☆ 4.7 Article

A degradation-shock dependent competing failure processes based method for remaining useful life prediction of drill bit considering time-shifting sudden failure threshold

RELIABILITY ENGINEERING & SYSTEM SAFETY (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

A self-data-driven method for remaining useful life prediction of wind turbines considering continuously varying speeds

Naipeng Li et al.

Summary: Predictive maintenance is crucial for reducing the operation and maintenance costs of wind turbines, and self-data-driven RUL prediction methods can be applied in industrial cases without sufficient failure event data. A method has been proposed for RUL prediction of WTs considering continuously varying speeds, showing effectiveness through simulation and industrial case studies.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Industrial

A gamma process based model for systems subject to multiple dependent competing failure processes under Markovian environments

Bei Wu et al.

Summary: The article proposes a reliability model for systems subject to multiple dependent competing failure processes affected by Markovian environments, with a maintenance model developed for distinct gamma processes controlling the natural wear behavior of the system in different environments. Analytically derived explicit formulas for system reliability indexes and a simulation algorithm are used to verify the correctness of the models and results. The applicability of the proposed models and the validity of obtained results are illustrated through a study case of a micro-engine system.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

Add to Collection

Article Automation & Control Systems

A novel based-performance degradation indicator RUL prediction model and its application in rolling bearing

Chuangyan Yang et al.

Summary: This study proposes a novel RUL prediction model based on performance degradation indicators to address the poor prediction performance of rolling bearing remaining useful life (RUL) with a single degradation indicator. The vibration signal of the rolling bearing is decomposed, and the degradation feature set of the reconstructed signals is extracted. The sensitive degradation indicator is calculated by fusing improved independent component analysis and Mahalanobis Distance, and the error fluctuations are repaired using a gray regression model. Finally, a neural network model based on the health indicator is constructed to predict the RUL of the rolling bearing.

ISA TRANSACTIONS (2022)

Add to Collection

Article Automation & Control Systems

Tool wear monitoring for cavity milling based on vibration singularity analysis and stacked LSTM

Kaile Ma et al.

Summary: This article introduces a tool wear monitoring system that combines stacked network and feature extraction methods to improve the accuracy of tool wear prediction through vibration singularity analysis and correlation analysis.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Automation & Control Systems

A new time-space attention mechanism driven multi-feature fusion method for tool wear monitoring

Tingting Feng et al.

Summary: This paper proposes a new method for tool wear monitoring and residual useful life (RUL) prediction, which effectively captures the complex relationship between tool wear values and features by introducing a time-space attention mechanism and feature weighting. It achieves more accurate wear monitoring and stable prediction results.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Engineering, Mechanical

An unsupervised feature learning based health indicator construction method for performance assessment of machines

Liang Guo et al.

Summary: This paper proposes a method for constructing health indicators based on unsupervised feature learning, which calculates the health status of machines by building a multiscale convolutional autoencoder network and optimizing hyperparameters through genetic algorithms. Experimental results demonstrate that this method can effectively identify the degradation process of machines and achieve better performance.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Industrial

Towards trustworthy machine fault diagnosis: A probabilistic Bayesian deep learning framework

Taotao Zhou et al.

Summary: This paper proposes a probabilistic Bayesian deep learning framework for fault diagnosis, which achieves trustworthy diagnosis by utilizing an uncertainty aware model. The framework accurately identifies faults and provides insights into uncertainty, avoiding erroneous decision-making, and demonstrates competitive results when considering unseen scenarios.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

Add to Collection

Article Engineering, Industrial

Out-of-distribution detection-assisted trustworthy machinery fault diagnosis approach with uncertainty-aware deep ensembles

Te Han et al.

Summary: This article presents a novel OOD detection-assisted trustworthy machinery fault diagnosis approach, which integrates multiple deep neural networks and utilizes uncertainty analysis to enhance the reliability and safety of intelligent models, showing significant advantages in identifying OOD samples.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

Add to Collection

Article Engineering, Industrial

Event-driven tool condition monitoring methodology considering tool life prediction based on industrial internet

Yahui Wang et al.

Summary: Tool condition monitoring and remaining useful life prediction are crucial for ensuring machining quality and reducing machine downtime. However, current monitoring methods have limitations and require consideration of triggering monitoring and prediction under the right machining tasks. This paper proposes an event-driven tool condition monitoring method, combining multiple event sources and Bayesian methodology for online prediction of tool RUL, demonstrating the feasibility of the approach in a case study.

JOURNAL OF MANUFACTURING SYSTEMS (2021)

Add to Collection

Article Engineering, Industrial

Reliability analysis for a system experiencing dependent degradation processes and random shocks based on a nonlinear Wiener process model

Fuqiang Sun et al.

Summary: This paper presents a more general reliability model that considers competing failure modes in complex systems caused by degradation processes and random shocks. A nonlinear Wiener process model is used to characterize degradation behavior, and the impact of random shocks on degradation processes, as well as the impact of degradation processes on random shocks, is investigated. The time-varying copula method is utilized to characterize dependence among multiple failure processes.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

Add to Collection

Article Computer Science, Hardware & Architecture

Remaining Useful Life Prediction Considering Joint Dependency of Degradation Rate and Variation on Time-Varying Operating Conditions

Han Wang et al.

Summary: This article presents a systematic method for RUL prediction of rotating machinery components, taking into account the joint dependency of degradation rate and variation on time-varying operating conditions. The proposed method utilizes maximum likelihood estimation and least squares estimation methods for parameter estimation, and a Bayesian algorithm for RUL prediction. Simulation studies and real applications demonstrate the effectiveness of the method.

IEEE TRANSACTIONS ON RELIABILITY (2021)

Add to Collection

Article Engineering, Industrial

Remaining Useful Life Prediction and Optimal Maintenance Time Determination for a Single Unit Using Isotonic Regression and Gamma Process Model

Han Wang et al.

Summary: This study presents a dynamic RUL prediction and OMT determination approach using a Gamma process model, which can significantly reduce the impact of random fluctuations on the accuracy of RUL prediction and facilitate real-time condition-based maintenance.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

Add to Collection

Article Engineering, Industrial

Degradation modeling and remaining useful life prediction for dependent competing failure processes

Tao Yan et al.

Summary: This paper investigates the degradation modeling and remaining useful life (RUL) prediction for dependent competing failure processes (DCFPs). By formulating models for both soft and hard failure processes and addressing the offline estimation and online update of parameters, a new approach is proposed to tackle the challenges in RUL prediction.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

Add to Collection

Article Engineering, Electrical & Electronic

A Hybrid Generalization Network for Intelligent Fault Diagnosis of Rotating Machinery Under Unseen Working Conditions

Te Han et al.

Summary: Data-driven methods in machinery fault diagnosis have gained popularity in the past two decades, but face challenges in real-world applications due to discrepancies between training and testing data. To address this, a domain generalization-based hybrid diagnosis network is proposed in this article, which regularizes the discriminant structure of the deep network with intrinsic and extrinsic generalization objectives to improve generalization capability.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2021)

Add to Collection

Article Engineering, Manufacturing

Thrust Force-Based Tool Wear Estimation Using Discrete Wavelet Transformation and Artificial Neural Network in CFRP Drilling

Chengwen Han et al.

Summary: This study presents a method for estimating tool wear in CFRP drilling, using DWT and ANN techniques to accurately extract and estimate features related to tool wear, enabling effective prediction and management of tool wear.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2021)

Add to Collection

Article Chemistry, Physical

Predicting the Tool Wear of a Drilling Process Using Novel Machine Learning XGBoost-SDA

Mahdi S. Alajmi et al.

MATERIALS (2020)

Add to Collection

Article Engineering, Mechanical

An improved Wiener process model with adaptive drift and diffusion for online remaining useful life prediction

Han Wang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Computer Science, Hardware & Architecture

A Hybrid Approach to Cutting Tool Remaining Useful Life Prediction Based on the Wiener Process

Huibin Sun et al.

IEEE TRANSACTIONS ON RELIABILITY (2018)

Add to Collection

Article Computer Science, Artificial Intelligence

Machinery health indicator construction based on convolutional neural networks considering trend burr

Liang Guo et al.

NEUROCOMPUTING (2018)

Add to Collection

Article Engineering, Industrial

Reliability modeling for dependent competing failure processes with mutually dependent degradation process and shock process

Che Haiyang et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2018)

Add to Collection

Article Engineering, Industrial

Modeling dependent competing failure processes with degradation-shock dependence

Mengfei Fan et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2017)

Add to Collection

Article Engineering, Multidisciplinary

Reliability modeling for mutually dependent competing failure processes due to degradation and random shocks

Songhua Hao et al.

APPLIED MATHEMATICAL MODELLING (2017)

Add to Collection

Review Mechanics

Recent advances in drilling hybrid FRP/Ti composite: A state-of-the-art review

Jinyang Xu et al.

COMPOSITE STRUCTURES (2016)

Add to Collection

Article Computer Science, Artificial Intelligence

Prediction of drill flank wear using ensemble of co-evolutionary particle swarm optimization based-selective neural network ensembles

Wen-An Yang et al.

JOURNAL OF INTELLIGENT MANUFACTURING (2016)

Add to Collection

Article Engineering, Multidisciplinary

Particle swarm optimization of a neural network model in a machining process

Saurabh Garg et al.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2014)

Add to Collection

Article Engineering, Electrical & Electronic

Polynomial Smoothing of Time Series With Additive Step Discontinuities

Ivan W. Selesnick et al.

IEEE TRANSACTIONS ON SIGNAL PROCESSING (2012)

Add to Collection

Article Automation & Control Systems

Health-State Estimation and Prognostics in Machining Processes

Fatih Camci et al.

IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2010)

Add to Collection

Article Automation & Control Systems

Prognostics for drilling process with wavelet packet decomposition

Yinhui Ao et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.