☆ 4.7 Article

Experimental investigation on damage features of stiffened cabin structures subjected to internal blast loading

OCEAN ENGINEERING (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Equivalent scaling method on the dynamic response of box-shaped structures under internal blast

Shujian Yao et al.

Summary: Scaled-down experiments are commonly used to study the dynamic response and damage characteristics of full-scale prototypes. However, the usual scaling laws do not apply to structures under dynamic loads due to size effects and strain rate sensitivity. This study proposes a new procedure to equivalent scale the dynamic response of steel box structures subjected to internal blast loading and verifies its effectiveness through field tests and numerical simulations.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2022)

Add to Collection

Article Engineering, Mechanical

Identifying the high-frequency response of a piezoelectric pressure measurement system using a shock tube primary method

A. Svete et al.

Summary: This paper proposes a method to identify the frequency response function of a pressure measurement system in the high-frequency range using a pressure step signal generated in a shock tube as the reference input signal, aiming to improve the accuracy of time-varying pressure measurements.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Civil

Investigation on similarity laws of cabin structure for the material distortion correction under internal blast loading

Yezhi Qin et al.

Summary: This study utilizes the best approximation method to correct the thickness scale factor of scale model structures in order to achieve similarity with the prototype structure. Experimental and numerical results demonstrate that the proposed method accurately predicts the response of structures with different materials and thicknesses.

THIN-WALLED STRUCTURES (2022)

Add to Collection

Article Engineering, Mechanical

Fast prediction method of failure modes for steel box structures under internal blast loading

Shujian Yao et al.

Summary: In this study, the failure modes of steel box structures under internal blast loading were observed, summarized, and validated through experiments and numerical studies. A fast prediction method for failure modes was proposed based on dimensional analyses and numerous numerical simulations considering various factors. Regular distributions of different failure modes were observed on failure modes maps, and empirical equations were proposed for fast prediction. The proposed empirical equation and failure mode map were verified by experimental results.

ENGINEERING FAILURE ANALYSIS (2021)

Add to Collection

Article Automation & Control Systems

An improved low-frequency noise reduction method in shock wave pressure measurement based on mode classification and recursion extraction

Zhenjian Yao et al.

Summary: The study proposes an improved recursive empirical mode decomposition method for filtering low-frequency noise in shock wave pressure measurements, and uses mode classification and adaptive technology to achieve denoising. The effectiveness of the method is verified through simulations and real experiments, demonstrating its superiority in noise elimination and signal integrity maintenance.

ISA TRANSACTIONS (2021)

Add to Collection

Article Engineering, Marine

Study on the similarity methods for the assessment of ultimate strength of stiffened panels under axial load based on tests and numerical simulations

Ming Cai Xu et al.

Summary: The paper introduces a partial similarity method for designing testing models for stiffened panels, by considering different principal parameters combinations to achieve close results between full and small scale models for various collapse modes.

OCEAN ENGINEERING (2021)

Add to Collection

Article Engineering, Mechanical

Experimental and numerical studies on dynamic behavior of reinforced UHPC panel under medium-range explosions

Q. Su et al.

Summary: This study investigates the blast-resistant behavior of one-way simply-supported reinforced ultra-high performance concrete (UHPC) panels through field tests and numerical simulations. The superiority of UHPC as a blast-resistant material was quantitatively proved, and model parameters were calibrated for evaluation and design of UHPC structures under blast loadings. The study provides valuable data and insights for the development of blast-resistant structures using UHPC.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2021)

Add to Collection

Article Engineering, Marine

Experimental and numerical analysis of ultimate compressive strength of long-span stiffened panels

Bin Liu et al.

Summary: This study conducted experimental and finite element analysis on the ultimate compressive strength of long-span stiffened panels subjected to combined loads, showing that in-tension pillars only have a slight effect on strength and validating the numerical results of simulations by the ANSYS solver.

OCEAN ENGINEERING (2021)

Add to Collection

Article Engineering, Marine

Dynamic response of stiffened plate under internal blast: Experimental and numerical investigation

Ying Li et al.

Summary: This paper investigated the dynamic response of stiffened plates under internal blast loading. The study found that the deflection of plates decreased and then increased with an increase in stand-off distance. Additionally, despite increasing deformation resistance, stiffeners tended to reduce the damage tolerance of the plates.

MARINE STRUCTURES (2021)

Add to Collection

Article Engineering, Marine

Development of simplified method for prediction of structural response of stiffened plates under explosion loads

Dac Dung Truong et al.

Summary: Marine structures are vulnerable to accidental and environmental loadings, with explosions causing impulsive pressure loading being a particular concern for serious casualties, property losses, and marine pollution. This study introduces a practical and robust method for damage assessment of marine structures subjected to explosion loads using a SDOF system and numerical simulations. Validated numerical models allowed for a rigorous parametric study and derivation of accurate formulations for predicting structural response to explosion loads.

MARINE STRUCTURES (2021)

Add to Collection

Review Engineering, Civil

Blast responses of steel stiffened panels subjected to plane shock waves

Li Ke et al.

Summary: Experimental and numerical studies were conducted to investigate the blast responses of a stiffened panel under plane shock waves, showing different antiknock performances in various directions under the action of the stiffener. The effect of peak pressure magnitude and shock wave type on the response of the stiffened panel was also discussed, with good agreement between numerical and experimental results.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Influence of standoff distance on the deformation of square steel plates subjected to internal blast loadings

Ye Yuan et al.

Summary: This study combines experimental and numerical approaches to investigate the influence of standoff distance on large inelastic deformation of square steel plates under fully-confined internal blast loading. The results show that increasing standoff distance leads to a monotonic increase in permanent central displacement, contradictory to free-air blast scenarios. Numerical predictions reveal complex pressure wave interactions and saturated impulse effects contributing to this phenomenon.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Marine

Nonlinear dynamic response of blast-loaded stiffened plates considering the strain rate sensitivity

Ying Peng et al.

MARINE STRUCTURES (2020)

Add to Collection

Article Engineering, Mechanical

Dynamic analysis of a stiffened composite plate under blast load: A new model and experimental validation

Demet Balkan et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)

Add to Collection

Article Engineering, Mechanical

Influence of venting on the response of scaled aircraft luggage containers subjected to internal blast loading

G. S. Langdon et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)

Add to Collection

Article Engineering, Civil

Experimental and numerical studies on the dynamic response of stiffened plates under confined blast loads

Nan Zhao et al.

THIN-WALLED STRUCTURES (2020)

Add to Collection

Article Engineering, Mechanical

Low-pass-filter-based shock response spectrum and the evaluation method of transmissibility between equipment and sensitive components interfaces

Yinzhong Yan et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Engineering, Environmental

TNT equivalency in an internal explosion event

Idan E. Edri et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Add to Collection

Article Engineering, Mechanical

On the internal blast loading of submerged floating tunnels in concrete with circular and rectangular cross-sections

Martin Kristoffersen et al.

ENGINEERING FAILURE ANALYSIS (2019)

Add to Collection

Article Engineering, Mechanical

Experimental study on the combined damage of liquid cabin structure subjected to charge explosion with preset fragments

Jian Jin et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

Add to Collection

Article Engineering, Mechanical

An experimental study on the mitigation effects of fine water mist on confined-blast loading and dynamic response of steel plates

Xiangshao Kong et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

Add to Collection

Article Engineering, Mechanical

Experimental and numerical studies on the dynamic response of steel plates subjected to confined blast loading

Cheng Zheng et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)

Add to Collection

Article Engineering, Mechanical

Experimental and numerical studies on the failure modes of steel cabin structure subjected to internal blast loading

Shujian Yao et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)

Add to Collection

Article Engineering, Mechanical

A combined experimental and numerical investigation on the scaling laws for steel box structures subjected to internal blast loading

Shujian Yao et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Shock Response Analysis of Blast Hardened Bulkhead in Partial Chamber Model under Internal Blast

Sang-Gab Lee et al.

PLASTICITY AND IMPACT MECHANICS (2017)

Add to Collection

Article Engineering, Mechanical

The elastic-plastic dynamic response of stiffened plates under confined blast load

Cheng Zheng et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)

Add to Collection

Article Engineering, Mechanical

Analysis of the structural response and failure of containers subjected to internal blast loading

Vanessa Pickerd et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)

Add to Collection

Article Engineering, Mechanical

Dimensionless number for dynamic response analysis of box-shaped structures under internal blast loading

Shujian Yao et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)

Add to Collection

Article Engineering, Mechanical

Experimental and numerical investigation on a multi-layer protective structure under the synergistic effect of blast and fragment loadings

Xiang-shao Kong et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2014)

Add to Collection

Article Engineering, Mechanical

The analysis and simulation of welded stiffener plates subjected to localised blast loading

D. Bonorchis et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A LabVIEW environment to compensate temperature-driven fluctuations in the signal from continuously running spring gravimeters

Bruno Ando et al.

COMPUTERS & GEOSCIENCES (2009)

Add to Collection

Article Engineering, Mechanical

The effect of welded boundaries on the response of rectangular hot-rolled mild steel plates subjected to localised blast loading

D. Bonorchis et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2007)

Add to Collection

Article Engineering, Civil

The effect of stand-off distance on the failure of fully clamped circular mild steel plates subjected to blast loads

N. Jacob et al.

ENGINEERING STRUCTURES (2007)

Add to Collection

Article Engineering, Mechanical

Experimental and numerical studies on the response of quadrangular stiffened plates. Part I: Subjected to uniform blast load

SCK Yuen et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2005)

Add to Collection

Article Engineering, Mechanical

Experimental and numerical studies on the response of quadrangular stiffened plates. Part II: localised blast loading

GS Langdon et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2005)

Add to Collection

Article Engineering, Mechanical

Scaling aspects of quadrangular plates subjected to localised blast loads - experiments and predictions

N Jacob et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.