Related references
Note: Only part of the references are listed.
Article
Energy & Fuels
Jonathan Govaerts et al.
Summary: This paper provides historical background and trends in PV module technologies, focusing on the growing trend towards 'PV everywhere' and improved aesthetics, dimensional freedom, weight concerns, and specific reliability testing. It elaborates on two technological developments in multi-wire interconnection and advanced encapsulation. The multi-wire interconnection offers improved aesthetics and similar performance to traditional tabbing-stringing processes, while the advanced encapsulation introduces a double-membrane laminator for curved surfaces.
PROGRESS IN PHOTOVOLTAICS
(2023)
Article
Energy & Fuels
Nils Klasen et al.
Summary: The study examined the shading tolerance of two types of solar modules based on shingle interconnection, revealing significant power output advantages under partial shading for the matrix layout and decreased risk of hotspot occurrence.
PROGRESS IN PHOTOVOLTAICS
(2022)
Article
Nanoscience & Nanotechnology
Meric Firat et al.
Summary: This research investigates the distribution of dopants in passivating contacts made of polycrystalline silicon. The study reveals enhanced diffusion and doping near pinholes, providing valuable insights for the optimization of passivating contacts.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Energy & Fuels
Arnaud Morlier et al.
Summary: The study presents a method to achieve PV modules with the appearance of natural stone facades by replacing front glass pane of PV modules with stone veneer sheets or laminating veneers of natural stones onto the front glass pane. Single-cell PV modules and large-area demonstrator PV modules with different stone veneers were fabricated, with efficiency analyzed and measures suggested to reduce efficiency losses caused by stone veneers.
Article
Energy & Fuels
Miha Kikelj et al.
Summary: Spatially resolved imaging methods play an important role in the characterization of solar cells, especially when dealing with laterally varying devices. By coupling SRI characterization with advanced simulation, accurate extraction of underlying electrical phenomena can be achieved.
SOLAR ENERGY MATERIALS AND SOLAR CELLS
(2022)
Article
Energy & Fuels
Caixia Zhang et al.
Summary: This paper introduces a new laser cutting process, thermal laser separation (TLS) cutting technology, and investigates its influence on the mechanical and electrical characteristics of bifacial p-type passivated emitter and rear (PERC) solar cells and modules. The results show that the TLS cutting process can reduce damage and achieve higher power and stronger bending strength.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH
(2022)
Article
Energy & Fuels
Ning Chen et al.
Summary: The cutting losses in interdigitated back contact (IBC) solar cells were investigated and it was found that cutting through the back surface field can help reduce these losses, especially under low light intensity.
IEEE JOURNAL OF PHOTOVOLTAICS
(2022)
Article
Energy & Fuels
Martin A. Green et al.
Summary: This article presents consolidated tables showing the highest independently confirmed efficiencies for solar cells and modules. The guidelines for including results in these tables are outlined, and new entries since January 2022 are reviewed. An appendix describing temporary electrical contacting methods and terminology for large-area solar cells is also included.
PROGRESS IN PHOTOVOLTAICS
(2022)
Article
Energy & Fuels
Davide Polverini et al.
Summary: This study assesses the impact of environmental policies on technological development and innovation, focusing on the sustainable product policies of the EU. Key performance metrics and design features were identified for photovoltaic products, and a policy approach was proposed to address areas of innovation through the legal framework of the Ecodesign Directive.
PROGRESS IN PHOTOVOLTAICS
(2021)
Article
Energy & Fuels
Puzant Baliozian et al.
Summary: This study investigated the application of thermal laser separation (TLS) on silicon solar cells, revealing that the main losses in cell performance are attributed to recombination at the newly created unpassivated edges after complete TLS. The cleave process itself does not significantly impact the performance of the cells for both types investigated.
IEEE JOURNAL OF PHOTOVOLTAICS
(2021)
Article
Energy & Fuels
Anna Munzer et al.
Summary: The study explores different postseparation processes for silicon heterojunction (SHJ) half solar cells, finding that combining Al2O3 deposition and subsequent light soaking can significantly improve efficiency. The light soaking process enhances surface passivation and carrier transport for SHJ half cells, leading to efficiencies comparable to full cells. This two-step process eliminates the need for additional thermal annealing of the Al2O3 layer and demonstrates the possibility of compensating separation losses, showing potential for improved efficiency at the module level.
IEEE JOURNAL OF PHOTOVOLTAICS
(2021)
Article
Materials Science, Multidisciplinary
Franz-Josef Haug et al.
Summary: The study investigates polysilicon recombination junctions in which the n-type bottom layer also functions as a passivating contact to the silicon surface. It is found that modifying the interface with C, O, or a combination of these can suppress undesired dopant diffusion without interfering with the diffusion of H, an essential element for passivating defects on the silicon wafer's surface. This modification allows for implied open-circuit voltages (iV(oc)) of up to 740 mV with contact resistivities less than 40 m omega cm(2).
PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS
(2021)
Article
Energy & Fuels
Bishal Kafle et al.
Summary: This paper discusses cost-driven strategies towards industrial manufacturing of TOPCon-based solar cells, evaluating various process routes and pointing out uneven distribution of capital and operational costs in the production process. The study finds that TOPCon concepts can remain economically competitive against bifacial PERC if a minimum absolute gain in cell efficiency is maintained.
SOLAR ENERGY MATERIALS AND SOLAR CELLS
(2021)
Article
Energy & Fuels
Amelie Mueller et al.
Summary: The study compared the environmental impacts of sc-Si glass-backsheet and glass-glass modules produced in China, Germany, and the EU, showing lower impacts for glass-glass modules and for production in Germany and the EU compared to China. The study emphasizes the significant levers for future reductions of environmental impacts, such as module efficiency, energy requirements, silicon consumption, and carbon intensity of electricity during production. The importance of up-to-date inventories and current modeling of electricity mixes for representative LCA results of PV modules is highlighted.
SOLAR ENERGY MATERIALS AND SOLAR CELLS
(2021)
Article
Energy & Fuels
Benedikt Blaesi et al.
Summary: The study presents a photonic color concept based on the Morpho butterfly, achieving an improved angular independent color effect while maintaining high module efficiencies and compatibility with industrial production processes. The optimized photonic structure and outstanding performance in terms of color stability are demonstrated through data from demonstrator modules. The MorphoColor modules show a power output of over 94% compared to reference modules.
IEEE JOURNAL OF PHOTOVOLTAICS
(2021)
Proceedings Paper
Energy & Fuels
Miha Kikelj et al.
Summary: The study presents a detailed 3D optical model for accurate simulations of laterally varying photovoltaic structures, focusing on interdigitated back contact cells. Four key aspects contributing to the accuracy of optical simulations are highlighted through model validation, and the model's applicability is demonstrated through electroluminescence simulations.
2021 IEEE 48TH PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC)
(2021)
Article
Chemistry, Multidisciplinary
Yuchao Zhang et al.
Summary: To significantly impact climate change, the annual production of photovoltaic (PV) modules must increase dramatically to around 3 terawatts (TW) by 2030. However, existing and future commercial PV cell technologies face sustainable manufacturing capacity limitations due to scarce metals, necessitating significant material consumption reductions for sustainable multi-TW scale manufacturing.
ENERGY & ENVIRONMENTAL SCIENCE
(2021)
Article
Energy & Fuels
Puzant Baliozian et al.
IEEE JOURNAL OF PHOTOVOLTAICS
(2020)
Review
Physics, Applied
Martin Hermle et al.
APPLIED PHYSICS REVIEWS
(2020)
Article
Energy & Fuels
Valentin Giglia et al.
PROGRESS IN PHOTOVOLTAICS
(2020)
Review
Physics, Applied
Ralf Preu et al.
APPLIED PHYSICS REVIEWS
(2020)
Proceedings Paper
Energy & Fuels
Radovan Kopecek et al.
2020 47TH IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC)
(2020)
Proceedings Paper
Green & Sustainable Science & Technology
Hannah Stolzenburg et al.
9TH INTERNATIONAL CONFERENCE ON CRYSTALLINE SILICON PHOTOVOLTAICS (SILICONPV 2019)
(2019)
Article
Energy & Fuels
Yifeng Chen et al.
IEEE JOURNAL OF PHOTOVOLTAICS
(2018)
Article
Energy & Fuels
Thorsten Dullweber et al.
PROGRESS IN PHOTOVOLTAICS
(2016)
Proceedings Paper
Energy & Fuels
P. Papet et al.
PROCEEDINGS OF THE FIFTH WORKSHOP ON METALLIZATION FOR CRYSTALLINE SILICON SOLAR CELLS
(2015)
Proceedings Paper
Energy & Fuels
Stefan Braun et al.
PROCEEDINGS OF THE FOURTH WORKSHOP ON METALLIZATION FOR CRYSTALLINE SILICON SOLAR CELLS
(2013)
