Related references
Note: Only part of the references are listed.Quasi-brittle porous material: Simulated effect of stochastic air void structure on compressive strength
Anna-Leena Erkkila et al.
CEMENT AND CONCRETE RESEARCH (2021)
Biochar admixtured lightweight, porous and tougher cement mortars: Mechanical, durability and micro computed tomography analysis
Sai Praneeth et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2021)
Experimental study on mechanical property and microstructure of cement mortar reinforced with elaborately recycled GFRP fiber
Boyu Zhou et al.
CEMENT & CONCRETE COMPOSITES (2021)
The effects of nanosilica on the fresh and hardened properties of 3D printable mortars
Pawel Sikora et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Multiscale X-ray tomography of cementitious materials: A review
Sebastien Brisard et al.
CEMENT AND CONCRETE RESEARCH (2020)
The influence of dimension and content of natural organic fibrous materials on the multi-performance of cement-based composites: A statistical approach
Marco Pedroso et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effect of temperature rise on the microstructure of cementitious materials: A study through X-ray computed microtomography (μ-CT)
G. P. Alves et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Physical, mechanical, and microstructural characterisation of an innovative thermal insulating render incorporating silica aerogel
M. Pedroso et al.
ENERGY AND BUILDINGS (2020)
Using X-ray computed tomography to investigate mortar subjected to freeze-thaw cycles
Ghazal Sokhansefat et al.
CEMENT & CONCRETE COMPOSITES (2020)
Utilization of municipal sewage sludge and waste glass powder in production of lightweight aggregates
Xiangguo Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Influence of flexible fibers on the yield stress of fresh cement pastes and mortars
Fariza Sultangaliyeva et al.
CEMENT AND CONCRETE RESEARCH (2020)
Pore morphology variation under ambient curing of plain and fiber-reinforced high performance mortar at an early age
Jesus Minguez et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Application of non-destructive integrated CT-XRD method to investigate alteration of cementitious materials subjected to high temperature and pure water
Hayato Takahashi et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Visual & quantitative identification of cracking in mortar subjected to loads it using X-ray computed tomography method
Shuxian Hong et al.
CEMENT & CONCRETE COMPOSITES (2019)
Characterisation of pore structure development of alkali-activated slag cement during early hydration using electrical responses
Xiaohong Zhu et al.
CEMENT & CONCRETE COMPOSITES (2018)
Multiple recycled aggregate properties analysed by X-ray microtomography
C. Thomas et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Study on water and chloride transport in cracked mortar using X-ray CT, gravimetric method and natural immersion method
Lin Yang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Use of silica fume and natural volcanic ash as a replacement to Portland cement: Micro and pore structural investigation using NMR, XRD, F'TIR and X-ray microtomography
Kunal Kupwade-Patil et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Pore size distribution of mortars produced with agroindustrial waste
Juliana P. Moretti et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Reduced alkali-silica reaction damage in recycled glass mortar samples with supplementary cementitious materials
Shuaicheng Guo et al.
JOURNAL OF CLEANER PRODUCTION (2018)
X-ray Computed Microtomography technique applied for cementitious materials: A review
Italo Batista da Silva
MICRON (2018)
Irradiated recycled plastic as a concrete additive for improved chemo-mechanical properties and lower carbon footprint
Carolyn E. Schaefer et al.
WASTE MANAGEMENT (2018)
Analysis of stress-induced cracks in concrete and mortar under cyclic uniaxial compression
Man Zhou et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Influence of heating on the dynamic tensile strength of two mortars: Experiments and models
Wei Yao et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)
Elastic modulus damage model of cement mortar under salt freezing circumstance based on X-ray CT scanning
Yue Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Mechanical and durability properties of insulation mortar with rubber powder from waste tires
Okpin Na et al.
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2017)
Quantification of thermally induced damage and its effect on dynamic fracture toughness of two mortars
Wei Yao et al.
ENGINEERING FRACTURE MECHANICS (2017)
X-ray computed tomography for pore-related characterization and simulation of cement mortar matrix
Yan-Shuai Wang et al.
NDT & E INTERNATIONAL (2017)
The influence of microstructure geometry on the scale effect in mechanical behaviour of heterogeneous materials
Adrian Rozanski et al.
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2017)
Microstructural Evolution within the Interphase between Hardening Overlay and Existing Concrete Substrates
Lukasz Sadowski et al.
APPLIED SCIENCES-BASEL (2017)
Rehydration on heat-treated cementitious materials up to 700 °C-coupled transport properties characterization
Yan Pei et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Pore-scale modelling of relative permeability of cementitious materials using X-ray computed microtomography images
Mingzhong Zhang
CEMENT AND CONCRETE RESEARCH (2017)
Thermal degradation of dynamic compressive strength for two mortars
Wei Yao et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Fiber reinforced mortar affected by alkali-silica reaction: synchrotron microtomography
Daniel Hernandez-Cruz et al.
CEMENT & CONCRETE COMPOSITES (2016)
X-ray computed microtomography to study autogenous healing of cementitious materials promoted by superabsorbent polymers
D. Snoeck et al.
CEMENT & CONCRETE COMPOSITES (2016)
The influence of microencapsulated phase change material (PCM) characteristics on the microstructure and strength of cementitious composites: Experiments and finite element simulations
Matthew Aguayo et al.
CEMENT & CONCRETE COMPOSITES (2016)
Effect of elevated temperature on alkali-activated geopolymeric binders compared to portland cement-based binders
O. G. Rivera et al.
CEMENT AND CONCRETE RESEARCH (2016)
Homogeneous and heterogeneous rheology and flow-induced microstructures of a fresh fiber-reinforced mortar
F. Chalencon et al.
CEMENT AND CONCRETE RESEARCH (2016)
Micromechanical modelling of deformation and fracture of hydrating cement paste using X-ray computed tomography characterisation
Mingzhong Zhang et al.
COMPOSITES PART B-ENGINEERING (2016)
Monitoring of autogenous crack healing in cementitious materials by the nonlinear modulation of ultrasonic coda waves, 3D microscopy and X-ray microtomography
Benoit Hilloulin et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effects of chloride ions on carbonation rate of hardened cement paste by X-ray CT techniques
Jun-zhe Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Utilization of waste glass powder in the production of cement and concrete
Ali A. Aliabdo et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Revisiting Critical Flaws in Cement-Based Composites
Eric N. Landis et al.
JOURNAL OF NANOMECHANICS AND MICROMECHANICS (2016)
X-ray microtomography (μ-CT) to analyze the pore structure of a Portland cement composite based on the selection of different regions of interest
Elen E. Bernardes et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
X-ray computed tomography proof of bacterial-based self-healing in concrete
Jianyun Wang et al.
CEMENT & CONCRETE COMPOSITES (2014)
3D spatial distribution of the calcium carbonate caused by carbonation of cement paste
Keshu Wan et al.
CEMENT & CONCRETE COMPOSITES (2014)
Thermal properties of the composite material clay/granular cork
Soumia Mounir et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
A study on the effect of nano silica on compressive strength of high volume fly ash mortars and concretes
F. U. A. Shaikh et al.
MATERIALS & DESIGN (2014)
Use of waste glass as sand in mortar: Part I - Fresh, mechanical and durability properties
Kiang Hwee Tan et al.
CEMENT & CONCRETE COMPOSITES (2013)
Study on 3D spatial distribution of steel fibers in fiber reinforced cementitious composites through micro-CT technique
Jiaping Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Characterization of steel corrosion in mortar by various electrochemical and physical techniques
Ales Cesen et al.
CORROSION SCIENCE (2013)
Application of X-Ray CT to Study Diffusivity in Cracked Concrete Through the Observation of Tracer Transport
Ivan Sandi Darma et al.
JOURNAL OF ADVANCED CONCRETE TECHNOLOGY (2013)
X-ray microtomography of the carbonation front shape evolution of cement mortar and modeling of accelerated carbonation reaction
Han Jiande et al.
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2013)
X-ray microtomography (μ-CT) to evaluate microstructure of mortars containing low density additions
Marcos Lanzon et al.
CEMENT & CONCRETE COMPOSITES (2012)
X-ray microtomography shows pore structure and tortuosity in alkali-activated binders
John L. Provis et al.
CEMENT AND CONCRETE RESEARCH (2012)
Multi-criteria analysis of the mechanism of degradation of Portland cement based mortars exposed to external sulphate attack
R. El-Hachem et al.
CEMENT AND CONCRETE RESEARCH (2012)
Computational investigation on mass diffusivity in Portland cement paste based on X-ray computed microtomography (μCT) image
Mingzhong Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
In situ dynamic XCT imaging of the microstructure evolution of cement mortar in accelerated carbonation reaction
Jiande Han et al.
MAGAZINE OF CONCRETE RESEARCH (2012)
Estimation of local stresses and elastic properties of a mortar sample by FFT computation of fields on a 3D image
J. Escoda et al.
CEMENT AND CONCRETE RESEARCH (2011)
3D characterization of sandstone by means of X-ray computed tomography
V. Cnudde et al.
GEOSPHERE (2011)
Synchrotron X-ray computed microtomography investigation of a mortar affected by alkali-silica reaction: a quantitative characterization of its microstructural features
Marco Voltolini et al.
JOURNAL OF MATERIALS SCIENCE (2011)
X-ray diffraction microtomography (XRD-CT), a novel tool for non-invasive mapping of phase development in cement materials
G. Artioli et al.
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2010)
About microcracking due to leaching in cementitious composites: X-ray microtomography description and numerical approach
Thomas Rougelot et al.
CEMENT AND CONCRETE RESEARCH (2010)
Some aspects of cellulose ethers influence on water transport and porous structure of cement-based materials
J. Pourchez et al.
CEMENT AND CONCRETE RESEARCH (2010)
Application of synchrotron microtomography for pore structure characterization of deteriorated cementitious materials due to leaching
T. Sugiyama et al.
CEMENT AND CONCRETE RESEARCH (2010)
X-Ray Microtomography of Mortars Exposed to Freezing-Thawing Action
Michael Angelo B. Promentilla et al.
JOURNAL OF ADVANCED CONCRETE TECHNOLOGY (2010)
Cork agglomerates as an ideal core material in lightweight structures
Osvaldo Castro et al.
MATERIALS & DESIGN (2010)
X-ray microtomography
Eric N. Landis et al.
MATERIALS CHARACTERIZATION (2010)
Lubricated compression and X-ray microtomography to analyse the rheology of a fibre-reinforced mortar
F. Chalencon et al.
RHEOLOGICA ACTA (2010)
Quantification of tortuosity in hardened cement pastes using synchrotron-based X-ray computed microtomography
M. A. B. Promentilla et al.
CEMENT AND CONCRETE RESEARCH (2009)
Characterizing the 3D pore structure of hardened cement paste with synchrotron microtomography
Michael Angelo B. Promentilla et al.
JOURNAL OF ADVANCED CONCRETE TECHNOLOGY (2008)
Microstructural features of a mortar as seen by computed microtomography
Sidney Diamond et al.
MATERIALS AND STRUCTURES (2007)
Damage evolution analysis in mortar, during compressive loading using acoustic emission and X-ray tomography: Effects of the sand/cement ratio
H. Elaqra et al.
CEMENT AND CONCRETE RESEARCH (2007)
3D experimental investigation of the microstructure of cement pastes using synchrotron X-ray microtomography (μCT)
E. Gallucci et al.
CEMENT AND CONCRETE RESEARCH (2007)
X-ray microtomography: Application to microstructure analysis of a cementitious material during leaching process
N Burlion et al.
CEMENT AND CONCRETE RESEARCH (2006)
Sulfate attack monitored by microCT and EDXRD: Influence of cement type, water-to-cement ratio, and aggregate
NN Naik et al.
CEMENT AND CONCRETE RESEARCH (2006)
Development of waste tire modified concrete
GQ Li et al.
CEMENT AND CONCRETE RESEARCH (2004)
Microstructure and fracture in three dimensions
EN Landis et al.
ENGINEERING FRACTURE MECHANICS (2003)
Acquisition, optimization and interpretation of X-ray computed tomographic imagery: applications to the geosciences
RA Ketcham et al.
COMPUTERS & GEOSCIENCES (2001)
Three-dimensional work of fracture for mortar in compression
EN Landis et al.
ENGINEERING FRACTURE MECHANICS (2000)
Share Paper
