4.6 Article

Visible-light-enhanced photocatalytic activity of BaTiO3/γ-Al2O3 composite photocatalysts for photodegradation of tetracycline hydrochloride

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Preparation of core-shell heterojunction photocatalysts by coating CdS nanoparticles onto Bi4Ti3O12 hierarchical microspheres and their photocatalytic removal of organic pollutants and Cr(VI) ions

Tingting Cheng et al.

Summary: Researchers successfully constructed core-shell BTO/CdS heterojunction photocatalysts, which exhibit excellent photocatalytic activity in degrading dyes and harmful ions. The enhanced photocatalytic mechanism of BTO/CdS heterojunction photocatalysts was discussed based on a Z-scheme carrier transfer process.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Review Environmental Sciences

Antibiotics, antibiotic-resistant bacteria, and resistance genes in aquaculture: risks, current concern, and future thinking

Anwar Hossain et al.

Summary: Aquaculture is a highly promising industry, but the use of antibiotics and the transmission of resistant genes in the aquatic environment may have adverse effects on human and animal health. Data related to antibiotic usage and bacterial resistance in aquaculture is limited in major aquaculture-producing countries. Global efforts should be made to monitor antibiotic concentration, assess the risks associated with resistant bacteria, and establish regulations for antibiotic use in fish and shellfish farming.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

Article Engineering, Chemical

Construction of Dual-Defective Al2O3/Bi12O17Cl2 Heterojunctions for Enhanced Photocatalytic Molecular Oxygen Activation via Defect Coupling and Charge Separation

Qi Li et al.

Summary: Adjusting the surface/interface of photocatalysts to promote molecular oxygen activation is an effective way to improve photocatalytic performance. In this study, dual-defective Al2O3/Bi12O17Cl2 heterostructured photocatalysts were synthesized, revealing enhanced defects and molecular oxygen adsorption, leading to improved photocatalytic oxidation capability.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2022)

Article Materials Science, Multidisciplinary

Constructing a novel AuAg/BiOBr/BaTiO3 composite via selective decoration route with enhanced visible-light photoatalytic performance

Tao Xian et al.

Summary: In this work, BaTiO3 nanoparticles were decorated on BiOBr nanoplates and AuAg alloy nanoparticles were selectively deposited on the uncovered surface of BiOBr nanoplates to form AuAg/BiOBr/BaTiO3 composite. The composites exhibited enhanced photocatalytic activity and the optimal photocatalytic efficiency was achieved with BiOBr/10%BaTiO3 composite. The further enhancement of photocatalytic activity was achieved by selective deposition of Au, Ag and AuAg alloy nanoparticles, with AuAg/BiOBr/10%BaTiO3 composite showing the best photocatalytic activity.

OPTICAL MATERIALS (2022)

Article Engineering, Chemical

A simple polyacrylamide gel route for the synthesis of MgAl2O4 nanoparticles with different metal sources as an efficient adsorbent: Neural network algorithm simulation, equilibrium, kinetics and thermodynamic studies

Hao Liu et al.

Summary: The study used a polyacrylamide gel method to prepare MgAl2O4 nanoparticles with different particle sizes for the removal of dyes from wastewater. A neural network prediction model was established to predict the effect of synthesis parameters on the phase purity of MgAl2O4. The adsorption experiments showed different adsorption performances of MgAl2O4 nanoparticles for Congo red, acid orange 7 and acid fuchsin under various experimental conditions.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Chemistry, Physical

ZnO hollow pitchfork: coupled photo-piezocatalytic mechanism for antibiotic and pesticide elimination

Aditi Sharma et al.

Summary: The use of zinc oxide hollow pitchfork in photo-piezocatalytic degradation of organic dye, pesticide, and antibiotic in aqueous solutions showed significantly higher decomposition ratios and catalytic activity compared to traditional photocatalysis and piezocatalysis methods. The strain-driven polarized electric field in the ZnO pitchfork promotes the separation of photogenerated electron-hole pairs, leading to enhanced photocatalytic performance. This study highlights the potential of capturing light and vibrational energy from natural surroundings to improve pollutant decomposition catalytic performance.

CATALYSIS SCIENCE & TECHNOLOGY (2022)

Article Chemistry, Physical

Facile synthesis and application of CdS/Bi20TiO32/Bi4Ti3O12 ternary heterostructure: A synergistic multi-heterojunction photocatalyst for enhanced endosulfan degradation and hydrogen evolution reaction

Krishnendu Das et al.

Summary: The manufacture of CdS/Bi20TiO32/Bi4Ti3O12 (CdSxBTC) composite photocatalysts with visible light response and synergistic electron migration is effective for water treatment and renewable energy generation. The composite materials showed enhanced photocatalytic activity for endosulfan degradation and water splitting, as well as non-cytotoxicity, with a proposed Type-I bridged coupled Z-scheme electron migration process for robust radical generation and photocatalytic activity.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Article Chemistry, Physical

Investigation of surface defects in BaTiO3 nanopowders studied by XPS and positron annihilation lifetime spectroscopy

K. Siemek et al.

Summary: The defect structures of BaTiO3 nanoparticles annealed in the air and their correlation with magnetic properties were studied using XPS and positron annihilation lifetime spectroscopy. It was found that annealing at different temperatures can create additional oxygen vacancies and influence the reduction of Ti, impacting the nanoparticle magnetism. The complementary XPS and positron annihilation spectroscopy were effective tools for determining the nanoparticle surface defect structure, with potential applications in fabricating rare room-temperature multiferroics materials.

APPLIED SURFACE SCIENCE (2022)

Article Optics

A novel photoluminescence phenomenon in a SrMoO4/SrWO4 micro/nano heterojunction phosphors obtained by the polyacrylamide gel method combined with low temperature calcination technology

Huajing Gao et al.

Summary: The polyacrylamide gel method combined with low temperature calcination technology was used to synthesize SrMoO4/SrWO4 micro/nano heterojunction phosphors with excellent photoluminescence properties. The study found that SrMoO4 and SrWO4 formed a special interface contact, generating a large number of oxygen vacancies, which enhanced the photoluminescence properties of the material.

JOURNAL OF LUMINESCENCE (2022)

Article Materials Science, Multidisciplinary

Significant study of BaTiO3 as a cathode for magnesium battery applications

Nasser Yacout et al.

Summary: This paper attempts to modify the structure of barium titanate (BTO) by electrochemical insertion of magnesium ions, in order to improve its performance as a cathode material for metal-ion batteries. The results show that the insertion of magnesium ions and heat treatment can induce a structure transformation in BTO, and the magnesized BTO exhibits higher initial specific capacity in the assembled batteries.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Article Chemistry, Physical

Type-II CdS/PtSSe heterostructures used as highly efficient water-splitting photocatalysts

Guangzhao Wang et al.

Summary: The design of two-dimensional heterostructures is an effective way to modify the properties of 2D materials. In this study, CdS/PtSSe heterostructures were investigated for their photocatalytic activity using first-principles calculations. The results showed that the small lattice mismatches and negative interface formation energies made the CdS/PtSSe heterostructures feasible, with small bandgaps allowing them to efficiently absorb visible light. The stacking configurations had little effect on the electronic structures, but the contact sides could switch between type-I and type-II heterostructures. The type-II CdS/PtSSe heterostructures promoted the separation of photogenerated carriers, while the band edges fulfilled the thermodynamic requirements for photocatalytic water-splitting, achieving solar-to-hydrogen efficiencies of up to 37.5%.

APPLIED SURFACE SCIENCE (2022)

Article Chemistry, Physical

Comparative investigation on synthesis, morphological tailoring and photocatalytic activities of Bi2O2CO3 nanostructures

Liexiao Li et al.

Summary: This study focuses on synthesizing various Bi(2)O(2)CO(3) nanostructures and comparing their photocatalytic activities. The nanoparticles show the highest photodegradation activity for MB, while the hierarchical nanotubes exhibit the highest photoreduction activity for Cr(VI) ions.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Article Materials Science, Ceramics

Photocatalytic degradation of Basic Blue 41 dye under visible light over SrTiO3/Ag3PO4 hetero-nanostructures

Soheila Kafian et al.

Summary: Nanostructured SrTiO3/Ag3PO4 heterostructures with high performance were successfully developed for photocatalysis. The heterostructures exhibited significantly improved photocatalytic degradation compared to pure SrTiO3 nanorods and Ag3PO4 nanoparticles, showing a synergistic effect between the two materials.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2022)

Article Nanoscience & Nanotechnology

Spinel CuB2O4 (B = Fe, Cr, and Al) Oxides for Selective Adsorption of Congo Red and Photocatalytic Removal of Antibiotics

Mengjun Han et al.

Summary: A polyacrylamide gel method was used to synthesize nano-CuB2O4 with different phase structures. CuAl2O4 oxide showed superior properties, including smaller particle size, high adsorption capacity, and high photocatalytic activity.

ACS APPLIED NANO MATERIALS (2022)

Article Engineering, Chemical

Skillfully grafted C-O functional group to enhance the adsorption/photocatalytic mechanism of YMnO3/MgAl2O4 heterojunction photocatalysts

Shifa Wang et al.

Summary: YMnO3 with different manganese salts were synthesized, and the effects of manganese salts on the structure and properties of YMnO3 were studied. Pure YMnO3 with uniform particles was obtained using C4H6MnO4·4H2O as the manganese source. The YMnO3/MgAl2O4 photocatalyst with 10% MgAl2O4 exhibited high optical absorption coefficient and degradation efficiency for various pollutants. Hydroxyl and superoxide radicals played a dominant role in the photocatalytic degradation process. This study explores the potential application of YMO/MAO as adsorption/degradation catalysts for dyes, antibiotics, and persistent organic pollutants, providing technical reference for the synthesis of other heterojunction photocatalysts.

ADVANCED POWDER TECHNOLOGY (2022)

Article Environmental Sciences

Boosting the photocatalytic performance of Bi2Fe4O9 through formation of Z-scheme heterostructure with In2S3: Applications towards water decontamination

Krishnendu Das et al.

Summary: This study reports a facile fabrication method of In2S3/Bi2Fe4O9 binary heterostructure, which shows great potential in micropollutant degradation and pathogen deactivation. In-depth characterization reveals broad spectrum UV-Vis absorption, large interfacial contact, improved charge carrier separation and mobility, and longer excited state lifetime for ISxBFO heterostructure materials. The integration of In2S3 with Bi2Fe4O9 enhances the optoelectrical and photocatalytic properties of pristine Bi2Fe4O9.

CHEMOSPHERE (2022)

Article Materials Science, Ceramics

A novel lead hexagonal ferrite (PbFe12O19) magnetic separation catalyst with excellent ultrasonic catalytic activity

Xiangyu Chen et al.

Summary: Novel PbFe12O19 magnetic separation catalysts (PFOMSCs) with high specific activity were synthesized, and they have the potential for the removal of RhB dye from wastewater.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2022)

Article Chemistry, Physical

Template-free synthesis of Bi2O2CO3 hierarchical nanotubes self-assembled from ordered nanoplates for promising photocatalytic applications

Liexiao Li et al.

Summary: In this study, hierarchical Bi2O2CO3 nanotubes were synthesized via a one-step hydrothermal route. The effects of reaction time on the morphology and performance of the nanotubes were investigated. The 3-hour-derived nanotubes exhibited the highest photocatalytic performance and were capable of degrading various organic pollutants and purifying simulated industrial wastewater.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2022)

Article Nanoscience & Nanotechnology

BiPO4 Nanorod/Graphene Composite Heterojunctions for Photocatalytic Degradation of Tetracycline Hydrochloride

Yajun Wang et al.

Summary: Manipulating the built-in electric fields of heterojunctions is an effective method to enhance photogenerated charge separation and promote photocatalytic activity, as demonstrated in the BiPO4/GA hydrogel system.

ACS APPLIED NANO MATERIALS (2021)

Article Engineering, Environmental

Photocatalysis activation of peroxodisulfate over the supported Fe3O4 catalyst derived from MIL-88A(Fe) for efficient tetracycline hydrochloride degradation

Xiu-Wu Zhang et al.

Summary: The Fe3O4@PBS (M-Fe3O4-T@PBS) catalyst, prepared by immobilizing MIL-88A(Fe) particles onto a commercial porous block substrate and further calcining at high temperatures, showed great potential for tetracycline hydrochloride (TC) degradation in wastewater under white light and sunlight irradiation. The catalyst exhibited high degradation efficiency, simple recyclability, and excellent reusability even after 30 successive cycles. The study also investigated the degradation mechanism and possible pathways of TC degradation using various analytical techniques. Overall, immobilized Fe-based MOFs derivatives catalysts have significant potential for real and large-scale wastewater treatment.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

A comprehensive insight into plasma-catalytic removal of antibiotic oxytetracycline based on graphene-TiO2-Fe3O4 nanocomposites

He Guo et al.

Summary: In this study, non-thermal plasma coupled with graphene-TiO2-Fe3O4 nanocomposites was used to promote the degradation of oxytetracycline in water. By optimizing parameters such as doping amount, catalyst dosage, peak voltage, air flow rate, and pH value, a high removal efficiency of oxytetracycline was achieved. Various analytical techniques were employed to explore the degradation process and reactive molecular dynamical simulation showed good agreement with experimental observations, providing insight into the reaction mechanisms.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Materials Science, Multidisciplinary

The structure and optical properties of PVA-BaTiO3 nanocomposite films

T. S. Soliman et al.

Summary: This study aimed to synthesize BaTiO3 nanocrystalline particles using the tartrate precursor process, and then prepare nanocomposite films with PVA. Analysis using XRD and FTIR showed complex interactions between BaTiO3 nanoparticles and the PVA matrix. As the concentration of BaTiO3 nanoparticles in the PVA matrix increased, the optical band gap decreased while the Urbach energy increased.

OPTICAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Photocatalytic activity of tetracycline hydrochloride in mariculture wastewater degraded by CuO/Bi2O3 under visible light

Wanting Zhu et al.

Summary: CuO/Bi2O3 photocatalysts prepared by coprecipitation exhibit excellent photocatalytic performance, showing higher catalytic reaction interface and efficiency compared to pure Bi2O3. Through single-factor experiments and orthogonal experiments, optimal conditions for the efficient degradation of tetracycline hydrochloride were determined.

SEPARATION SCIENCE AND TECHNOLOGY (2021)

Article Chemistry, Physical

XPS characterization of cobalt impregnated SiO2 and γ-Al2O3

Jhonn Canon et al.

Summary: The study investigates the impregnation of SiO2 and gamma-Al2O3 with varying amounts of cobalt, with XPS analysis revealing significant changes in the surface properties of the support materials. The results indicate that the choice of support material plays a crucial role in tuning the chemical characteristics of cobalt in cobalt-based catalysts.

SURFACE AND INTERFACE ANALYSIS (2021)

Article Engineering, Electrical & Electronic

Improvement in dielectric properties of the three-phase GN-BaTiO3-PEK nanocomposites with and without silane coupling agent

R. K. Goyal et al.

Summary: In this study, graphite nanoplatelets-barium titanate-polyetherketone nanocomposites were successfully fabricated, showing good dielectric properties and thermal stability.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Article Chemistry, Physical

Piezoelectric composite of BaTiO3-coated SnO2 microsphere: Li-ion battery anode with enhanced electrochemical performance based on accelerated Li+ mobility

Dohyeong Seok et al.

Summary: A BaTiO3-coated SnO2 microsphere composite with high porosity was developed as an anode for high-performance Li-ion batteries, exhibiting improved Li+ ion mobility and electrochemical performance due to the synergistic effect of locally polarized piezoelectric fields and high porosity. The composite anode showed much better rate performance and cycle stability compared to control anodes.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Materials Science, Multidisciplinary

Photocatalytic purification of simulated dye wastewater in different pH environments by using BaTiO3/Bi2WO6 heterojunction photocatalysts

Yanping Wang et al.

Summary: The study investigated the photocatalytic degradation process of mixture dye solutions in different pH environments using novel BaTiO3/Bi2WO6 (BTO/BWO) heterojunction composites. The 15%wt BTO/BWO composite showed the highest photodegradation performance due to efficient separation of photoexcited electron/hole pairs. The photodegradation effect was found to be influenced by acidic-alkaline environments, and a competitive photodegradation phenomenon between the dyes was observed in mixed solutions.

OPTICAL MATERIALS (2021)

Article Chemistry, Physical

BaTiO3 nanocubes/cuboids with selectively deposited Ag nanoparticles: Efficient piezocatalytic degradation and mechanism

Enzhu Lin et al.

Summary: Using a piezoelectrochemical method, selective deposition of Ag nanoparticles on the positively polar end of BaTiO3 nanocubes/cuboids has been achieved, leading to a significant enhancement in catalytic activity. The study sheds light on the piezocatalytic mechanism, offering an efficient way to improve catalytic performance.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Article Chemistry, Multidisciplinary

Cascade electron transfer in ternary CuO/α-Fe2O3/γ-Al2O3 nanocomposite as an effective visible photocatalyst

Aisha Kanwal et al.

Summary: A highly efficient ternary heterojunction of CuO/alpha-Fe2O3/gamma-Al2O3 was fabricated via a facile and cost effective chemical route. The ternary nanocomposite exhibited superior photocatalytic efficacy compared to binary and pure oxides, with the marvelous activity attributed to close contact, strong interfacial hybridization, and efficient charge transfer capacity. The electrochemical studies supported the high photo activity of the ternary nanocomposite, making it a promising candidate for efficient organic dye removal from wastewater.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2021)

Article Engineering, Chemical

Facile synthesis of BaMoO4 and BaMoO4/BaWO4 heterostructures with type-I band arrangement and enhanced photoluminescence properties

Yue Wang et al.

Summary: A series of BaMoO4 and BaMoO4/BaWO4 phosphors were successfully prepared via a polyacrylamide gel method and low temperature calcination technology. The prepared products exhibit high photoluminescent properties and photocatalytic activities, making them potential candidates for applications in various devices.

ADVANCED POWDER TECHNOLOGY (2021)

Article Chemistry, Physical

Investigation of surface interaction in rGO-CdS photocatalyst for hydrogen production: An insight from XPS studies

Dan Bahadur Pal et al.

Summary: Formation of heterojunction in supported-photocatalyst is crucial for photocatalysis of hydrogen production. Detailed analysis reveals surface interaction between rGO and CdS, explaining charge transfer phenomena through heterojunction. The high conductivity of rGO facilitates electron transmission, leading to superior activity of CdS/rGO catalyst.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Engineering, Electrical & Electronic

Synchrotron X-ray absorption fine structure study and dielectric performance of Li0.5Fe2.5O4/BaTiO3 multiferroic

N. G. Imam et al.

Summary: Multiferroic nanocomposites were synthesized and analyzed through XRD, FTIR, and XANES techniques to study their average crystal, chemical, and electronic/local structural characteristics. The presence of distinct constituent phases, the trivalent character of Fe ions, and the influence of BTO weight fraction on dielectric properties were observed. The dielectric parameters showed variations with temperature and frequency, with a remarkable reduction in epsilon and sigma(ac) without relaxation.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Article Materials Science, Multidisciplinary

Piezocatalytic degradation of methylene blue, tetrabromobisphenol A and tetracycline hydrochloride using Bi4Ti3O12 with different morphologies

Tingting Cheng et al.

Summary: This paper reports the piezocatalytic application of morphologically different Bi4Ti3O12 nanostructures for the degradation of various environmental pollutants. The synthesized Bi4Ti3O12 samples showed pronounced piezocatalytic degradation of pollutants, with the microplates exhibiting the highest performance. The study also investigated the effects of different parameters on the piezocatalytic degradation of pollutants.

MATERIALS RESEARCH BULLETIN (2021)

Article Materials Science, Multidisciplinary

Microstructure, optical, photoluminescence properties and the intrinsic mechanism of photoluminescence and photocatalysis for the BaTiO3, BaTiO3/TiO2 and BaTiO3/TiO2/CeO2 smart composites

Shifa Wang et al.

Summary: The BaTiO3/TiO2/CeO2 smart composites were synthesized by hydrothermal method, exhibiting distinct optical properties and photocatalytic activities. The inclusion of CeO2 in the composites significantly impacted the photoluminescence and photocatalytic performance, with the BaTiO3/(15 wt%) TiO2/(15 wt%) CeO2 smart composites demonstrating the highest photocatalytic activity for methylene blue degradation under UV light.

OPTICAL MATERIALS (2021)

Article Multidisciplinary Sciences

The efficiency of nano-TiO2 and γ-Al2O3 in copper removal from aqueous solution by characterization and adsorption study

Fatemeh Ezati et al.

Summary: The study examines the efficiency of TiO2 and gamma-Al2O3 nanoadsorbents for removing Cu(II) from aqueous solutions. It demonstrates that adsorption is the main mechanism for Cu(II) removal, with physical adsorption onto nanoparticle surfaces. TiO2 has the highest monolayer adsorption capacity at high pH values, serving as an efficient and cost-effective nanomaterial for remediation of Cu(II) polluted water.

SCIENTIFIC REPORTS (2021)

Article Materials Science, Multidisciplinary

Visible-light-responsive Al2O3 powder: Photocatalytic study

Aleksandra Zarubica et al.

OPTICAL MATERIALS (2020)

Article Nanoscience & Nanotechnology

Binary Zn-Doped SnO2/Al2O3 Nanotube Composites for Visible-Light-Driven Photocatalytic Degradation of Basic Blue 41

Abbas Sadeghzadeh-Attar

ACS APPLIED NANO MATERIALS (2020)

Review Microbiology

Antibiotic Pollution in the Environment: From Microbial Ecology to Public Policy

Susanne A. Kraemer et al.

MICROORGANISMS (2019)

Article Nanoscience & Nanotechnology

Charge Coupling Enhanced Photocatalytic Activity of BaTiO3/MoO3 Heterostructures

Kevin V. Alex et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Physical

Direct evidence of the photocatalytic generation of reactive oxygen species (ROS) in a Bi2W2O9 layered-structure

S. Obregon et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2017)

Article Biochemistry & Molecular Biology

In vitro anticancer potential of BaCO3 nanoparticles synthesized via green route

P. C. Nagajyothi et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY B-BIOLOGY (2016)

Article Materials Science, Multidisciplinary

Study on effect of cubic- and tetragonal phased BaTiO3 on the electrical and thermal properties of polymeric nanocomposites

A. A. Thanki et al.

MATERIALS CHEMISTRY AND PHYSICS (2016)

Editorial Material Nanoscience & Nanotechnology

Best Practices for Reporting on Heterogeneous Photocatalysis

Jillian M. Buriak et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Article Materials Science, Ceramics

Synthesis and Photoluminescence of γ-Al2O3 and C-doped γ-Al2O3 Powders

S. F. Wang et al.

TRANSACTIONS OF THE INDIAN CERAMIC SOCIETY (2014)

Article Engineering, Environmental

Kinetic study of Cu(II) adsorption on nanosized BaTiO3 and SrTiO3 photocatalysts

Yen-Hua Chen et al.

JOURNAL OF HAZARDOUS MATERIALS (2011)

Article Public, Environmental & Occupational Health

Aquaculture: Environmental, toxicological, and health issues

David W. Cole et al.

INTERNATIONAL JOURNAL OF HYGIENE AND ENVIRONMENTAL HEALTH (2009)

Review Chemistry, Physical

Mechanistic insight into the TiO2 photocatalytic reactions:: Design of new photocatalysts

Takashi Tachikawa et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2007)

Article Chemistry, Physical

XPS study of oxidation of rhenium metal on γ-Al2O3 support

J Okal et al.

JOURNAL OF CATALYSIS (2004)