Lead-Tin Halide Perovskite Solar Cells: Progress and their Application in Tandem Solar Cells

Shuai Gu et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Energy & Fuels

Effect of absorber layer, hole transport layer thicknesses, and its doping density on the performance of perovskite solar cells by device simulation

Atanu Bag et al.

SOLAR ENERGY (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Influence of Electron Transport Layer (TiO2) Thickness and Its Doping Density on the Performance of CH3NH3PbI3-Based Planar Perovskite Solar Cells

R. Jeyakumar et al.

JOURNAL OF ELECTRONIC MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Origin of Sn(ii) oxidation in tin halide perovskites

Jorge Pascual et al.

MATERIALS ADVANCES (2020)

Add to Collection

Article Energy & Fuels

Electron and hole transport layers optimization by numerical simulation of a perovskite solar cell

Faiza Azri et al.

SOLAR ENERGY (2019)

Add to Collection

Article Chemistry, Physical

Stable Dynamics Performance and High Efficiency of ABX3-Type Super-Alkali Perovskites First Obtained by Introducing H5O2 Cation

Tingwei Zhou et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

NiO@carbon spheres: A promising composite electrode for scalable fabrication of planar perovskite solar cells at low cost

Sajid Sajid et al.

NANO ENERGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of density of surface defects on photoluminescence properties in MAPbI3 perovskite films

Paul Fassl et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Add to Collection

Article Chemistry, Physical

Defect passivation using ultrathin PTAA layers for efficient and stable perovskite solar cells with a high fill factor and eliminated hysteresis

Ming Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Alkali Metal Doping for Improved CH3NH3PbI3 Perovskite Solar Cells

Wangen Zhao et al.

ADVANCED SCIENCE (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Copper-Substituted Lead Perovskite Materials Constructed with Different Halides for Working (CH3NH3)(2)CuX4-Based Perovskite Solar Cells from Experimental and Theoretical View

Ahmed Mourtada Elseman et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Ion-Migration Inhibition by the Cation-π Interaction in Perovskite Materials for Efficient and Stable Perovskite Solar Cells

Dong Wei et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Pb-Sn-Cu Ternary Organometallic Halide Perovskite Solar Cells

Meng Li et al.

ADVANCED MATERIALS (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Perovskite solar cells: must lead be replaced - and can it be done?

Qi Zhang et al.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Computational Study of Ternary Devices: Stable, Low-Cost, and Efficient Planar Perovskite Solar Cells

Sajid Sajid et al.

NANO-MICRO LETTERS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Computational Study of Ternary Devices: Stable, Low-Cost, and Efficient Planar Perovskite Solar Cells

Sajid Sajid et al.

NANO-MICRO LETTERS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Acquiring High-Performance and Stable Mixed-Dimensional Perovskite Solar Cells by Using a Transition-Metal-Substituted Pb Precursor

Haiying Zheng et al.

CHEMSUSCHEM (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Computational Analysis of the Interplay between Deep Level Traps and Perovskite Solar Cell Efficiency

Kara Kearney et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Tailoring metal halide perovskites through metal substitution: influence on photovoltaic and material properties

Matthew T. Klug et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Experimental and simulation study for impact of different halides on the performance of planar perovskite solar cells

A. M. Elseman et al.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Enhanced Performance of Perovskite Solar Cells with Zinc Chloride Additives

Junjie Jin et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Review Chemistry, Physical

Charge-Carrier Dynamics in Organic-Inorganic Metal Halide Perovskites

Laura M. Herz

ANNUAL REVIEW OF PHYSICAL CHEMISTRY, VOL 67 (2016)

Add to Collection

Article Chemistry, Physical

Quantitative analysis of Fe and Co in Co-substituted magnetite using XPS: The application of non-linear least squares fitting (NLLSF)

Hongmei Liu et al.

APPLIED SURFACE SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

Halogen Effects on Ordering and Bonding of CH3NH3+ in CH3NH3PbX3 (X = Cl, Br, I) Hybrid Perovskites: A Vibrational Spectroscopic Study

Ralf G. Niemann et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Solvent-molecule-mediated manipulation of crystalline grains for efficient planar binary lead and tin triiodide perovskite solar cells

Leize Zhu et al.

NANOSCALE (2016)

Add to Collection

Article Multidisciplinary Sciences

Nonstoichiometric acid-base reaction as reliable synthetic route to highly stable CH3NH3PbI3 perovskite film

Mingzhu Long et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Chemistry, Physical

Impact of Monovalent Cation Halide Additives on the Structural and Optoelectronic Properties of CH3NH3PbI3 Perovskite

Mojtaba Abdi-Jalebi et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Easily Attainable, Efficient Solar Cell with Mass Yield of Nanorod Single-Crystalline Organo-Metal Halide Perovskite Based on a Ball Milling Technique

Ahmed Mourtada Elseman et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Photophysics of Organic-Inorganic Hybrid Lead Iodide Perovskite Single Crystals

Hong-Hua Fang et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

Add to Collection

Editorial Material Chemistry, Inorganic & Nuclear

Perovskites

J. Paul Attfield et al.

DALTON TRANSACTIONS (2015)

Add to Collection

Article Chemistry, Physical

Infrared Spectroscopic Study of Vibrational Modes in Methylammonium Lead Halide Perovskites

Tobias Glaser et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Add to Collection

Article Energy & Fuels

Micrometer-Scale Deep-Level Spectral Photoluminescence From Dislocations in Multicrystalline Silicon

Hieu T. Nguyen et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Heterojunction Modification for Highly Efficient Organic - Inorganic Perovskite Solar Cells

Konrad Wojciechowski et al.

ACS NANO (2014)

Add to Collection

Article Physics, Applied

Microstructures and photovoltaic properties of perovskite-type CH3NH3PbI3 compounds

Takeo Oku et al.

APPLIED PHYSICS EXPRESS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

The origin of high efficiency in low-temperature solution-processable bilayer organometal halide hybrid solar cells

Shuangyong Sun et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

The Raman Spectrum of the CH3NH3Pbl3 Hybrid Perovskite: Interplay of Theory and Experiment

Claudio Quarti et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Anomalous Band Gap Behavior in Mixed Sn and Pb Perovskites Enables Broadening of Absorption Spectrum in Solar Cells

Feng Hao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Add to Collection

Article Chemistry, Physical

Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells

Nam Joong Jeon et al.

NATURE MATERIALS (2014)

Add to Collection

Article Chemistry, Physical

Structural and electronic properties of organo-halide lead perovskites: a combined IR-spectroscopy and ab initio molecular dynamics investigation

Edoardo Mosconi et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)

Add to Collection

Editorial Material Chemistry, Physical

Photonic design principles for ultrahigh-efficiency photovoltaics

Albert Polman et al.

NATURE MATERIALS (2012)

Add to Collection

Article Energy & Fuels

A new simulation software of solar cells-wxAMPS

Yiming Liu et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)

Add to Collection

Article Multidisciplinary Sciences

Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%

Hui-Seon Kim et al.

SCIENTIFIC REPORTS (2012)

Add to Collection

Review Microbiology

Fourier transform infrared as a powerful technique for the identification and characterization of filamentous fungi and yeasts

Cledir Santos et al.

RESEARCH IN MICROBIOLOGY (2010)

Add to Collection

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

Article Chemistry, Multidisciplinary

Spectroscopic and functional determination of the interaction of Pb2+ with GATA proteins

AB Ghering et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.