☆ 4.7 Article

Degradation mechanism of FKM during thermo-oxidative aging from mechanical and network structure correlations

POLYMER DEGRADATION AND STABILITY (2023)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Detection of the Destruction Mechanism of Perfluorinated Elastomer (FFKM) Network under Thermo-oxidative Aging Conditions

Wen-Yue Zhuo et al.

Summary: The changes in the crosslinking network of perfluorinated elastomer (FFKM) cured by TAIC and DBPH under thermo-oxidative aging conditions were studied. The network destruction becomes dominant with increasing aging temperature, mainly occurring on the crosslink points of TAIC structure. The post-curing is mainly caused by the decomposition of residual curing agent DBPH. TGA-FTIR-GC-MS test reveals that the destruction of TAIC crosslinking points occurs first on the unstable exocyclic C-N bonds. A schematic degradation process of TAIC structure was proposed.

CHINESE JOURNAL OF POLYMER SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Thiol-ene polymer beads via liquid-liquid printing: armored interfaces and photopolymerization via graphitic carbon nitride

Cansu Esen et al.

Summary: This paper presents a liquid-liquid printing technique based on graphitic carbon nitride, which can form thiol-ene polymer beads through photopolymerization in a simple and scalable manner.

NANOSCALE ADVANCES (2022)

Add to Collection

Article Materials Science, Composites

High-performance fluoroelastomer-graphene nanocomposites for advanced sealing applications

Mufeng Liu et al.

Summary: In this study, graphene nanoplatelets (GNPs) were incorporated into a fluoroelastomer (FKM) matrix to enhance its mechanical and barrier properties for sealing applications. The GNPs were able to significantly improve the tensile and barrier properties of the FKM, showing promising potential for advanced sealing applications. The nanocomposites filled with GNPs exhibited superior performance at relatively low filler loadings.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Characterization & Testing

New evaluation method for the curing degree of rubber and its nanocomposites using ATR-FTIR spectroscopy

Shun Muroga et al.

Summary: A nondestructive method using ATR-FTIR spectroscopy was proposed to evaluate the curing degree of cured rubbers and their nanocomposites, specifically in fluorine-based rubber. The study found that the FWHM of the C=O band can be used as a standard to measure the crosslinking density, showing good applicability in the presence of various nanofillers. Additionally, the study revealed that FWHM was more sensitive to changes in crosslinking density when fillers like CNTs were added to the rubber compared to changes in Young's modulus.

POLYMER TESTING (2021)

Add to Collection

Article Polymer Science

Volume Resistivity of Viton Polymer under Thermal Aging

Alireza Abdihamzehkolaei et al.

Summary: This study investigates the influence of various electrical parameters on the volume resistivity of Viton fluoroelastomer and compares new and aged samples. The results show that both new and aged samples exhibit decreased resistivity with increasing temperature, with aged samples consistently showing lower resistivity. Additionally, the study found that volume resistivity is inversely proportional to the applied voltage and aging leads to higher surface roughness and cracks on Viton samples, impacting performance under high voltage applications.

POLYMERS (2021)

Add to Collection

Article Materials Science, Composites

Siligraphen/g-C3N4 nanocomposites as the novel nanofillers for improving the thermal and mechanical properties of fluoroelastomer

Somayeh Darvishi et al.

Summary: Novel nano-filled fluoroelastomer composites with excellent thermal and mechanical properties were prepared using Siligraphene, g-C3N4, and Siligraphene/g-C3N4 composites. The nanocomposites showed improved tensile properties of FKM before and after exposure to heat aging test, with Si and N dopants enhancing the reinforcement of properties. Overall, the nanofillers provided better adhesion with FKM matrix, forming a cellulation structure that improved mechanical properties and prevented rubber decomposition at high temperatures.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Polymer Science

Accelerated Aging Behaviors and Mechanism of Fluoroelastomer in Lubricating Oil Medium

Qi-Long Wang et al.

CHINESE JOURNAL OF POLYMER SCIENCE (2020)

Add to Collection

Article Polymer Science

Thermal and thermo-oxidative degradation of tetrafluoroethylene-propylene elastomer above 300 °C

Qingkun Liu et al.

POLYMER DEGRADATION AND STABILITY (2020)

Add to Collection

Article Polymer Science

Insights for lifetime predictions of O-ring seals from five-year long-term aging tests

Anja Koemmling et al.

POLYMER DEGRADATION AND STABILITY (2020)

Add to Collection

Article Polymer Science

About thermo-oxidative ageing at moderate temperature of conventionally vulcanized natural rubber

Francois Grasland et al.

POLYMER DEGRADATION AND STABILITY (2019)

Add to Collection

Article Materials Science, Characterization & Testing

Effects of sorption and desorption of CO2 on the thermomechanical experimental behavior of HNBR and FKM O-rings - Influence of nanofiller-reinforced rubber

E. Laine et al.

POLYMER TESTING (2019)

Add to Collection

Article Materials Science, Characterization & Testing

Predictive power in oil resistance of fluororubber and fluorosilicone rubbers based on three-dimensional solubility parameter theory

Yuan Zhuo Wang et al.

POLYMER TESTING (2019)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Dehydrofluorination mechanism, structure and thermal stability of pure fluoroelastomer (poly(VDF-ter-HFP-ter-TFE) terpolymer) in alkaline environment

Donghan Li et al.

JOURNAL OF FLUORINE CHEMISTRY (2017)

Add to Collection

Article Polymer Science

Improvement in thermal durability of fluorinated rubber by the addition of single-walled carbon nanotubes as a thermally stable radical scavenger

Seisuke Ata et al.

POLYMER (2017)

Add to Collection

Article Polymer Science

Degradation of fluoroelastomers in rapeseed biodiesel at different oxygen concentrations

S. Akhlaghi et al.

POLYMER DEGRADATION AND STABILITY (2017)

Add to Collection

Article Polymer Science

VULCANIZATION OF RUBBER COMPOUNDS WITH PEROXIDE CURING SYSTEMS

Jan Kruzelak et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2017)

Add to Collection

Article Humanities, Multidisciplinary

Polyurethane coatings used in twentieth century outdoor painted sculptures. Part I: comparative study of various systems by means of ATR-FTIR spectroscopy

Catherine Defeyt et al.

HERITAGE SCIENCE (2017)

Add to Collection

Article Materials Science, Composites

Improving the thermal properties of fluoroelastomer (Viton GF-600S) using carbon nanotube

Javad Heidarian et al.

COMPOSITE INTERFACES (2016)

Add to Collection

Article Polymer Science

Degradation of different elastomeric polymers in simulated geothermal environments at 300 °C

Toshifumi Sugama et al.

POLYMER DEGRADATION AND STABILITY (2015)

Add to Collection

Article Polymer Science

Influence of mixed sulfur/peroxide curing system and thermo-oxidative ageing on the properties of rubber magnetic composites

Jan Kruzelak et al.

JOURNAL OF POLYMER RESEARCH (2014)

Add to Collection

Article Chemistry, Multidisciplinary

A study on the characteristics of a rubber blend of fluorocarbon rubber and hydrogenated nitrile rubber

Youn-Gu Yeo et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2013)

Add to Collection

Review Polymer Science

Review of polymer oxidation and its relationship with materials performance and lifetime prediction

Mathew C. Celina

POLYMER DEGRADATION AND STABILITY (2013)

Add to Collection

Article Chemistry, Inorganic & Nuclear

An in-depth in situ IR study of the thermal decomposition of copper trifluoroacetate hydrate

M. Mosiadz et al.

JOURNAL OF FLUORINE CHEMISTRY (2012)

Add to Collection

Article Thermodynamics

An in-depth in situ IR study of the thermal decomposition of barium trifluoroacetate hydrate

M. Mosiadz et al.

THERMOCHIMICA ACTA (2011)

Add to Collection

Article Polymer Science

Aging behavior and thermal degradation of fluoroelastomer reactive blends with poly-phenol hydroxy EPDM

Yaming Wang et al.

POLYMER DEGRADATION AND STABILITY (2009)

Add to Collection

Article Spectroscopy

FTIR spectra of plasticized grafted natural rubber-LiCF3SO3 electrolytes

K. Kumutha et al.

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2006)

Add to Collection

Article Polymer Science

Chemical degradation of fluoroelastomer in an alkaline environment

S Mitra et al.

POLYMER DEGRADATION AND STABILITY (2004)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Perfluoroelastomer and fluoroelastomer seals for semiconductor wafer processing equipment

SH Wang et al.

JOURNAL OF FLUORINE CHEMISTRY (2003)

Add to Collection

Article Spectroscopy

Infrared spectrum of solid isocyanic acid (HNCO): vibrational assignments and integrated band intensities

MS Lowenthal et al.

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2002)

Add to Collection

Article Polymer Science

Novel thermoplastic elastomers from fluorocarbon elastomer, acrylate rubber and acrylate plastics

MA Kader et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2001)

Add to Collection

Review Polymer Science

Fluoroelastomers:: synthesis, properties and applications

B Améduri et al.

PROGRESS IN POLYMER SCIENCE (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.