☆ 4.6 Review

Embedded Sensors for Structural Health Monitoring: Methodologies and Applications Review

SENSORS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Manufacturing

Metal structures embedded with piezoelectric PVDF sensors using ultrasonic additive manufacturing

Arun K. Ramanathan et al.

Summary: This paper presents a method for embedding piezoelectric sensors into aluminum using a low-temperature metal joining process. By optimizing the pre-compression, the mechanical coupling between the metal and the sensor is achieved without the use of adhesives. This technology has the potential to enable rapid fabrication of functionalized metal structures.

MANUFACTURING LETTERS (2022)

Add to Collection

Article Materials Science, Characterization & Testing

Double active transient thermography

Miguel A. Machado et al.

Summary: This paper presents a new variant of Active Transient Thermography, called Double Active Transient Thermography, which aims to improve temperature contrast for polymer matrix composites parts produced by Additive Manufacturing. The introduction of a cold flow can increase temperature contrast up to 100%, with mid thickness defects benefitting the most from this technique. The improvement of the inspection procedure is achieved by enhancing the thermal contrast of defects and predicting when maximum contrasts occur.

NDT & E INTERNATIONAL (2022)

Add to Collection

Review Chemistry, Analytical

Structural Health Monitoring in Composite Structures: A Comprehensive Review

Sahar Hassani et al.

Summary: This study provides a comprehensive review of the history and development of damage-detection methods in composite structures. It emphasizes the importance of early damage detection to prevent catastrophic events and discusses various testing techniques and vibration-based methods. The study also highlights the use of advanced signal processing, machine learning, and deep learning in solving damage-detection problems. Additionally, it focuses on the application of smart composites and concludes with suggestions for future work.

SENSORS (2022)

Add to Collection

Review Engineering, Multidisciplinary

Recent progress in aircraft smart skin for structural health monitoring

Yu Wang et al.

Summary: Aircraft smart skin technology integrates advanced sensors, actuators, and micro-processors to enhance aircraft structural performance and enable self-repair and self-adaptation capabilities. The focus is on smart skin for structural health monitoring, with challenges including large-scale, lightweight design, and low power consumption.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2022)

Add to Collection

Article Automation & Control Systems

New directions for inline inspection of automobile laser welds using non-destructive testing

Miguel Araujo Machado et al.

Summary: An innovative system for detecting surface and sub-surface welding defects in laser-brazed joints is presented, operating autonomously and integrated with a robotized arm. Customized eddy current probes were designed and experimentally validated for detecting pore defects with 0.13 mm diameter and sub-surface defects buried 1 mm deep. The integration of the system with the manufacturing process towards an Industry 4.0 quality control paradigm is also discussed.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Engineering, Multidisciplinary

Ultrasound tomography for health monitoring of carbon fibre-reinforced polymers using implanted nanocomposite sensor networks and enhanced reconstruction algorithm for the probabilistic inspection of damage imaging

Jianwei Yang et al.

Summary: This study integrates nanocomposite technology into the development of a piezoresistive sensor network, achieving accurate imaging and continuous monitoring of CFRP laminates using an enhanced UT method with a revised reconstruction algorithm.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2022)

Add to Collection

Article Engineering, Multidisciplinary

Brillouin scattering spectrum-based crack measurement using distributed fiber optic sensing

Ruonan Ou et al.

Summary: A new crack analysis method based on Brillouin scattering spectrum (BSS) data is proposed to overcome the spatial resolution limitation in conventional strain measurement, successfully locating cracks and measuring sub-millimeter cracks in wood board and concrete overlay experiments. The method demonstrates accuracy in crack strain quantification and capability to locate cracks less than 0.1 mm wide using a Brillouin-DFOS system with 750 mm spatial resolution.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2022)

Add to Collection

Article Chemistry, Analytical

Structural Damage Detection through EMI and Wave Propagation Techniques Using Embedded PZT Smart Sensing Units

Himanshi Gayakwad et al.

Summary: Lead Zirconate Titanate (PZT) sensors are popular in structural health monitoring using the electromechanical impedance (EMI) technique for damage identification. The concept of smart sensing units (SSU) composed of a PZT patch, an adhesive layer, and a steel plate embedded in concrete structures is introduced. The SSUs have high sensitivity to detect structural changes and obtain high electrical conductance signatures from the EMI technique. The wave propagation technique is proposed to implement the SSUs for damage detection in the host structure.

SENSORS (2022)

Add to Collection

Article Materials Science, Characterization & Testing

Shaping Eddy Currents for Non-Destructive Testing Using Additive Manufactured Magnetic Substrates

Miguel A. Machado et al.

Summary: This paper presents a new approach to the design of eddy current testing probes, using high magnetic permeability pattern substrates to shape the distribution of eddy currents. This approach shifts the complexity of coil production to the magnetic substrate, which can be easily manufactured using additive manufacturing technologies.

JOURNAL OF NONDESTRUCTIVE EVALUATION (2022)

Add to Collection

Article Materials Science, Multidisciplinary

On the design of a piezoelectric self-sensing smart composite laminate

Maria Elena Gino et al.

Summary: This study proposes a non-invasive method for piezoelectric functionalization of composite laminates using lead zirconate titanate micrometric powder, and evaluates the electromechanical properties with different powder volume fractions. The lead zirconate titanate powder laminates show higher electrical sensitivity and comparable shock resistance to the pristine laminates. Additionally, an analytical model is proposed to predict the electromechanical behavior of piezoelectric composites.

MATERIALS & DESIGN (2022)

Add to Collection

Article Chemistry, Analytical

Stress Monitoring of Concrete via Uniaxial Piezoelectric Sensor

Chen Wu et al.

Summary: A uniaxial piezoelectric sensor was developed to overcome the problem of reflecting the output charge of the piezoelectric element as a combination of vectors in the three stress directions. The sensor was embedded in concrete to monitor stress, and a new stress monitoring method based on this sensor was proposed. The experimental results showed that the sensor had high fitting linearity, stable performance, and was not affected by loading rate and load pattern.

SENSORS (2022)

Add to Collection

Article Chemistry, Analytical

VibroTouch: Active Tactile Sensor for Contact Detection and Force Sensing via Vibrations

Danissa Sandykbayeva et al.

Summary: This research aims to detect the light touch contact between a robot manipulator and objects using vibration sensors. By analyzing the Fourier spectra of low-frequency vibrations and accelerometer data, researchers attempt to identify the changes in vibration propagation patterns under different gripping properties. Additionally, through the collection and analysis of vibration feedback data, the research aims to lay the groundwork for pattern extraction and recognition based on the physical properties of an object.

SENSORS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Advances in constructing silver nanowire-based conductive pathways for flexible and stretchable electronics

Yuanhang Yang et al.

Summary: Flexible and stretchable electronics have gained attention for various applications, but conventional electrodes are not suitable. Therefore, it is crucial to develop new materials and processes for superior electrodes. This review focuses on silver nanowire and discusses different processing technologies and strategies for enhancing the conductive pathway.

NANOSCALE (2022)

Add to Collection

Article Engineering, Manufacturing

Embedding eddy current sensors into LPBF components for structural health monitoring

Philipp Stoll et al.

Summary: This study assesses the feasibility of embedding eddy current (EC) sensors for non-destructive testing (NDT) into SLM components for structural health monitoring (SHM). A reliable embedding process for EC sensors is developed, showcasing the effectiveness of the sensors in LPBF process. Experimental results demonstrate that the embedded EC sensors can be used to observe and detect controlled crack growth, providing direct information about damage severity and evolution.

PROGRESS IN ADDITIVE MANUFACTURING (2021)

Add to Collection

Article Construction & Building Technology

A novel approach for non-destructive EMI-based corrosion monitoring of concrete-embedded reinforcements using multi-orientation piezoelectric sensors

Jamal Ahmadi et al.

Summary: This paper proposes a new method with high accuracy for evaluating corrosion condition using EMI method and PZT sensors in concrete structures. Experimental results show that PZT sensors are sensitive to compressive force, and comparison between specimen behavior and EMI measurements can be used for corrosion detection. Based on the findings, a solution for detecting corrosion rate, direction, and initiation period is proposed.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Engineering, Multidisciplinary

High-speed inspection of delamination defects in unidirectional CFRP by non-contact eddy current testing

Miguel A. Machado et al.

Summary: The anisotropic bulk conductivity of carbon fibre reinforced polymers poses a challenge for eddy current testing (ECT), making it difficult to detect damage in the transverse direction. A customized eddy current probe was developed based on numerical simulation to detect delamination damage in carbon fibre reinforced polymer composite. The probe configuration, with two in-line coils operating at 1 MHz frequency, was found to effectively detect real delamination damage in a high-quality CFRP component.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Instruments & Instrumentation

FBG Arrays for Quasi-Distributed Sensing: A Review

Chengli Li et al.

Summary: FBG array is a powerful technique for temperature, strain, and vibration monitoring with fast response and high precision. Fabrication methods include femtosecond laser system and online writing technique, while demodulation techniques involve wavelength shift and low noise phase demodulation.

PHOTONIC SENSORS (2021)

Add to Collection

Article Engineering, Marine

Application of embedded fibre Bragg grating sensors for structural health monitoring of complex composite structures for marine applications

Magdalena Mieloszyk et al.

Summary: This study presents an application of embedded FBG sensors arrays for evaluation of a complex composite structure - a fast patrol boat. The experimental investigations include spectra analyses for thin laminate sample, a composite sandwich panel, and the boat hull. The quality of sensors spectra and the relationship between strain and temperature were determined, with a linear relationship achieved for both elements. The utility of designed FBG sensors array was verified by sensors responses on impact excitation in chosen points on the structure.

MARINE STRUCTURES (2021)

Add to Collection

Article Engineering, Multidisciplinary

Continuous wave terahertz imaging for NDT: Fundamentals and experimental validation

Frederico B. Costa et al.

Summary: This study investigates the fundamental phenomena of continuous wave terahertz imaging and develops a mathematical model for describing Fabry-Perot interference, enabling the measurement of thicknesses and surface curvatures. The system was able to detect various defects and interactions between materials were studied using numerical methods. Comparisons with other Non-Destructive Testing methods revealed the particular interest of CW THz imaging for water infiltrations and composite materials.

MEASUREMENT (2021)

Add to Collection

Article Materials Science, Characterization & Testing

Mechanical Sensing Properties of Embedded Smart Piezoelectric Sensor for Structural Health Monitoring of Concrete

Fei Sha et al.

Summary: The study focuses on the fabrication and testing of an embedded smart piezoelectric sensor in concrete, presenting methods for structural health monitoring based on dynamic stress-sensing capabilities. The research investigated mechanical performance of encapsulation materials, effects of loading frequencies on output voltages, and stress sensitivities, demonstrating the sensors' potential for dynamic mechanical monitoring in concrete structures and civil engineering applications.

RESEARCH IN NONDESTRUCTIVE EVALUATION (2021)

Add to Collection

Article Chemistry, Analytical

Acoustic Emission Monitoring of Carbon Fibre Reinforced Composites with Embedded Sensors for In-Situ Damage Identification

Arnaud Huijer et al.

Summary: This study evaluates the performance of embedded sensors for acoustic emissions measurement and investigates the specific type of AE induced by embedded sensors. It was found that sensors of different sizes exhibit varying sensitivities in different frequency ranges, and a clustering approach was used to identify unique AE related to the region of the embedded sensor under combined stress.

SENSORS (2021)

Add to Collection

Article Chemistry, Analytical

Pultruded FRP Beams with Embedded Fibre Bragg Grating Optical Sensors for Strain Measurement and Failure Detection

Daniel Maldonado-Hurtado et al.

Summary: In this study, the integration of FBG sensors for observation and analysis of composite beams' integrity over time is proposed. Validation tests showed successful embedding of FBG-based optical sensors in an FRP pultrusion beam, enabling strain transmission and anticipation of piece failure through FBG spectrum deformation.

SENSORS (2021)

Add to Collection

Article Chemistry, Analytical

Multisensor Inspection of Laser-Brazed Joints in the Automotive Industry

Miguel A. Machado et al.

Summary: The article discusses a multisensory customized inspection system for automobile laser brazing using potential drop method and eddy current testing. Numerical simulations show superior performance of a new four-point probe configuration. The dedicated inspection system effectively detects porosities, cracks, and lack of bonding defects.

SENSORS (2021)

Add to Collection

Review Chemistry, Analytical

Fiber Optic Sensing Technologies for Battery Management Systems and Energy Storage Applications

Yang D. Su et al.

Summary: The use of fiber optic sensors in battery monitoring is increasing due to the demand for enhanced battery management systems with accurate state estimations. This review explores the advancements in practical implementation of internal and external parameter measurements in batteries, as well as the challenges and future prospects of integrating fiber optics into high-value battery applications.

SENSORS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Sputter Deposited Metal Layers Embedded in Composites-From Fundamentals to Applications

Florian Cougnon et al.

Summary: Magnetron sputter deposition allows for thin film deposition on heat sensitive materials like fiber-reinforced polymers, with temperature increase kept below 25 degrees C for film thicknesses up to 600 nm. Thicker metal films embedded in composites can negatively affect mechanical integrity, and introducing uncured composites into the vacuum chamber can impact base pressure and film properties. Despite these challenges, the potential to use embedded thin films in various applications is demonstrated.

COATINGS (2021)

Add to Collection

Review Mechanics

Smart Composite Structures with Embedded Sensors for Load and Damage Monitoring - A Review

R. Janeliukstis et al.

Summary: Fibre-reinforced polymer (FRP) composite materials are widely used in industries such as aerospace for their lightweight, high strength, and stiffness, but are prone to impact damage. Smart structures with internally embedded sensors offer advantages such as sensor protection, better coupling to the structure, and real-time monitoring without disrupting surface geometry. The review also highlights the limitations associated with sensor embedment, showing the potential for more reliable, cost-effective, and efficient maintenance of transportation and infrastructure.

MECHANICS OF COMPOSITE MATERIALS (2021)

Add to Collection

Article Engineering, Manufacturing

Benchmarking of Nondestructive Testing for Additive Manufacturing

Valdemar R. Duarte et al.

Summary: In this study, various nondestructive testing techniques were used to evaluate defects in complex-shaped parts manufactured through selective laser melting. It was found that no single technique can detect every type of defect, but using multiple techniques provides complementary and redundant information to critically evaluate the integrity of the parts. This approach is crucial for enhancing the reliability of defect detection in additive manufacturing and expanding its potential for critical structural applications.

3D PRINTING AND ADDITIVE MANUFACTURING (2021)

Add to Collection

Review Engineering, Civil

Sensors for process and structural health monitoring of aerospace composites: A review

Helena Rocha et al.

Summary: Structural Health Monitoring (SHM) is a promising method to overcome the unpredictable failure behavior of composite materials, enhancing their confidence in aerospace industry. This review paper focuses on the most promising sensors for SHM of aerospace composites, discussing their principles, characteristics, and applications in detail. The development of SHM systems for aerospace environment requires consideration of various factors and multidisciplinary teams for adequate development.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Chemistry, Analytical

A Multichannel Strain Measurement Technique for Nanomodified Smart Cement-Based Sensors in Reinforced Concrete Structures

Andrea Meoni et al.

Summary: This paper proposes a multichannel measurement technique for retrieving strains from smart cement-based sensors and validates its effectiveness. Experimental results demonstrate that the proposed technique is effective for retrieving time-stable strain measurements from smart cement-based sensors and aiding in identifying changes in their electrical outputs due to environmental effects.

SENSORS (2021)

Add to Collection

Review Chemistry, Analytical

Fiber Optic Sensors Embedded in Textile-Reinforced Concrete for Smart Structural Health Monitoring: A Review

Lourdes S. M. Alwis et al.

Summary: In the past decade, rapid developments in carbon fiber technology, additive manufacturing technology, sensor engineering, and new structural reinforcement techniques have collectively paved way for concrete structures with non-corrosive reinforcement and in-built sensors. The incorporation of fiber optic sensors has allowed for more effective monitoring and reinforcement of structures, leading to innovative possibilities for infrastructure monitoring and structural reinforcement.

SENSORS (2021)

Add to Collection

Article Chemistry, Analytical

Real-Time Life-Cycle Monitoring of Composite Structures Using Piezoelectric-Fiber Hybrid Sensor Network

Yinghong Yu et al.

Summary: An in situ piezoelectric-fiber hybrid sensor network was developed to monitor the life-cycle of CFRPs, demonstrating excellent damage identification capability and proposing a new damage imaging algorithm for improved position precision.

SENSORS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Piezoelectric sensor-based damage progression in concrete through serial/parallel multi-sensing technique

K. Balamonica et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Integrated Sensors in Advanced Composites: A Critical Review

Hossein Montazerian et al.

CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2020)

Add to Collection

Review Engineering, Electrical & Electronic

A review of railway infrastructure monitoring using fiber optic sensors

Cong Du et al.

SENSORS AND ACTUATORS A-PHYSICAL (2020)

Add to Collection

Article Chemistry, Analytical

Smart Build-Plate for Metal Additive Manufacturing Processes

Adam Hehr et al.

SENSORS (2020)

Add to Collection

Article Acoustics

A nonlinear ultrasonic SHM method for impact damage localisation in composite panels using a sparse array of piezoelectric PZT transducers

Christos Andreades et al.

ULTRASONICS (2020)

Add to Collection

Review Construction & Building Technology

Structural health monitoring of timber structures - Review of available methods and case studies

Pedro Palma et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Application of electromechanical impedance technique in the monitoring of sigma phase embrittlement in duplex stainless steel

David D. S. Silva et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Review Materials Science, Composites

Structural Health Monitoring for Advanced Composite Structures: A Review

Alfredo Guemes et al.

JOURNAL OF COMPOSITES SCIENCE (2020)

Add to Collection

Article Computer Science, Information Systems

3D Printed Elastomeric Lattices With Embedded Deformation Sensing

Carolyn Carradero Santiago et al.

IEEE ACCESS (2020)

Add to Collection

Article Materials Science, Characterization & Testing

Evaluation of Different Non-destructive Testing Methods to Detect Imperfections in Unidirectional Carbon Fiber Composite Ropes

Kim-Niklas Antin et al.

JOURNAL OF NONDESTRUCTIVE EVALUATION (2019)

Add to Collection

Article Chemistry, Analytical

Embedded Smart Antenna for Non-Destructive Testing and Evaluation (NDT&E) of Moisture Content and Deterioration in Concrete

Kah Hou Teng et al.

SENSORS (2019)

Add to Collection

Review Chemistry, Analytical

Piezoelectric Transducer-Based Structural Health Monitoring for Aircraft Applications

Xinlin Qing et al.

SENSORS (2019)

Add to Collection

Review Chemistry, Analytical

Review of Fiber Optic Sensors for Structural Fire Engineering

Yi Bao et al.

SENSORS (2019)

Add to Collection

Article Materials Science, Composites

In-situ characterization of 3D printed continuous fiber reinforced composites: A methodological study using fiber Bragg grating sensors

Charoula Kousiatza et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Construction & Building Technology

Sensor fault management techniques for wireless smart sensor networks in structural health monitoring

Yuguang Fu et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2019)

Add to Collection

Article Engineering, Multidisciplinary

Contactless high-speed eddy current inspection of unidirectional carbon fiber reinforced polymer

Miguel A. Machado et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Durability of Functionalized Carbon Structures with Optical Fiber Sensors in a Highly Alkaline Concrete Environment

Kort Bremer et al.

APPLIED SCIENCES-BASEL (2019)

Add to Collection

Article Mechanics

Using passive and active acoustic methods for impact damage assessment of composite structures

Milad Saeedifar et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Chemistry, Analytical

Detection of Crack Initiation and Growth Using Fiber Bragg Grating Sensors Embedded into Metal Structures through Ultrasonic Additive Manufacturing

Sean K. Chilelli et al.

SENSORS (2019)

Add to Collection

Article Chemistry, Physical

Vibration Viscosity Sensor for Engine Oil Monitoring Using Metal Matrix Piezoelectric Composite

Tetsuro Yanaseko et al.

MATERIALS (2019)

Add to Collection

Review Construction & Building Technology

A literature review of next-generation smart sensing technology in structural health monitoring

Sandeep Sony et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2019)

Add to Collection

Article Engineering, Multidisciplinary

Strain and crack analysis within concrete members using distributed fibre optic sensors

Rafal Sienko et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2019)

Add to Collection

Article Engineering, Multidisciplinary

Characterization of process-induced defects in automated fiber placement manufacturing of composites using fiber Bragg grating sensors

Ebrahim Oromiehie et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Acoustic Power Transfer and Communication With a Wireless Sensor Embedded Within Metal

Victor Farm-Guoo Tseng et al.

IEEE SENSORS JOURNAL (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Laser Cladding-Based Metallic Embedding Technique for Fiber Optic Sensors

Tania Grandal et al.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2018)

Add to Collection

Article Engineering, Multidisciplinary

Recent developments in fibre optic shape sensing

Moe Amanzadeh et al.

MEASUREMENT (2018)

Add to Collection

Article Chemistry, Analytical

Structural Health Monitoring in Composite Structures by Fiber-Optic Sensors

Alfredo Guemes et al.

SENSORS (2018)

Add to Collection

Review Chemistry, Analytical

A Review of the Piezoelectric Electromechanical Impedance Based Structural Health Monitoring Technique for Engineering Structures

Wongi S. Na et al.

SENSORS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Fabrication and Characterization of a Magnetized Metal-Encapsulated FBG Sensor for Structural Health Monitoring

Sagar Jinachandran et al.

IEEE SENSORS JOURNAL (2018)

Add to Collection

Review Chemistry, Analytical

Fibre Bragg Grating Based Strain Sensors: Review of Technology and Applications

Carlo Edoardo Campanella et al.

SENSORS (2018)

Add to Collection

Article Chemistry, Analytical

Article Ultrasonic Sensing and Actuation in Laminate Structures Using Bondline-Embedded d35 Piezoelectric Sensors

Hussain Altammar et al.

SENSORS (2018)

Add to Collection

Proceedings Paper Medicine, Research & Experimental

Passive and active monitoring for defect detection and quantification in composites

Neha Chandarana et al.

HEALTH MONITORING OF STRUCTURAL AND BIOLOGICAL SYSTEMS XII (2018)

Add to Collection

Article Chemistry, Analytical

Structural Health Monitoring Using Textile Reinforcement Structures with Integrated Optical Fiber Sensors

Kort Bremer et al.

SENSORS (2017)

Add to Collection

Article Acoustics

Applications of a nanocomposite-inspired in-situ broadband ultrasonic sensor to acousto-ultrasonics-based passive and active structural health monitoring

Menglong Liu et al.

ULTRASONICS (2017)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Continuous and embedde dsolutions for SHM of concrete structures using changing electrical potential in self-sensing cement-based composites

Austin Downey et al.

NONDESTRUCTIVE CHARACTERIZATION AND MONITORING OF ADVANCED MATERIALS, AEROSPACE, AND CIVIL INFRASTRUCTURE 2017 (2017)

Add to Collection

Article Materials Science, Ceramics

A comparative study of hard/soft PZT-based ceramic composites

N. Horchidan et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Article Construction & Building Technology

Experimental damage evaluation of reinforced concrete steel bars using piezoelectric sensors

Chris G. Karayannis et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Additive manufacturing of metallic components by selective electron beam melting - a review

C. Koerner

INTERNATIONAL MATERIALS REVIEWS (2016)

Add to Collection

Article Engineering, Multidisciplinary

Damage and strain identification in multifunctional materials via electrical impedance tomography with constrained sine wave solutions

Tyler N. Tallman et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2016)

Add to Collection

Review Chemistry, Analytical

Fibre Optic Sensors for Structural Health Monitoring of Aircraft Composite Structures: Recent Advances and Applications

Raffaella Di Sante

SENSORS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Reinforcement corrosion assessment capability of surface bonded and embedded piezo sensors for reinforced concrete structures

Visalakshi Talakokula et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2015)

Add to Collection

Article Chemistry, Physical

Health monitoring of structural composites with embedded carbon nanotube coated glass fiber sensors

J. Sebastian et al.

CARBON (2014)

Add to Collection

Review Chemistry, Analytical

Fiber Bragg Grating Sensors toward Structural Health Monitoring in Composite Materials: Challenges and Solutions

Damien Kinet et al.

SENSORS (2014)

Add to Collection

Article Chemistry, Analytical

An Experimental Study on the Effect of Temperature on Piezoelectric Sensors for Impedance-Based Structural Health Monitoring

Fabricio G. Baptista et al.

SENSORS (2014)

Add to Collection

Article Materials Science, Composites

Damage identification in carbon fiber reinforced polymer plates using electrical resistance tomography mapping

Athanasios Baltopoulos et al.

JOURNAL OF COMPOSITE MATERIALS (2013)

Add to Collection

Proceedings Paper Chemistry, Physical

Ultrasonic additive manufacturing - A hybrid production process for novel functional products

R. J. Friel et al.

PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM) (2013)

Add to Collection

Article Instruments & Instrumentation

The effects of embedded piezoelectric fiber composite sensors on the structural integrity of glass-fiber-epoxy composite laminate

Hari P. Konka et al.

SMART MATERIALS AND STRUCTURES (2012)

Add to Collection

Article Instruments & Instrumentation

Multifunctional SMArt composite material for in situ NDT/SHM and de-icing

Fulvio Pinto et al.

SMART MATERIALS AND STRUCTURES (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of embedded sensors on interlaminar damage in composite structures

Shaoluo Butler et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Composite Structural Health Monitoring Through Use of Embedded PZT Sensors

Hong-Yue 'Ray' Tang et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2011)

Add to Collection

Article Engineering, Electrical & Electronic

Fiber Optic Sensors in Structural Health Monitoring

Jose Miguel Lopez-Higuera et al.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2011)

Add to Collection

Article Engineering, Manufacturing

Metal Embedded Optical Fiber Sensors: Laser-Based Layered Manufacturing Procedures

Hamidreza Alemohammad et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2011)

Add to Collection

Article Instruments & Instrumentation

Embedded wireless strain sensors based on printed RFID tag

Sari Merilampi et al.

SENSOR REVIEW (2011)

Add to Collection

Review Chemistry, Analytical

Strain Measurements of Composite Laminates with Embedded Fibre Bragg Gratings: Criticism and Opportunities for Research

Geert Luyckx et al.

SENSORS (2011)

Add to Collection

Proceedings Paper Engineering, Mechanical

Embedded fiber optic sensors for monitoring processing, quality and structural health of resin transfer molded components

C. Keulen et al.

9TH INTERNATIONAL CONFERENCE ON DAMAGE ASSESSMENT OF STRUCTURES (DAMAS 2011) (2011)

Add to Collection

Article Engineering, Civil

Vibration-based monitoring of civil infrastructure: challenges and successes

James M. W. Brownjohn et al.

JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2011)

Add to Collection

Article Construction & Building Technology

Electrical Resistance Tomography imaging of concrete

Kimmo Karhunen et al.

CEMENT AND CONCRETE RESEARCH (2010)

Add to Collection

Article Engineering, Multidisciplinary

Structural Damage Detection Based on a Fiber Bragg Grating Sensing Array and a Back Propagation Neural Network: An Experimental Study

Pei Luo et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2010)

Add to Collection

Article Engineering, Multidisciplinary

Structural Health Monitoring in mainland China: Review and Future Trends

Jinping Ou et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2010)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Health monitoring of composite structures by embedded FBG and interferometric Fabry-Perot sensors

R. de Oliveira et al.

COMPUTERS & STRUCTURES (2008)

Add to Collection

Article Engineering, Electrical & Electronic

A Wireless, Passive Embedded Sensor for Real-Time Monitoring of Water Content in Civil Engineering Materials

Justin B. Ong et al.

IEEE SENSORS JOURNAL (2008)

Add to Collection

Article Engineering, Manufacturing

Design, fabrication, and characterization of metal embedded microphotonic sensors

Xugang Zhang et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2008)

Add to Collection

Article Engineering, Mechanical

Vibration-based structural health monitoring using output-only measurements under changing environment

A. Deraemaeker et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2008)

Add to Collection

Article Engineering, Electrical & Electronic

Passive wireless sensing using SWNT-based multifunctional thin film patches

Kenneth J. Loh et al.

INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS (2008)

Add to Collection

Article Acoustics

A potential link from damage diagnostics to health prognostics of composites through built-in sensors

Fu-Kuo Chang et al.

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2007)

Add to Collection

Article Engineering, Manufacturing

Study on embedding and integration of microsensors into metal structures for manufacturing applications

Xudong Cheng et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2007)

Add to Collection

Review Multidisciplinary Sciences

Structural health monitoring of civil infrastructure

J. M. W. Brownjohn

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2007)

Add to Collection

Article Instruments & Instrumentation

Performance assessment and validation of piezoelectric active-sensors in structural health monitoring

Gyuhae Park et al.

SMART MATERIALS AND STRUCTURES (2006)

Add to Collection

Article Engineering, Multidisciplinary

Performance of vibration-based techniques for the identification of structural damage

Jag Humar et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2006)

Add to Collection

Article Engineering, Multidisciplinary

Debond detection using embedded piezoelectric elements in reinforced concrete structures - Part I: Experiment

F Wu et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2006)

Add to Collection

Article Materials Science, Composites

Cement-based piezoelectric ceramic smart composites

BQ Dong et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2005)

Add to Collection

Article Acoustics

Simulation of asymmetric Lamb waves for sensing and actuation in plates

A Ghoshal et al.

SHOCK AND VIBRATION (2005)

Add to Collection

Review Engineering, Civil

Recent applications of fiber optic sensors to health monitoring in civil engineering

HN Li et al.

ENGINEERING STRUCTURES (2004)

Add to Collection

Article Engineering, Electrical & Electronic

Analytical and experimental study on noncontact sensing with embedded fiber-optic sensors in rotating metal parts

XC Li et al.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2004)

Add to Collection

Article Materials Science, Composites

Development of embedded sensor models in composite laminates for structural health monitoring

HS Kim et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2004)

Add to Collection

Article Instruments & Instrumentation

Fully reversed electromechanical fatigue behavior of composite laminate with embedded piezoelectric actuator/sensor

M Yocum et al.

SMART MATERIALS AND STRUCTURES (2003)

Add to Collection

Article Engineering, Manufacturing

Metal embedded Fiber Bragg Grating sensors in layered manufacturing

XC Li et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2003)

Add to Collection

Article Instruments & Instrumentation

Health monitoring of civil infrastructures

KP Chong et al.

SMART MATERIALS & STRUCTURES (2003)

Add to Collection

Article Engineering, Electrical & Electronic

Structural health monitoring of smart composite materials by using EFPI and FBG sensors

J Leng et al.

SENSORS AND ACTUATORS A-PHYSICAL (2003)

Add to Collection

Review Engineering, Aerospace

Review of state of art of smart structures and integrated systems

I Chopra

AIAA JOURNAL (2002)

Add to Collection

Article Mechanics

Online detection of crack damage in composite plates using embedded piezoelectric actuators/sensors and wavelet analysis

YJ Yan et al.

COMPOSITE STRUCTURES (2002)

Add to Collection

Article Engineering, Multidisciplinary

Piezoelectric Wafer Embedded Active Sensors for Aging Aircraft Structural Health Monitoring

Victor Giurgiutiu et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2002)

Add to Collection

Article Instruments & Instrumentation

Thermal behavior of a metal embedded fiber Bragg grating sensor

XC Li et al.

SMART MATERIALS & STRUCTURES (2001)

Add to Collection

Article Materials Science, Composites

Embedded fibre Bragg grating sensors in advanced composite materials

KSC Kuang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2001)

Add to Collection

Article Materials Science, Multidisciplinary

Magnetron sputtering: a review of recent developments and applications

PJ Kelly et al.

VACUUM (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.