☆ 4.7 Article

Redefining of potential dust explosion risk parameters for additives in the petrochemical manufacturing process

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2023)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Enhancement of catalytic combustion and thermolysis for treating polyethylene plastic waste

Dengji Xu et al.

Summary: Polyethylene (PE) is a major component of waste plastics with slow natural degradation. Incineration and thermolysis are effective methods for plastic waste treatment. The addition of catalysts like MCM-41 can control burning efficiency and reduce fire risks. HZSM-5 is the most effective catalyst for the conversion of PE to aromatic hydrocarbons.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Add to Collection

Article Thermodynamics

Effects of moisture content on explosion characteristics of incense dust in incense factory

Shun-Chieh Chang et al.

Summary: Incense is essential in Asia for religious and cultural purposes. However, the production of incense can lead to potential hazards such as dust explosions, highlighting the importance of studying and mitigating these risks.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

Add to Collection

Article Engineering, Environmental

Effects of volatile organic compounds on the explosion characteristics of polyethylene dust

Yu -Chi Cheng et al.

Summary: This study investigated the effects of different concentrations of ethylene and propene gas on the explosion characteristics of polyethylene dust. It found that the addition of these gases increased the maximum explosion pressure and decreased the lower explosion limit. Tests conducted in a propene environment also showed stronger explosions.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Add to Collection

Article Engineering, Environmental

Process hazard evaluation and thermal runaway prediction for styrene polymerization initiated by peroxide-azo composites

Andong Yu et al.

Summary: This study investigates the thermal hazards of styrene polymerization using composite initiators and found that the ratio of AIBN to TBPB of 1:1 leads to the lowest thermal risk in the reaction.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Add to Collection

Review Environmental Sciences

Hazardous metal additives in plastics and their environmental impacts

Andrew Turner et al.

Summary: Hazardous metal-based additives are widely present in environmental plastics, with potential impacts including contamination of the waste stream and increasing the density and settling rates of material in aquatic systems.

ENVIRONMENT INTERNATIONAL (2021)

Add to Collection

Article Engineering, Chemical

Risk assessment method of polyethylene dust explosion based on explosion parameters

Lei Pang et al.

Summary: The explosion characteristic parameters of polyethylene dust were systematically investigated, and a risk assessment model was established based on experimental data. It was found that the risk of dust explosion increased with decreasing particle size.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2021)

Add to Collection

Article Engineering, Chemical

Dust cloud explosion characteristics and mechanisms in MgH2-based hydrogen storage materials

Yun-Ting Tsai et al.

Summary: The study found that adding trace amounts of H-2 in Mg explosions can significantly increase explosion severity, while also weakening the impact of oxygen deficiency. Moreover, the explosion intensity of synthetic MgH2 was much stronger than premixed Mg/H-2 mixture or Mg alone due to the formation of vacancy defects in Mg and H atoms after dehydrogenation.

AICHE JOURNAL (2021)

Add to Collection

Article Thermodynamics

Evaluation of the dust potential hazard of thermal power plants through coal dust combustion and explosion characteristics

Yu-Chi Cheng et al.

Summary: Thermal power is the main source of electricity in Taiwan, with coal as the primary fuel, but concerns over fire and explosion hazards caused by coal dust are increasing. This study found that Russian coal had the lowest ignition energy and minimum ignition temperature values, while the minimum dust explosion concentration was 30 g m(-3) in Australian coal.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Engineering, Civil

Inertant effects and mechanism of Al(OH)3 powder on polyethylene dust explosions based on flame propagation behavior and thermal analysis

Song Lin et al.

Summary: The addition of Al(OH)(3) powder has a significant effect on the structure and propagation characteristics of a polyethylene dust explosion flame, by decreasing flame brightness and propagation velocity, and diminishing flame pulsation. Al(OH)(3) powder retards the acceleration of flame propagation and decreases the thermal weight loss of polyethylene, showing significance in the prevention and treatment of polyethylene dust explosion accidents.

FIRE SAFETY JOURNAL (2021)

Add to Collection

Article Engineering, Chemical

Suppression of polyethylene dust explosion by sodium bicarbonate

Yan Wang et al.

POWDER TECHNOLOGY (2020)

Add to Collection

Article Engineering, Environmental

Modification of existing processes for the use of flue gas and polyethylene waste as raw materials with an applied intelligent calculation technique

Anita Kovac Kralj

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

Add to Collection

Article Engineering, Industrial

A comparative analysis of security risk assessment methodologies for the chemical industry

Anita Matteini et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2019)

Add to Collection

Article Polymer Science

Biomedical applications of polyethylene

Naomi C. Paxton et al.

EUROPEAN POLYMER JOURNAL (2019)

Add to Collection

Article Engineering, Environmental

Origin and development of the Godbert-Greenwald furnace for measuring minimum ignition temperatures of dust clouds

Rolf K. Eckhoff

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)

Add to Collection

Article Engineering, Environmental

Inerting effects of ammonium polyphosphate on explosion characteristics of polypropylene dust

Jie Yang et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)

Add to Collection

Article Engineering, Environmental

Criticality analysis of petrochemical assets using risk based maintenance and the fuzzy inference system

Fereshteh Jaderi et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)

Add to Collection

Article Engineering, Multidisciplinary

Fire and Explosion Risks in Petrochemical Plant: Assessment, Modeling and Consequences Analysis

Bekhouche Saloua et al.

JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2019)

Add to Collection

Article Engineering, Chemical

Flame propagation behaviors and temperature characteristics in polyethylene dust explosions

Bo Gan et al.

POWDER TECHNOLOGY (2018)

Add to Collection

Article Engineering, Chemical

A review of very large vapour cloud explosions: Cloud formation and explosion severity

Graham Atkinson et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2017)

Add to Collection

Article Engineering, Chemical

ASTM E2931: A New Standard for the Limiting Oxygen Concentration of Combustible Dusts

Ashok Ghose Dastidar

PROCESS SAFETY PROGRESS (2016)

Add to Collection

Article Engineering, Environmental

Styrofoam Debris as a Source of Hazardous Additives for Marine Organisms

Mi Jang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2016)

Add to Collection

Review Engineering, Chemical

Process safety indicators, a review of literature

Paul Swuste et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2016)

Add to Collection

Article Engineering, Environmental

Dust explosions: A threat to the process industries

Zhi Yuan et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2015)

Add to Collection

Article Engineering, Environmental

A model to assess dust explosion occurrence probability

Junaid Hassan et al.

JOURNAL OF HAZARDOUS MATERIALS (2014)

Add to Collection

Article Engineering, Environmental

Some myths and realities about dust explosions

Paul R. Amyotte

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2014)

Add to Collection

Article Engineering, Chemical

Security Risk Assessment Methodology for the petroleum and petrochemical industries

David A. Moore

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2013)

Add to Collection

Article Engineering, Chemical

Identification and application of security measures for petrochemical industrial control systems

H. M. Leith et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2013)

Add to Collection

Article Engineering, Environmental

Mechanism analysis and risk assessment of escalation scenario in chemical industry zones

Zhang Xin-mei et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2013)

Add to Collection

Review Sociology

Disaster studies

Michael K. Lindell

CURRENT SOCIOLOGY (2013)

Add to Collection

Article Engineering, Chemical

Dust explosion risk moderation for flocculent dusts

Paul R. Amyotte et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2012)

Add to Collection

Article Humanities, Multidisciplinary

A Short History of Oil Cultures: Or, the Marriage of Catastrophe and Exuberance

Frederick Buell

JOURNAL OF AMERICAN STUDIES (2012)

Add to Collection

Article Engineering, Chemical

Does your facility have a dust problem: Methods for evaluating dust explosion hazards

Scott G. Davis et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2011)

Add to Collection

Article Public, Environmental & Occupational Health

Dust explosion causation, prevention and mitigation: An overview

Paul R. Amyotte et al.

JOURNAL OF CHEMICAL HEALTH & SAFETY (2010)

Add to Collection

Article Business

Barriers and drivers for process innovation in the petrochemical industry: A case study

Tao Ren

JOURNAL OF ENGINEERING AND TECHNOLOGY MANAGEMENT (2009)

Add to Collection

Article Engineering, Environmental

Dust explosions: How should the influence of humidity be taken into account?

M. Traore et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2009)

Add to Collection

Article Engineering, Environmental

Application of inherent safety principles to dust explosion prevention and mitigation

Paul R. Amyotte et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2009)

Add to Collection

Article Engineering, Chemical

Moderation of dust explosions

Paul R. Amyotte et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2007)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Process analysis and product quality estimation by Self-Organizing Maps with an application to polyethylene production

J Abonyi et al.

COMPUTERS IN INDUSTRY (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.