☆ 4.6 Article

Physics-Guided Real-Time Full-Field Vibration Response Estimation from Sparse Measurements Using Compressive Sensing

SENSORS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Civil

Data-driven full-field vibration response estimation from limited measurements in real-time using dictionary learning and compressive sensing

Debasish Jana et al.

Summary: Full-field online sensing provides dense spatial information of vibrating structures in real-time. Computer vision-based technologies can capture dense responses, but long-term implementation of such techniques could be expensive and impractical. To address these problems, we propose a framework to estimate full-field vibration responses from a few sensors. This framework does not require any prior information on the structural model and shows excellent potential in health monitoring and control of various systems.

ENGINEERING STRUCTURES (2023)

Add to Collection

Article Multidisciplinary Sciences

Near-infrared photoluminescence of Portland cement

Wei Meng et al.

Summary: Portland cement emits bright near-infrared photoluminescence that can be excited by specific light wavelengths. The source of this emission is believed to be small particles of silicon associated with calcium silicate phases. Near-infrared luminescence imaging provides a non-contact method for identifying different types of cement and detecting microcracks in cement-based structures.

SCIENTIFIC REPORTS (2022)

Add to Collection

Article Engineering, Civil

Real-time cable tension estimation from acceleration measurements using wireless sensors with packet data losses: analytics with compressive sensing and sparse component analysis

Debasish Jana et al.

Summary: Stay-cables in cable-stayed bridges are vital components that require continuous real-time performance monitoring. Wireless sensors provide accurate measurement without wiring cost, but data loss during transmission may interrupt real-time monitoring, which can be addressed through data processing. Monitoring cable health using multiple sensors reduces estimation errors and a proposed framework utilizes compressive sensing algorithm and Blind Source Separation Technique to estimate real-time tension effectively.

JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2022)

Add to Collection

Article Engineering, Mechanical

Measurement and identification of the nonlinear dynamics of a jointed structure using full-field data; Part II- Nonlinear system identification

Mengshi Jin et al.

Summary: This paper investigates the nonlinear characteristics of jointed beams using various identification methods to characterize their dynamic properties. Through a series of experiments and high-resolution data, the nonlinearities are identified and validated.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Mechanical

Measurement and identification of the nonlinear dynamics of a jointed structure using full-field data, Part I: Measurement of nonlinear dynamics

Wei Chen et al.

Summary: This research aims to extend traditional experimental methods for linear system identification to nonlinear jointed systems by augmenting them with full-field data collected by high-speed videography. The study uses Digital Image Correlation to analyze the spatial-temporal dynamic characteristics of the system, introducing new sources of experimental error.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Mechanical

CNN and Convolutional Autoencoder (CAE) based real-time sensor fault detection, localization, and correction

Debasish Jana et al.

Summary: This research introduces a novel deep learning framework for identifying faults in sensor data, locating the faulty sensors, and reconstructing the correct sensor data. The framework performs well in both single and multiple sensor faults and demonstrates high computational efficiency.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Construction & Building Technology

Computer vision-based real-time cable tension estimation algorithm using complexity pursuit from video and its application in Fred-Hartman cable-stayed bridge

Debasish Jana et al.

Summary: This paper presents a framework that uses video-based measurement as multiple sensors to reduce the estimation error in determining the real-time cable tension. The proposed algorithm is validated on an actual cable-stayed bridge and compared with conventional methods, showing smaller estimation error and significant potential in the field of structural health monitoring.

STRUCTURAL CONTROL & HEALTH MONITORING (2022)

Add to Collection

Article Multidisciplinary Sciences

Next-generation 2D optical strain mapping with strain-sensing smart skin compared to digital image correlation

Wei Meng et al.

Summary: This study presents the next generation optical strain measurement using strain-sensing smart skin (S-4) and compares its performance with the established digital image correlation (DIC) method. The results show that S-4 can provide more clear strain features and better agreement with finite element method simulations compared to DIC. These findings suggest that S-4 strain measurement technology has the potential to be a promising alternative or complement to existing technologies, especially in detecting accumulated strains in structures that are not continuously observed.

SCIENTIFIC REPORTS (2022)

Add to Collection

Article Construction & Building Technology

Instantaneous Spectral Entropy: An Application for the Online Monitoring of Multi-Storey Frame Structures

Marco Civera et al.

Summary: This article presents a damage assessment technique based on entropy measurements for structural health monitoring of civil structures and infrastructures. The method utilizes instantaneous spectral entropy to detect sudden structural changes and operates by comparing frames of vibration signals to a known baseline.

BUILDINGS (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Online structural health monitoring by model order reduction and deep learning algorithms

Luca Rosafalco et al.

Summary: This study proposes a simulation-based classification strategy within a structural health monitoring framework to achieve online damage localization by combining parametric Model Order Reduction techniques and Fully Convolutional Networks. The trained classifier is able to accurately map vibrational recordings to the actual damage state, providing information on damage existence and location. The strategy has been validated through two case studies with significant speed improvements and high accuracy achieved after training.

COMPUTERS & STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

Computer vision-based real-time cable tension estimation in Dubrovnik cable-stayed bridge using moving handheld video camera

Debasish Jana et al.

Summary: This study proposes a video-based stay-cable tension measurement technique for monitoring the health of cables without contact, using image processing techniques to eliminate camera movements. The technology allows real-time tension measurement of stay-cables even in adverse weather conditions, showing promising potential for structural health monitoring.

STRUCTURAL CONTROL & HEALTH MONITORING (2021)

Add to Collection

Article Engineering, Civil

Structural displacement monitoring using deep learning-based full field optical flow methods

Chuan-Zhi Dong et al.

STRUCTURE AND INFRASTRUCTURE ENGINEERING (2020)

Add to Collection

Article Engineering, Multidisciplinary

Determining the number of measurements for compressive sensing of traffic-induced vibration data

Fereidoun Amini et al.

MEASUREMENT (2020)

Add to Collection

Article Acoustics

Identification of full-field dynamic modes using continuous displacement response estimated from vibrating edge video

Sutanu Bhowmick et al.

JOURNAL OF SOUND AND VIBRATION (2020)

Add to Collection

Article Engineering, Mechanical

Measurement of full-field displacement time history of a vibrating continuous edge from video

Sutanu Bhowmick et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Add to Collection

Article Engineering, Mechanical

Full-field structural monitoring using event cameras and physics-informed sparse identification

Zhilu Lai et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Physics-informed neural networks: A deep learning framework for solving forward and inverse problems involving nonlinear partial differential equations

M. Raissi et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2019)

Add to Collection

Article Engineering, Mechanical

Sparse structural system identification method for nonlinear dynamic systems with hysteresis/inelastic behavior

Zhilu Lai et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Acoustics

Fisher information-based optimal input locations for modal identification

Debasish Jana et al.

JOURNAL OF SOUND AND VIBRATION (2019)

Add to Collection

Review Computer Science, Information Systems

A Systematic Review of Compressive Sensing: Concepts, Implementations and Applications

Meenu Rani et al.

IEEE ACCESS (2018)

Add to Collection

Article Construction & Building Technology

Robust data transmission and recovery of images by compressed sensing for structural health diagnosis

Yongchao Yang et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2017)

Add to Collection

Article Automation & Control Systems

Online feature learning for condition monitoring of rotating machinery

S. Martin-del-Campo et al.

ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2017)

Add to Collection

Article Acoustics

Vibration-based monitoring and diagnostics using compressive sensing

Vaahini Ganesan et al.

JOURNAL OF SOUND AND VIBRATION (2017)

Add to Collection

Article Construction & Building Technology

Pixel-wise structural motion tracking from rectified repurposed videos

Ali Khaloo et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2017)

Add to Collection

Article Engineering, Mechanical

A simple damage detection indicator using operational deflection shapes

R. P. C. Sampaio et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)

Add to Collection

Article Engineering, Mechanical

Bayesian compressive sensing for approximately sparse signals and application to structural health monitoring signals for data loss recovery

Yong Huang et al.

PROBABILISTIC ENGINEERING MECHANICS (2016)

Add to Collection

Article Multidisciplinary Sciences

Discovering governing equations from data by sparse identification of nonlinear dynamical systems

Steven L. Brunton et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Toward Practical Non-Contact Optical Strain Sensing Using Single-Walled Carbon Nanotubes

Peng Sun et al.

ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2016)

Add to Collection

Article Acoustics

Modal identification of simple structures with high-speed video using motion magnification

Justin G. Chen et al.

JOURNAL OF SOUND AND VIBRATION (2015)

Add to Collection

Article Engineering, Mechanical

Carbon nanotubes as non-contact optical strain sensors in smart skins

Peng Sun et al.

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2015)

Add to Collection

Article Construction & Building Technology

Compressive sensing-based lost data recovery of fast-moving wireless sensing for structural health monitoring

Yuequan Bao et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2015)

Add to Collection

Article Instruments & Instrumentation

Compressed sensing embedded in an operational wireless sensor network to achieve energy efficiency in long-term monitoring applications

S. M. O'Connor et al.

SMART MATERIALS AND STRUCTURES (2014)

Add to Collection

Article Construction & Building Technology

Wind load on irregular plan shaped tall building - a case study

Souvik Chakraborty et al.

WIND AND STRUCTURES (2014)

Add to Collection

Article Computer Science, Artificial Intelligence

Accurate subpixel edge location based on partial area effect

Agustin Trujillo-Pino et al.

IMAGE AND VISION COMPUTING (2013)

Add to Collection

Article Acoustics

Fundamental mode shape and its derivatives in structural damage localization

Koushik Roy et al.

JOURNAL OF SOUND AND VIBRATION (2013)

Add to Collection

Article Construction & Building Technology

TinyOS-based real-time wireless data acquisition framework for structural health monitoring and control

Lauren E. Linderman et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2013)

Add to Collection

Article Engineering, Multidisciplinary

Compressive sampling-based data loss recovery for wireless sensor networks used in civil structural health monitoring

Yuequan Bao et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2013)

Add to Collection

Article Engineering, Multidisciplinary

Compressed sensing techniques for detecting damage in structures

David Mascarenas et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Strain Paint: Noncontact Strain Measurement Using Single-Walled Carbon Nanotube Composite Coatings

Paul A. Withey et al.

NANO LETTERS (2012)

Add to Collection

Article Materials Science, Characterization & Testing

Carbon Nanotube Sensing Skins for Spatial Strain and Impact Damage Identification

Kenneth J. Loh et al.

JOURNAL OF NONDESTRUCTIVE EVALUATION (2009)

Add to Collection

Review Engineering, Multidisciplinary

Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review

Bing Pan et al.

MEASUREMENT SCIENCE AND TECHNOLOGY (2009)

Add to Collection

Article Geochemistry & Geophysics

Non-parametric seismic data recovery with curvelet frames

Felix J. Herrmann et al.

GEOPHYSICAL JOURNAL INTERNATIONAL (2008)

Add to Collection

Article Engineering, Electrical & Electronic

An introduction to compressive sampling

Emmanuel J. Candes et al.

IEEE SIGNAL PROCESSING MAGAZINE (2008)

Add to Collection

Article Engineering, Electrical & Electronic

An Interior-Point Method for Large-Scale l1-Regularized Least Squares

Seung-Jean Kim et al.

IEEE JOURNAL OF SELECTED TOPICS IN SIGNAL PROCESSING (2007)

Add to Collection

Article Acoustics

An asymptotic solution to transverse free vibrations of variable-section beams

R. D. Firouz-Abadi et al.

JOURNAL OF SOUND AND VIBRATION (2007)

Add to Collection

Article Engineering, Electrical & Electronic

Compressive sensing

Richard G. Baraniuk

IEEE SIGNAL PROCESSING MAGAZINE (2007)

Add to Collection

Article Mechanics

Vibration of a variable cross-section beam

Mehmet Cem Ece et al.

MECHANICS RESEARCH COMMUNICATIONS (2007)

Add to Collection

Article Computer Science, Information Systems

Compressed sensing

DL Donoho

IEEE TRANSACTIONS ON INFORMATION THEORY (2006)

Add to Collection

Article Nanoscience & Nanotechnology

Nanotube film based on single-wall carbon nanotubes for strain sensing

P Dharap et al.

NANOTECHNOLOGY (2004)

Add to Collection

Article Acoustics

Optimal sensor placement methodology for parametric identification of structural systems

C Papadimitriou

JOURNAL OF SOUND AND VIBRATION (2004)

Add to Collection

Article Acoustics

A state feedback electro-acoustic transducer for active control of acoustic impedance

T Samejima

JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2003)

Add to Collection

Article Mathematics, Applied

Damage detection using finite element and laser operational deflection shapes

K Waldron et al.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2002)

Add to Collection

Article Mechanics

Damage detection of beams using operational deflection shapes

PF Pai et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2001)

Add to Collection

Article Acoustics

Entropy-based optimal sensor location for structural model updating

C Papadimitriou et al.

JOURNAL OF VIBRATION AND CONTROL (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.