Related references
Note: Only part of the references are listed.Role of Interfacial Postreaction during Thermal Treatment: Toward a Better Understanding of the Toughness of PLLA/Reactive Elastomer Blends
Yingding Qu et al.
MACROMOLECULES (2022)
Syntheses and properties of tri- and multi-block copolymers consisting of polybutadiene and polylactide segments
Zhengyue Wang et al.
RSC ADVANCES (2022)
Block Copolymer and Nanosilica-Modified Epoxy Nanocomposites
Vincent Pang et al.
ACS APPLIED POLYMER MATERIALS (2021)
Stable Co-Continuous PLA/PBAT Blends Compatibilized by Interfacial Stereocomplex Crystallites: Toward Full Biodegradable Polymer Blends with Simultaneously Enhanced Mechanical Properties and Crystallization Rates
Jiali Chen et al.
MACROMOLECULES (2021)
Arrested Elongated Interface with Small Curvature by the Simultaneous Reactive Compatibilization and Stereocomplexation
Hengti Wang et al.
MACROMOLECULES (2020)
Crazing Mechanism and Physical Aging of Poly(lactide) Toughened with Poly(ethylene oxide)-block-poly(butylene oxide) Diblock Copolymers
Charles J. McCutcheon et al.
MACROMOLECULES (2020)
Super tough poly(lactic acid) blends: a comprehensive review
Xipo Zhao et al.
RSC ADVANCES (2020)
Biodegradable silica rubber core-shell nanoparticles and their stereocomplex for efficient PLA toughening
Zibiao Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Bio-Based PLA/NR-PMMA/NR Ternary Thermoplastic Vulcanizates with Balanced Stiffness and Toughness: Soft-Hard Core-Shell Continuous Rubber Phase, In Situ Compatibilization, and Properties
Yukun Chen et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
Statistical optimization of compatibilized blends of poly(lactic acid) and acrylonitrile butadiene styrene
Ryan Vadori et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Improvement in toughness of polylactide/poly(butylene adipate-co-terephthalate) blend by adding nitrile rubber
Teresa Maria Dias Fernandes et al.
POLYMER BULLETIN (2017)
Super-tough Poly(lactide) Thermoplastic Vulcanizates Based on Modified Natural Rubber
Ningjing Wu et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)
Tailor-Made Dispersion and Distribution of Stereocomplex Crystallites in Poly(L-lactide)/Elastomer Blends toward Largely Enhanced Crystallization Rate and Impact Toughness
Yuanlin Luo et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2017)
Block Copolymer Micelle Toughened Isotactic Polypropylene
Jun Xu et al.
MACROMOLECULES (2017)
Remarkably Enhanced Impact Toughness and Heat Resistance of poly(L-Lactide)/Thermoplastic Polyurethane Blends by Constructing Stereocomplex Crystallites in the Matrix
Zhenwei Liu et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)
Catechin-Modified Polylactide Stereocomplex at Chain End Improved Antibiobacterial Property
Hiroharu Ajiro et al.
MACROMOLECULAR BIOSCIENCE (2016)
How a Small Modification of the Corona-Forming Block Redirects the Self-Assembly of Crystalline-Coil Block Copolymers in Solution
Maria Jose Gonzalez-Alvarez et al.
MACROMOLECULES (2016)
Toughening Glassy Poly(lactide) with Block Copolymer Micelles
Tuoqi Li et al.
ACS MACRO LETTERS (2016)
Recent Progress in Using Stereocomplexation for Enhancement of Thermal and Mechanical Property of Polylactide
Beng Hoon Tan et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)
Perspective on Polylactic Acid (PLA) based Sustainable Materials for Durable Applications: Focus on Toughness and Heat Resistance
Vidhya Nagarajan et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)
Cell Morphology and Improved Heat Resistance of Microcellular Poly(L-lactide) Foam via Introducing Stereocomplex Crystallites of PLA
Pin Jia et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
Superior Performance of Fully Biobased Poly(lactide) via Stereocomplexation-Induced Phase Separation: Structure versus Property
Piming Ma et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2015)
Supertoughened Renewable PLA Reactive Multiphase Blends System: Phase Morphology and Performance
Kunyu Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Stereocomplex Crystallite Network in Asymmetric PLLA/PDLA Blends: Formation, Structure, and Confining Effect on the Crystallization Rate of Homocrystallites
Xin-Feng Wei et al.
MACROMOLECULES (2014)
Improving impact toughness of polylactide/poly(ether)urethane blends via designing the phase morphology assisted by hydrophilic silica nanoparticles
Hao Xiu et al.
POLYMER (2014)
In situ formed crosslinked polyurethane toughened polylactide
Guang-Chen Liu et al.
POLYMER CHEMISTRY (2014)
Improved mechanical and thermal properties of PLLA by solvent blending with PDLA-b-PEG-b-PDLA
Yanlong Liu et al.
POLYMER DEGRADATION AND STABILITY (2014)
In-situ compatibilization of poly(lactic acid) and poly(butylene adipate-co-terephthalate) blends by using dicumyl peroxide as a free-radical initiator
P. Ma et al.
POLYMER DEGRADATION AND STABILITY (2014)
Towards high-performance poly(L-lactide)/elastomer blends with tunable interfacial adhesion and matrix crystallization via constructing stereocomplex crystallites at the interface
Hongwei Bai et al.
RSC ADVANCES (2014)
Co-toughened Polystyrene by Submicrometer-Sized Core-Shell Rubber Particles and Micrometer-Sized Salami Rubber Particles
Yunjiao Deng et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)
Rubber toughening of poly(lactic acid): Effect of stereocomplex formation at the rubber-matrix interface
Suming Ye et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Biodegradable Core-Shell Rubber Nanoparticles and Their Toughening of Poly(lactides)
Yang Sun et al.
MACROMOLECULES (2013)
Toughening of poly(L-lactide) with poly(epsilon-caprolactone): Combined effects of matrix crystallization and impact modifier particle size
Hongwei Bai et al.
POLYMER (2013)
Tailoring Impact Toughness of Poly(L-lactide)/Poly(ε-caprolactone) (PLLA/PCL) Blends by Controlling Crystallizatior of PLLA Matrix
Hongwei Bai et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Transparent and ductile poly(lactic acid)/poly(butyl acrylate) (PBA) blends: Structure and properties
Bing Meng et al.
EUROPEAN POLYMER JOURNAL (2012)
How Well Can Renewable Resources Mimic Commodity Monomers and Polymers?
Robert T. Mathers
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2012)
Evidence of a dual network/spherulitic crystalline morphology in PLA stereocomplexes
Sajjad Saeidlou et al.
POLYMER (2012)
Effect of midblock on the morphology and properties of blends of ABA triblock copolymers of PDLA-mid-block-PDLA with PLLA
Sahas R. Rathi et al.
POLYMER (2012)
Research Progress in Toughening Modification of Poly(lactic acid)
Hongzhi Liu et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2011)
Interaction of Microstructure and Interfacial Adhesion on Impact Performance of Polylactide (PLA) Ternary Blends
Hongzhi Liu et al.
MACROMOLECULES (2011)
An overview of the recent developments in polylactide (PLA) research
K. Madhavan Nampoothiri et al.
BIORESOURCE TECHNOLOGY (2010)
Polylactide (PLA) designed with desired end-use properties: 1. PLA compositions with low molecular weight ester-like plasticizers and related performances
Marius Murariu et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2008)
Increased impact strength of biodegradable poly(lactic acid)/poly(butylene succinate) blend composites by using isocyanate as a reactive processing agent
Masaki Harada et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Poly(lactic acid) fiber: An overview
Bhuvanesh Gupta et al.
PROGRESS IN POLYMER SCIENCE (2007)
Thermal and mechanical properties of plasticized poly(L-lactic acid)
M Baiardo et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
In vitro hydrolysis of blends from enantiomeric poly(lactide)s Part 1. Well-stereo-complexed blend and non-blended films
H Tsuji
POLYMER (2000)
Share Paper
