☆ 4.7 Article

Efficient recovery of valuable metals from waste printed circuit boards via ultrasound-enhanced flotation

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2023)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Impact of ultrasonic pretreatment on the flotation of lignite particles of different size fractions

Yuqiang Mao et al.

Summary: The impacts of ultrasonic pretreatment on flotation of lignite particles of different size fractions were investigated in this study. The results showed that ultrasonic pretreatment significantly improved the combustible matter recovery of coarse particles, while decreasing the recovery of fine particles. The pretreatment caused more breakage in the 0.125-0.074 mm size fraction compared to other fractions. Additionally, ultrasonic pretreatment removed high ash minerals and reduced pore/cracks, thereby increasing the hydrophobicity and floatability of lignite.

INTERNATIONAL JOURNAL OF COAL PREPARATION AND UTILIZATION (2022)

Add to Collection

Article Environmental Sciences

Recovery of valuable metals from WPCB fines by centrifugal gravity separation and froth flotation

Nazlim Ilkyaz Dinc et al.

Summary: This study focuses on the recycling of gold, silver, and copper from waste printed circuit boards (WPCBs) using physical and physicochemical methods. Various operational factors, such as gravitational force and fluidization water, were studied for their effects on separation performance, resulting in high recovery rates of valuable metals. Foaming techniques and frothers were successfully utilized to produce stable foams and sink products with high metal content from WPCB fines. Overall, a simple and eco-friendly enrichment technique was developed for the concentration of valuable metals before final chemical processing.

JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2022)

Add to Collection

Article Mining & Mineral Processing

Microscale insights into the influence of grinding media on spodumene micro-flotation using mixed anionic/cationic collectors

Liping Luo et al.

Summary: This study investigated the influence of grinding media with different shapes on the flotation performance of spodumene and its potential mechanism from microscale insights. The results showed that rod milled spodumene exhibited higher floatability compared to ball milled ones under anionic/cationic collectors system. The rod medium enhanced the adsorption of collectors on the spodumene surfaces, which can be attributed to the exposure of specific crystal planes and the rougher surface of rod milled products.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Mining & Mineral Processing

Interactions between bubble and particles of key minerals of diasporic bauxite through the extended DLVO theory

Ningning Zhang et al.

Summary: In this paper, the interaction forces between diasporic bauxite minerals (diaspore and aluminosilicate minerals) and air bubbles were investigated using the extended DLVO theory. The results showed that the interactions were mainly repulsive in collectorless solution, and the electrolyte concentration had a significant influence on the interaction forces. The addition of collector reduced the adhesion energy barriers between the minerals and bubbles. Each mineral exhibited a specific interface interaction response with the bubbles under different collector types and pH values.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Mining & Mineral Processing

Insights into the influence of temperature on the adsorption behavior of sodium oleate and its response to flotation of quartz

Shaohang Cao et al.

Summary: In this study, the influence of temperature on the flotation of quartz was investigated. It was found that increasing temperature improved the flotation recovery of quartz by reducing the critical micelle concentration and surface tension of the NaOL solution, increasing the adsorption of calcium species on the quartz surface, and enhancing the interaction between NaOL and the quartz surface.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Engineering, Environmental

Kinetic characteristics and mechanism of copper leaching from waste printed circuit boards by environmental friendly leaching system

Shun-xiang Shi et al.

Summary: This study focused on two environmentally friendly copper leaching systems, ammonia-ammonium chloride leaching system and glycine-hydrogen peroxide leaching system, revealing the factors influencing the leaching rate of copper and proposing a simple yet effective leaching kinetics model.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Efficient recovery of valuable metals in the disposal of waste printed circuit boards via reverse flotation

Yake Yao et al.

Summary: The study investigated the flotation performance of metallic elements in waste printed circuit boards, finding that using diesel oil as the collector yielded better recovery results under specific conditions.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Engineering, Chemical

Detailed insights into improved chlorite removal during hematite reverse flotation by sodium alginate

Yafeng Fu et al.

Summary: Chlorite impairs the hematite reverse flotation pulp, but the addition of sodium alginate can effectively mitigate this issue and enhance chlorite recovery rate. Surface tension, solution viscosity, and foam properties tests revealed that sodium alginate improves foam stability, reducing foam generation time and increasing liquid volume in the foam layer. Theoretical analysis of Plateau's foam structure balance law supports these findings.

MINERALS ENGINEERING (2021)

Add to Collection

Article Engineering, Environmental

Environment-friendly flotation technology of waste printed circuit boards assisted by pyrolysis pretreatment

Chun-chen Nie et al.

Summary: This study proposes a pyrolysis pretreatment method to improve the flotation efficiency of organic components in waste printed circuit boards (WPCBs). The results show that pyrolysis significantly enhances the floatability of organic particles, leading to a significant increase in float yield.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Add to Collection

Article Engineering, Environmental

Recycling of electrode materials from spent lithium-ion battery by pyrolysis-assisted flotation

Guangwen Zhang et al.

Summary: The study shows that at the optimal pyrolysis temperature of 550 degrees C, organics and their pyrolysis products can be adequately removed, leading to changes in the surface properties of cathode and anode materials, and improving flotation efficiency.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Energy & Fuels

Effects of simultaneous ultrasonic treatment on the separation selectivity and flotation kinetics of high-ash lignite

Yuqiang Mao et al.

FUEL (2020)

Add to Collection

Article Energy & Fuels

Effect of microemulsion on low-rank coal flotation by mixing DTAB and diesel oil

Rui Zhang et al.

FUEL (2020)

Add to Collection

Article Engineering, Environmental

Reverse flotation efficiency and mechanism of various collectors for recycling waste printed circuit boards

Yake Yao et al.

WASTE MANAGEMENT (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Metal recovery from waste printed circuit boards by flotation technology with non-ionic renewable collector

Xiang-nan Zhu et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Recycling metals from-0.5 mm waste printed circuit boards by flotation technology assisted by ionic renewable collector

Xiang-nan Zhu et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Engineering, Environmental

Recovery of metals in waste printed circuit boards by flotation technology with soap collector prepared by waste oil through saponification

Xiang-nan Zhu et al.

WASTE MANAGEMENT (2019)

Add to Collection

Article Multidisciplinary Sciences

A Study on the Effect of Ultrasound Irradiation as Pretreatment Method on Flotation of Sedimentary Phosphate Rock with Carbonate-Silicate Gangue

Fatemeh Hassanii et al.

IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY TRANSACTION A-SCIENCE (2019)

Add to Collection

Review Chemistry, Applied

Ultrasonic-assisted flotation of fine coal: A review

Yuqiang Mao et al.

FUEL PROCESSING TECHNOLOGY (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Clean utilization of waste oil: Soap collectors prepared by alkaline hydrolysis for fluorite flotation

Xiang-nan Zhu et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Multidisciplinary Sciences

Enhancement of flaky graphite cleaning by ultrasonic treatment

Wenze Kang et al.

ROYAL SOCIETY OPEN SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Recovery of Precious and Base Metals from Waste Printed Circuit Boards Using a Sequential Leaching Procedure

Altansukh Batnasan et al.

JOM (2018)

Add to Collection

Article Energy & Fuels

Ultrasonic flotation cleaning of high-ash lignite and its mechanism

Yaoli Peng et al.

FUEL (2018)

Add to Collection

Article Engineering, Environmental

Perspectives on reuse of WEEE in China: Lessons from the EU

Bin Lu et al.

RESOURCES CONSERVATION AND RECYCLING (2018)

Add to Collection

Article Engineering, Chemical

A promising physical method for recovery of LiCoO2 and graphite from spent lithium-ion batteries: Grinding flotation

Jiadong Yu et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2018)

Add to Collection

Article Engineering, Chemical

Recovery of residual metals from fine nonmetallic fractions of waste printed circuit boards using a vibrated gas-solid fluidized bed

Guangwen Zhang et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2018)

Add to Collection

Article Engineering, Environmental

High temperature investigations on optimising the recovery of copper from waste printed circuit boards

R. Cayumil et al.

WASTE MANAGEMENT (2018)

Add to Collection

Article Engineering, Environmental

Effect of E-waste Recycling on Urinary Metabolites of Organophosphate Flame Retardants and Plasticizers and Their Association with Oxidative Stress

Shao-you Lu et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Physical

Sulphur removal of iron ore tailings by flotation

Fardis Nakhaei et al.

JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Acoustics

Physical and chemical mechanism underlying ultrasonically enhanced hydrochloric acid leaching of non-oxidative roasting of bastnaesite

Dongliang Zhang et al.

ULTRASONICS SONOCHEMISTRY (2017)

Add to Collection

Article Engineering, Chemical

Flotation experimental research of calcareous-siliceous phosphorite

Biyang Tuo et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2016)

Add to Collection

Article Green & Sustainable Science & Technology

Measuring the recyclability of e-waste: an innovative method and its implications

Xianlai Zeng et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Add to Collection

Article Engineering, Environmental

Two-step bioleaching of copper and gold from discarded printed circuit boards (PCB)

Arda Isildar et al.

WASTE MANAGEMENT (2016)

Add to Collection

Review Green & Sustainable Science & Technology

Waste Printed Circuit Boards recycling: an extensive assessment of current status

B. Ghosh et al.

JOURNAL OF CLEANER PRODUCTION (2015)

Add to Collection

Article Green & Sustainable Science & Technology

Tech-economic evaluation of waste cooking oil to bio-flotation agent technology in the coal flotation industry

Qun Yi et al.

JOURNAL OF CLEANER PRODUCTION (2015)

Add to Collection

Article Engineering, Chemical

Liberation of valuable materials in waste printed circuit boards by high-voltage electrical pulses

C. L. Duan et al.

MINERALS ENGINEERING (2015)

Add to Collection

Article Chemistry, Physical

Recovery of valuable metals from spent lithium-ion batteries by ultrasonic-assisted leaching process

Li Li et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Metallurgy & Metallurgical Engineering

PRELIMINARY STUDIES ON SIMULTANEOUS RECOVERY OF PRECIOUS METALS FROM DIFFERENT WASTE MATERIALS BY PYROMETALLURGICAL METHOD

J. Willner et al.

ARCHIVES OF METALLURGY AND MATERIALS (2014)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Bioleaching of copper from low grade scrap TV circuit boards using mesophilic bacteria

A. D. Bas et al.

HYDROMETALLURGY (2013)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Extraction of metals from waste printed circuit boards (WPCBs) in H2SO4-CuSO4-NaCl solutions

E. Y. Yazici et al.

HYDROMETALLURGY (2013)

Add to Collection

Article Geosciences, Multidisciplinary

The ammonia leaching of alloy produced from waste printed circuit boards smelting process

Yonghun Lim et al.

GEOSYSTEM ENGINEERING (2013)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Recovery of ultrafine copper particles from metal components of waste printed circuit boards

Jian-guang Yang et al.

HYDROMETALLURGY (2012)

Add to Collection

Article Engineering, Chemical

Aqueous metal recovery techniques from e-scrap: Hydrometallurgy in recycling

A. Tuncuk et al.

MINERALS ENGINEERING (2012)

Add to Collection

Review Engineering, Environmental

Recycling of waste printed circuit boards: A review of current technologies and treatment status in China

Kui Huang et al.

JOURNAL OF HAZARDOUS MATERIALS (2009)

Add to Collection

Article Engineering, Electrical & Electronic

Processing waste printed circuit boards for material recovery

William J. Hall et al.

CIRCUIT WORLD (2007)

Add to Collection

Article Engineering, Environmental

Recovery of copper from printed circuit boards scraps by mechanical processing and electrometallurgy

Hugo Marcelo Veit et al.

JOURNAL OF HAZARDOUS MATERIALS (2006)

Add to Collection

Article Engineering, Environmental

Mechanical recycling of waste electric and electronic equipment: a review

JR Cui et al.

JOURNAL OF HAZARDOUS MATERIALS (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.