☆ 4.7 Article

Ball-milling fabrication of n-p heterojunctions Bi4O5Br2/α-MnS with strengthened photocatalytic removal of bisphenol A in a Z-Scheme model

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Strengthened photocatalytic removal of bisphenol a by robust 3D hierarchical n-p heterojunctions Bi4O5Br2-MnO2 via boosting oxidative radicals generation

Fei Chang et al.

Summary: The study focused on enhancing the removal of environmental hormones through the design and creation of a 3D hierarchical composite Bi4O5Br2MnO2 (MB) with improved photocatalytic degradation of bisphenol A (BPA). The best candidate 0.5 MB showed significantly higher Kapp value and boosted generation of oxidative radicals in a Z-Scheme model. Factors influencing photocatalytic degradation performance were explored, and intermediates detected by GC-MS analysis provided insights into the degradation pathway of these robust composites.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Multidisciplinary

Enhanced photocatalytic NO removal with the superior selectivity for NO2- /NO3- species of Bi12GeO20-based composites via a ball-milling treatment: Synergetic effect of surface oxygen vacancies and n-p heterojunctions

Fei Chang et al.

Summary: Bi12GeO20-based composites Bi12GeO20-Bi2S3 (BGS) were constructed through ball-milling method using sulfur powder for the first time. These composites showed enhanced photocatalytic removal of NO at ppb level under visible light with high selectivity for NO2-/NO3- species, avoiding the generation of toxic NO2. The in-situ generation of n-p heterojunctions with surface OVs and the enhanced visible-light absorption were crucial factors in the improved performance of the BGS composites.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Review Environmental Sciences

Ag3PO4-based photocatalysts and their application in organic-polluted wastewater treatment

Chunmu Yu et al.

Summary: Semiconductor photocatalysis technology utilizing solar energy has great potential in organic pollutant removal. Silver phosphate (Ag3PO4) is a visible light responsive semiconductor photocatalyst with strong oxidation ability, but electron sacrifice agents are required for its high oxidation activity. This review discusses the structural characteristics, preparation methods, and approaches to enhance the catalytic activity and recycling efficiency of Ag3PO4-based catalysts. It provides insights into the advantages and disadvantages of Ag3PO4 in photocatalysis and offers valuable information for the treatment of organic polluted wastewater.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

Add to Collection

Article Chemistry, Physical

Ionic liquid-assisted fabrication of metal-organic framework-derived indium oxide/bismuth oxyiodide p-n junction photocatalysts for robust photocatalysis against phenolic pollutants

Meng Sun et al.

Summary: Constructing a p-n heterojunction is an effective strategy to manipulate the dynamic behaviors of photo-generated carriers. In this study, a novel highly efficient In2O3/BiOI p-n junction photocatalyst was fabricated, which showed superior visible light-responsive photocatalytic activities. The enhanced performance can be attributed to rapid interfacial charge transfer, decreased carrier recombination, and appropriate band potentials.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Rational design of n-Bi12TiO20@p-BiOI core-shell heterojunction for boosting photocatalytic NO removal

Hongxia Liu et al.

Summary: The combination of BiOI nanosheets on BTO nanofibers to create a BTO@BiOI heterojunction enhances the photocatalytic performance by improving charge transfer ability and expanding light absorption range. This heterojunction shows improved NO removal efficiency compared to pure BTO or BiOI, and exhibits good stability and reusability.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Strong Metal-Support Interaction Boosts Activity, Selectivity, and Stability in Electrosynthesis of H2O2

Junming Zhang et al.

Summary: Noble metals play a crucial role in electrochemical reactions, but their usage is limited due to high overpotential and poor stability. By modulating strong metal-support interaction (SMSI) through mechanical milling, the overall performance of Pd electrocatalysts has been improved in terms of activity, selectivity, and stability. This approach can also be extended to other noble metal systems, showing great promise for the large-scale production of highly stable and tunable electrocatalysts.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2022)

Add to Collection

Article Engineering, Chemical

Boosted photocatalytic NO removal performance by S-scheme hierarchical composites WO3/Bi4O5Br2 prepared through a facile ball-milling protocol

Fei Chang et al.

Summary: Hierarchical composites WO3/Bi4O5Br2 were successfully fabricated by ball-milling, showing high photocatalytic capability for NO removal and avoidance of toxic NO2 formation. These composites exhibited reinforced NO removal efficiency under visible light irradiation, suggesting a possible photocatalysis mechanism in a S-scheme model.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

Heterovalent substitution of Nb5+, Ta5+ on Te4+ sites and induced modification on luminescence and photocatalysis of Te-V mixed oxide Te2V2O

Zhuo Zheng et al.

Summary: This study investigates the modification of photochemical properties by Nb5+- and Ta5+-doping in Te2V2O9 materials. The results show that Nb5+ doping significantly improves the photodegradation performance. The experiments demonstrate that multivalent ion doping can suppress luminescence and enhance photocatalytic activity, with the V5+/4+ redox couple induced by Nb5+ doping contributing to the photocatalysis.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Chemistry, Physical

Magnetron sputtered TiO2/CuO heterojunction thin films for efficient photocatalysis of Rhodamine B

Baofei Hao et al.

Summary: TiO2-based heterojunction nano-thin films with CuO underlayer were prepared by magnetron sputtering. The thickness of the upper TiO2 layer and underlying CuO layer could be precisely controlled. The optimized heterojunction film exhibited excellent photocatalytic activity for Rhodamine B degradation.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Engineering, Chemical

Type-II surface heterojunction of bismuth-rich Bi4O5Br2 on nitrogen-rich g-C3N5 nanosheets for efficient photocatalytic degradation of antibiotics

Zhengqing Cai et al.

Summary: A novel g-C3N5/Bi4O5Br2 surface heterojunction was developed for efficient sulfathiazole degradation, achieving remarkable charge transfer and separation through matched energy band structure, showing promising application potential.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Engineering, Chemical

Efficient activation of peroxymonosulfate by MnS/Fe-MOF hybrid catalyst for sulfadiazine degradation: Synergistic effects and mechanism

Xiaolin Han et al.

Summary: In this work, MnS/Fe-MOF composites were synthesized and used for efficient degradation of sulfadiazine in water. The synthesized MnS/Fe-MOF exhibited excellent catalytic performance, surpassing other catalysts. The mechanism of activation involved the participation of various species, and the synergistic effects between multivalent Mn, Fe and S species were observed. This study provides insights into the synthesis and applications of MnS/Fe-MOF composites as efficient activators for antibiotic degradation.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Engineering, Chemical

Fabrication of Bi12GeO20/Bi2S3 hybrids with surface oxygen vacancies by a facile CS2-mediated manner and enhanced photocatalytic performance in water and saline water

Fei Chang et al.

Summary: A series of biphasic hybrids Bi12GeO20/Bi2S3 containing surface oxygen vacancies (OVs) were successfully constructed. These hybrids demonstrated enhanced photocatalytic degradation performance under visible light, mainly attributed to augmented visible-light harvesting, efficient spatial separation of charge carriers over interface by n-p heterojunction, and the presence of sufficient surface OVs.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

Strengthened photocatalytic removal of bisphenol A under visible light by magnetic ternary heterojunctions Bi4O5Br2/Bi4O5I2/Fe3O4

Fei Chang et al.

Summary: Magnetic ternary composites Bi4O5Br2/Bi4O5I2/Fe3O4 (BBF) were synthesized through a facile one-pot route by combining exotic Fe3O4 nanoparticles and controllable molar ratios of Br to I in Bi4O5Br2/Bi4O5I2. The microstructural, morphological, and optical features of the achieved composites were thoroughly characterized. The results showed that the expected components formed efficient heterojunction structures. The BBF composites exhibited enhanced photocatalytic removal of bisphenol A under visible light illumination, with the best candidate BBF (3:7) showing the highest apparent reaction rate constant. This was attributed to the shrinkage of band gaps, the harmony of various morphologies, the suitable phase composition, and the promoted segregation of charge carriers by ternary heterojunctions with proper band structures. Recycling experiments and improved photocatalytic outcome confirmed the potential and applicability of these magnetic composites in environmental protection and energy reservation.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Chemistry, Physical

In-situ synthesis of metal Bi to improve the stability of oxygen vacancies and enhance the photocatalytic activity of Bi4O5Br2 in H2 evolution

Liye Zhao et al.

Summary: In this study, Bi(4)O(5)Br(2) modified by metal Bi and oxygen vacancies (Bi-OVs-Bi4O5Br2) were prepared to improve the stability and photocatalytic activity. The modified catalyst exhibited excellent performance and provided new insights for the design of highly-efficient Bi-based photocatalysts.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Chemistry, Physical

In-situ construction of step-scheme MoS2/Bi4O5Br2 heterojunction with improved photocatalytic activity of Rhodamine B degradation and disinfection

Huanxian Shi et al.

Summary: A novel Step-scheme MoS2/Bi4O5Br2 heterojunction was fabricated and its photocatalytic activity for the degradation of Rhodamine B (RhB) and inactivation of E.coli was investigated. The MoS2/Bi4O5Br2 heterojunction exhibited enhanced photocatalytic ability compared to pure Bi(4)O(5)B(r)2 and MoS2, with the MoS2/Bi4O5Br2-3% (MS/BOB-3) heterojunction showing the highest activity. The photocatalytic mechanism was attributed to the generation of active species, and the transfer pathway of charge carriers followed a Step-scheme channel.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Rationally designed Ta3N5/BiOCl S-scheme heterojunction with oxygen vacancies for elimination of tetracycline antibiotic and Cr(VI): Performance, toxicity evaluation and mechanism insight

Shijie Li et al.

Summary: Ta3N5/BiOCl photocatalyst with oxygen vacancies (OVs) in an S-scheme heterojunction exhibits enhanced photocatalytic performance under visible light, attributed to the synergistic effect of the hetero-structure and OVs. It shows great potential for water decontamination.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Engineering, Environmental

Ultra-stable Bi4O5Br2/Bi2S3 n-p heterojunctions induced simultaneous generation of radicals •OH and •O2- and NO conversion to nitrate/nitrite species with high selectivity under visible light

Fei Chang et al.

Summary: The study developed composite Bi4O5Br2/Bi2S3 through anion exchange to improve NOx removal while avoiding toxic NO2 formation. The composites showed enhanced selectivity and efficiency under visible light due to improved radical generation, light absorption, and band structure matching in the Z-scheme mode. The ultra-stable composites could be used for multiple runs without loss of catalytic performance, offering a promising solution for total NOx removal without NO2 formation or emission.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

In situ construction of oxygen-vacancy-rich Bi0@Bi2WO6-x microspheres with enhanced visible light photocatalytic for NO removal

Xiaoqian Xie et al.

Summary: This study prepared oxygen-deficient Bi2WO6 microspheres and deposited Bi-0 nanoparticles on the surface, enhancing photocatalytic activity. Bi-0@Bi2WO6-x exhibited the best NO removal activity under visible light irradiation. The presence of Bi-0 nanoparticles promoted photogenerated charge separation and transfer, while OVs defects facilitated reactants activation and active substance formation.

CHINESE CHEMICAL LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Atomic interfacial structure and charge transfer mechanism on in-situ formed BiOI/Bi2O2SO4 p-n heterojunctions with highly promoted photocatalysis

Qin Geng et al.

Summary: This study introduces a novel Bi-based photocatalyst, the BiOI/Bi2O2SO4 heterojunction, developed using visible light as the inducing light source. This heterojunction significantly enhances the photocatalytic NO oxidation activity, promotes the separation of photogenerated electron-hole pairs, activates reactants and generates reactive oxygen species, and prevents the formation of toxic nitrogen oxides.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Add to Collection

Article Chemistry, Physical

In situ preparation of 3D flower sphere Bi4O5Br2/Bi24O31Br10 heterojunctions by calcination for enhanced antibiotic degradation

Wang Cao et al.

Summary: A 3D flower sphere Bi4O5Br2/Bi24O31Br10 heterojunction was prepared successfully through solvothermal method and subsequent calcination, showing significantly stronger light absorption and photocurrent responses compared to pure components. BOB-300 exhibited the highest photocatalytic performance for the degradation of CIP and TC, with center dot O-2(-) identified as playing a primary role in the photocatalytic process.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection

Article Energy & Fuels

Hydrothermally synthesized α-MnS nanostructures for electrochemical water oxidation and photocatalytic hydrogen production

S. Swathi et al.

Summary: The study focused on manganese-based nanostructures prepared using hydrothermal technique with different concentrations of hydrazine hydrate, showing improved morphology and conductivity. The MnS nanostructures exhibited high specific capacitance, current density, and low overpotential, controlled by the reducing agent. Photocatalytic hydrogen production displayed promising results for MnS@4 ml HZH sample under light irradiation.

FUEL (2021)

Add to Collection

Article Environmental Sciences

Bifunctional Bi12O17Cl2/MIL-100(Fe) composites toward photocatalytic Cr(VI) sequestration and activation of persulfate for bisphenol A degradation

Chen Zhao et al.

Summary: BM200 composite showed efficient Cr(VI) sequestration and PS activation under white light, outperforming the pristine materials. Addition of SOAs significantly improved photocatalytic reduction efficiency, and BPA degradation was achieved over a wide pH range.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Engineering, Chemical

Enhanced photocatalytic conversion of NOx with satisfactory selectivity of 3D-2D Bi4O5Br2-GO hierarchical structures via a facile

Fei Chang et al.

Summary: A novel series of 3D-2D Bi4O5Br2-GO hierarchical composites were successfully fabricated via a facile microwave-assisted method, showing significant enhancement in photocatalytic capability for NOx removal. Particularly, the best catalog Bi4O5Br2-GO1.6 exhibited outstanding NOx conversion rate and selectivity, attributed to the structure and photocatalytic mechanism of the composites.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Bio-CQDs surface modification BiOCl for the BPA elimination and evaluation in visible light: The contribution of C-localized level

Qishi Si et al.

Summary: This study confirmed the feasibility of bio-CQDs/BiOCl preparation as a photocatalyst to remove and detoxify BPA under visible light. CQDs play a key role in the BPA degradation process, effectively improving the efficiency of charge separation and injection. Possible BPA degradation pathways were proposed, and ecotoxicity evaluation of intermediates was conducted, showing a decrease in toxicity for most of the intermediates.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Double Z-scheme FeVO4/Bi4O5Br2/BiOBr ternary heterojunction photocatalyst for simultaneous photocatalytic removal of hexavalent chromium and rhodamine B

Auttaphon Chachvalvutikul et al.

Summary: The fabrication of heterojunction photocatalysts with appropriate band potentials is an effective method to enhance photocatalytic properties by inhibiting electron-hole pair recombination. In this study, BiOBr, Bi4O5Br2, and Binary BiOBr/Bi4O5Br2 composites were synthesized using microwave irradiation, followed by the fabrication of FeVO4/Bi4O5Br2/BiOBr ternary composites with different weight percentages of FeVO4 for photocatalytic applications. The 1%wt-FeVO4/Bi4O5Br2/BiOBr photocatalyst showed superior visible-light-driven photocatalytic performance, with improved Cr(VI) photoreduction and simultaneous degradation of RhB in a combined system. Adjusting pH values and catalyst dosages maximized the removal of Cr(VI) and RhB. The study proposed a double Z-scheme charge transfer mechanism with an RhB-sensitized effect, leading to significant enhancement in charge segregation and migration, and higher redox properties of the ternary composite, resulting in excellent photocatalytic activity.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Synthesis of palladium-modified MnS photocatalysts with enhanced photocatalytic activity in the photoreduction of CO2 to CH4

Hanbo Li et al.

Summary: α-MnS and γ-MnS photocatalysts were synthesized using the hydrothermal method, and their photocatalytic activity for CO2 photoreduction was enhanced by surface modification with Pd ions, indicating the effectiveness of this approach for the development of active photocatalysts.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

An atom-economy route for the fabrication of α-MnS@C microball with ultrahigh supercapacitance: The significance of in-situ vulcanization

Li-Ying Zhang et al.

Summary: This study introduced a facile and low-cost process of in-situ vulcanization to prepare alpha-MnS@C composite, which exhibits high specific capacitance and cycling stability, making it suitable for supercapacitor applications.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Synthesis, characterization and visible light-responsive photocatalysis properties of Ce doped CuO nanoparticles: A combined experimental and DFT plus U study

Muhammad Rakibul Islam et al.

Summary: CuO and Ce doped CuO nanoparticles were prepared through the sol-gel auto-combustion process, with Ce doping reducing the optical bandgap and enhancing photocatalytic performance. DFT based simulations predicted improvements in photocatalytic efficiency with Ce doping.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection

Article Engineering, Environmental

Photocatalytic degradation of antibiotics using a novel Ag/Ag2S/Bi2MoO6 plasmonic p-n heterojunction photocatalyst: Mineralization activity, degradation pathways and boosted charge separation mechanism

Shijie Li et al.

Summary: A novel Ag/Ag2S/Bi2MoO6 plasmonic p-n heterojunction was successfully constructed, showing excellent photocatalytic performance and efficient degradation of pharmaceutical antibiotics in water resources. The improved light absorption and charge carrier separation and transport were identified as key factors for performance enhancement.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Environmental Sciences

In vivo and in vitro transcriptomics meta-analyses reveal that BPA may affect TGF-beta signaling regardless of the toxicology system employed

Yuanping Lu et al.

Summary: The study collected global transcriptomics datasets for BPA-exposed organisms and cells, and found that BPA may affect basic cellular processes independently of species and specific systems, regulating cell-ECM interactions via TGF-β signaling pathways. Additionally, the study verified that the in vitro BPA-dependent mouse embryoid body system efficiently recapitulates in vivo and other in vitro findings.

ENVIRONMENTAL POLLUTION (2021)

Add to Collection

Article Chemistry, Physical

Plasmonic Bi-enhanced ammoniated α-MnS/Bi2MoO6 S-scheme heterostructure for visible-light-driven CO2 reduction

Lizhong Liu et al.

Summary: The study successfully fabricated a special electron transport structure that prevents photocorrosion of metal sulfides and enhances the redox ability of photocatalysts; Ammoniated ammonium ions facilitate the combination with CO2, reducing its activation energy and improving CO2 reduction efficiency.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Engineering, Environmental

Characterization of nano-to-micron sized respirable coal dust: Particle surface alteration and the health impact

Rui Zhang et al.

Summary: The chemical and physical properties of coal dust particles significantly affect the inhalation of respirable coal dust by miners, leading to lung diseases such as CWP and silicosis. Various experimental techniques were used to comprehensively investigate the properties of micron-/nano-coal particles, showing that nano-coal dust has higher carbon content and aromaticity, lower oxygen content, and reduced oxygen-containing functional groups compared to micron-scale coal dust. The increased pore volume and surface area in nano-coal dust, estimated by low-pressure CO2 and N-2 adsorption, suggest potentially higher toxicity when inhaled by coal miners due to weaker wettability and enhanced surface area.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Drivers of owning more BPA

Md Saidur Rahman et al.

Summary: Bisphenol A (BPA) is a common environmental toxin, despite documented toxicity, it is still widely used in consumer products. Factors influencing human exposure to BPA include material properties, lack of health education, fear of BPA substitutes, inappropriate production, and regulatory guidance.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Bisphenol A attenuation in natural microcosm: Contribution of ecological components and identification of transformation pathways through stable isotope tracing

Yan Li et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Engineering, Chemical

In-situ constructing Bi2S3 nanocrystals-modified Bi12O17Cl2 nanosheets with features of rich oxygen vacancies and reinforced photocatalytic performance

Fei Chang et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Insights into the enhanced adsorption/photocatalysis mechanism of a Bi4O5Br2/g-C3N4 nanosheet

Futao Yi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Environmental Sciences

NaOH-induced formation of 3D flower-sphere BiOBr/Bi4O5Br2 with proper-oxygen vacancies via in-situ self-template phase transformation method for antibiotic photodegradation

Panjie Li et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Add to Collection

Article Engineering, Chemical

N-p heterojunction Bi4O5I2/Fe3O4 composites with efficiently magnetic recyclability and enhanced visible-light-driven photocatalytic performance

Fei Chang et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Z-scheme photocatalytic production of hydrogen peroxide over Bi4O5Br2/g-C3N4 heterostructure under visible light

Xuesong Zhao et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2020)

Add to Collection

Article Engineering, Environmental

Facile construction of novel Bi2WO6/Ta3N5 Z-scheme heterojunction nanofibers for efficient degradation of harmful pharmaceutical pollutants

Shijie Li et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

Hydrothermal synthesis of photoactive nitrogen- and boron- codoped TiO2 nanoparticles for the treatment of bisphenol A in wastewater: Synthesis, photocatalytic activity, degradation byproducts and reaction pathways

Wael H. M. Abdelraheem et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

Add to Collection

Article Chemistry, Physical

A bismuth rich hollow Bi4O5Br2 photocatalyst enables dramatic CO2 reduction activity

Xiaoli Jin et al.

NANO ENERGY (2019)

Add to Collection

Article Chemistry, Physical

MnS coupled with ultrathin MoS2 nanolayers as heterojunction photocatalyst for high photocatalytic and photoelectrochemical activities

Xuan Chen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Review Cell Biology

Regulatory identification of BPA as an endocrine disruptor: Context and methodology

Claire Beausoleil et al.

MOLECULAR AND CELLULAR ENDOCRINOLOGY (2018)

Add to Collection

Review Toxicology

Bisphenol A (BPA) the mighty and the mutagenic

Nasir Jalal et al.

TOXICOLOGY REPORTS (2018)

Add to Collection

Article Chemistry, Physical

Preparation and formation process of α-MnS@MoS2 microcubes with hierarchical core/shell structure

Xin Cao et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Photodegradation of carbamazepine with BiOCl/Fe3O4 catalyst under simulated solar light irradiation

Hongche Chen et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis of manganese sulfide (MnS) thin films by chemical bath deposition and their characterization

Sunil H. Chaki et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2017)

Add to Collection

Article Chemistry, Physical

Noble-metal-free MnS/In2S3 composite as highly efficient visible light driven photocatalyst for H2 production from H2S

Meng Dan et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Add to Collection

Article Environmental Sciences

Removal of bisphenol A by electrochemical carbon-nanotube filter: Influential factors and degradation pathway

Ahmed Refaat Bakr et al.

CHEMOSPHERE (2017)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Novel p-n heterojunction BiOI/CeO2 photocatalyst for wider spectrum visible-light photocatalytic degradation of refractory pollutants

Xiao-Ju Wen et al.

DALTON TRANSACTIONS (2017)

Add to Collection

Review Environmental Sciences

Adsorptive removal of bisphenol A (BPA) from aqueous solution: A review

Amit Bhatnagar et al.

CHEMOSPHERE (2017)

Add to Collection

Article Chemistry, Physical

Oxygen vacancies, the optical band gap (Eg) and photocatalysis of hydroxyapatite: Comparing modelling with measured data

V. S. Bystrov et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2016)

Add to Collection

Article Electrochemistry

One-pot synthesis of α-MnS/nitrogen-doped reduced graphene oxide hybrid for high-performance asymmetric supercapacitors

Hongying Quan et al.

ELECTROCHIMICA ACTA (2016)

Add to Collection

Article Engineering, Environmental

Efficient activation of peroxymonosulfate by magnetic Mn-MGO for degradation of bisphenol A

Jiangkun Du et al.

JOURNAL OF HAZARDOUS MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Tuning the morphology of metastable MnS films by simple chemical bath deposition technique

T. Dhandayuthapani et al.

APPLIED SURFACE SCIENCE (2015)

Add to Collection

Article Chemistry, Physical

Structural stability and electronic structures of (111) twin boundaries in the rock-salt MnS

Y. B. Xue et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Add to Collection

Article Chemistry, Physical

Anion exchange strategy for construction of sesame-biscuit-like Bi2O2CO3/Bi2MoO6 nanocomposites with enhanced photocatalytic activity

Yang-Sen Xu et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Ball milling: a green mechanochemical approach for synthesis of nitrogen doped carbon nanoparticles

Tan Xing et al.

NANOSCALE (2013)

Add to Collection

© Peeref 2019-2024. All rights reserved.