☆ 4.5 Article

Foaming behavior of polyamide 1212 elastomers/polyurethane composites with improved melt strength and interfacial compatibility via chain extension

POLYMER ENGINEERING AND SCIENCE (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

Structure and morphology of thermoplastic polyamide 6 elastomers with different soft segment content and their foaming behavior using supercritical CO2

Xiuping Li et al.

Summary: This study synthesized Thermoplastic polyamide elastomers (TPAEs) with superior mechanical and thermal properties, and investigated the impact of crystallization property and microphase separation on their foaming behavior. The variation in molecular weight of the soft segment affected the cell size and density of the foamed TPAEs at different temperatures.

POLYMER ENGINEERING AND SCIENCE (2022)

Add to Collection

Article Engineering, Chemical

The effect of foaming process with supercritical CO2 on the morphology and properties of 3D porous polylactic acid scaffolds

Ioanna-Georgia Athanasoulia et al.

Summary: A systematic study was conducted to investigate the optimal processing conditions for preparing PLA 3D porous structures using foaming with supercritical CO2. The depressurization rate and CO2 saturation pressure played important roles in determining the properties of the resulting structures.

POLYMER ENGINEERING AND SCIENCE (2022)

Add to Collection

Article Polymer Science

Effect of the multi-functional epoxides on the thermal, mechanical and rheological properties of poly(butylene adipate-co-terephthalate)/polylactide blends

D. D. Wu et al.

Summary: The study demonstrated that different types of Joncryl epoxides have varying effects on the properties of PBAT/PLA blends, with ADR4368 showing the best modification effect. Enhancements in mechanical properties and compatibility were observed with the presence of ADR4368.

POLYMER BULLETIN (2021)

Add to Collection

Article Polymer Science

A new class of poly(ether-block-amide)s based on semi-aromatic polyamide: synthesis, characterization and structure-property relations

Xin Tong et al.

Summary: A new type of poly(ether-amide) thermoplastic elastomer with excellent thermal stability and mechanical properties was synthesized based on semi-aromatic polyamide. The composition of hard segments affected the thermal and mechanical properties, with the material showing better performance at high temperatures compared to traditional materials.

POLYMER INTERNATIONAL (2021)

Add to Collection

Review Engineering, Chemical

Recent progress in micro-/nano-fibrillar reinforced polymeric composite foams

Chongxiang Zhao et al.

Summary: A novel method of making microcellular foams with micro-/nano-fibrillar reinforced polymeric composites (M/NFC) is introduced in this work, which offers improved cellular structures, excellent mechanical properties, and enhanced thermal insulation properties compared to conventional foams. The incorporation of micro-/nano-size fibrils strengthens the melt strength, induces faster crystallization, and improves the mechanical properties of the reinforced foams, making them ideal for structural applications and insulative products.

POLYMER ENGINEERING AND SCIENCE (2021)

Add to Collection

Review Engineering, Chemical

Preparation Methods, Performance Improvement Strategies, and Typical Applications of Polyamide Foams

Suyuan Li et al.

Summary: This review provides an overview of the research on polyamide foams, emphasizing effective methods to enhance foam performance and typical applications. It also outlines future research directions and prospects for development.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Add to Collection

Article Chemistry, Physical

Preparation and properties of thermoplastic polyurethane foams with bimodal structure based on TPU/PDMS blends

Bozhen Wu et al.

Summary: Aiming to fabricate polymer foams with bimodal structures remains challenging in both industrial and academic fields. By mixing PDMS into TPU and utilizing the foaming dynamics difference between the two materials, foams with distinct bimodal structures were successfully prepared. These bimodal structure foams exhibit excellent compressive strength and modulus, as well as higher sound insulation compared to foams with uniform structures.

JOURNAL OF SUPERCRITICAL FLUIDS (2021)

Add to Collection

Article Polymer Science

Microcellular foaming of poly(lactic acid) branched with food-grade chain extenders

Krishnaa B. Venkatesan et al.

Summary: The study found that low epoxy equivalent weight (EEW) chain extenders (CE) were more effective than high EEW CE in branching PLA, resulting in improved cell structure uniformity and foam expansion. Adding 0.25% CE could provide the appropriate melt viscosity to produce optimum quality PLA foam.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Engineering, Chemical

Relationship between microstructure and mechanical properties of polyether block amide foams

Esteve Ernault et al.

Summary: The mechanical behaviors of five polyether block amide foams obtained by mold-opening foam injection process were investigated based on their microstructures, which were characterized in terms of cavity size and shape ratios. The foam responses in compression at small and large strain were analyzed, showing that the hard versus soft segments ratio and microstructure fineness play important roles. Viscoelasticity at large strain was characterized, with reduced packing time and pressure leading to undesired large cavities impacting the mechanical behavior of the foams at large strain.

POLYMER ENGINEERING AND SCIENCE (2021)

Add to Collection

Article Polymer Science

Sustainable polyamide elastomers from a bio-based dimer diamine for fabricating highly expanded and facilely recyclable microcellular foams via supercritical CO2 foaming

Yi-Huan Lee et al.

Summary: In this study, a sustainable polyamide foam system was developed using a bio-based dimer diamine monomer to synthesize a new series of polyamide elastomers. The introduction of the branched-structured dimer diamine monomer effectively enhanced nucleation sites for cell growth and melt strength, overcoming traditional polyamide 6 foaming difficulties. The foam system showed high expansion ratio and robust dimensional stability, with the added benefit of being recyclable and reprocessable due to non-crosslinking and additive-free properties.

EUROPEAN POLYMER JOURNAL (2021)

Add to Collection

Article Engineering, Chemical

Facile Fabrication of Lightweight Shape Memory Thermoplastic Polyurethane/Polylactide Foams by Supercritical Carbon Dioxide Foaming

Wei Wang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Add to Collection

Article Engineering, Chemical

Structure and Morphology of Thermoplastic Polyamide Elastomer Based on Long-Chain Polyamide 1212 and Renewable Poly(trimethylene glycol)

Jie Jiang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Recent advances in additive manufacturing of engineering thermoplastics: challenges and opportunities

Maisyn Picard et al.

RSC ADVANCES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Mesophase Structure-Enabled Electrostrictive Property in Nylon-12-Based Poly(ether-block-amide) Copolymers

Thumawadee Wongwirat et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2019)

Add to Collection

Article Engineering, Manufacturing

Fabrication of thermoplastic polyurethane (TPU) / thermoplastic amide elastomer (TPAE) composite foams with supercritical carbon dioxide and their mechanical properties

Chun-Ta Yu et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

Add to Collection

Article Engineering, Chemical

Hot melt adhesive properties of PA/TPU blends compatibilized by EVA-g-MAH

Xianlu Pan et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Polymer Science

Chain extension of polyamide 6 using multifunctional chain extenders and reactive extrusion for melt foaming

Menglong Xu et al.

EUROPEAN POLYMER JOURNAL (2017)

Add to Collection

Article Polymer Science

Characterization of hard-segment crystalline phase of poly(ether-block-amide) (PEBAX®) thermoplastic elastomers in the presence of supercritical CO2 and its impact on foams

Mohamad Reza Barzegari et al.

POLYMER (2017)

Add to Collection

Article Polymer Science

In situ compatibilization of polylactide/thermoplastic polyester elastomer blends using a multifunctional epoxide compound as a processing agent

Sisi Wang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2016)

Add to Collection

Article Polymer Science

Study on the effect of dispersion phase morphology on porous structure of poly (lactic acid)/poly (ethylene terephthalate glycol-modified) blending foams

Xiangdong Wang et al.

POLYMER (2013)

Add to Collection

Article Polymer Science

Improvement of thermal stability, rheological and mechanical properties of PLA, PBAT and their blends by reactive extrusion with functionalized epoxy

Racha Al-Itry et al.

POLYMER DEGRADATION AND STABILITY (2012)

Add to Collection

Article Polymer Science

Synthesis and characteristics of thermoplastic elastomer based on polyamide-6

Chunwang Yi et al.

POLYMER INTERNATIONAL (2011)

Add to Collection

Article Mechanics

Melt strengthening of poly (lactic acid) through reactive extrusion with epoxy-functionalized chains

Yves-Marie Corre et al.

RHEOLOGICA ACTA (2011)

Add to Collection

Article Engineering, Mechanical

Frequency- and strain-amplitude-dependent dynamical mechanical properties and hysteresis loss of CB-filled vulcanized natural rubber

Wenbo Luo et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2010)

Add to Collection

Article Polymer Science

Long chain branching polylactide: Structures and properties

Jianye Liu et al.

POLYMER (2010)

Add to Collection

Article Engineering, Chemical

Interaction of thermoplastic polyurethane with polyamide 1212 and its influence on the thermal and mechanical properties of TPU/PA1212 blends

Wanli Li et al.

POLYMER ENGINEERING AND SCIENCE (2008)

Add to Collection

Article Chemistry, Physical

Foaming of polypropylene with supercritical carbon dioxide

Zhi-Mei Xu et al.

JOURNAL OF SUPERCRITICAL FLUIDS (2007)

Add to Collection

Article Thermodynamics

Oligomeric chain extenders for economic reprocessing and recycling of condensation plastics

M. Villalobos et al.

ENERGY (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Reactively modified poly(lactic acid): Properties and foam processing

YW Di et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2005)

Add to Collection

Article Polymer Science

Crystallization kinetics and morphology of nylon 1212

MQ Ren et al.

POLYMER (2004)

Add to Collection

Article Polymer Science

Dynamic mechanical properties and hysteresis loss of epoxidized natural rubber chemically bonded to the silica surface

AK Manna et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.