☆ 4.5 Article

Rapid assessment of slope deformation in 3D point cloud considering feature-based simplification and deformed area extraction

MEASUREMENT SCIENCE AND TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Geosciences, Multidisciplinary

Quantitative assessment of the complexity of talus slope morphodynamics using multi-temporal data from terrestrial laser scanning (Tatra Mts., Poland)

Zofia Raczkowska et al.

Summary: From 2011 to 2019, high-mountain talus slopes in the Tatra Mts. were observed using terrestrial laser scanning (TLS) measurements, showing that changes in talus slopes are essentially effects of debris flows. Significant differences in spatiotemporal changes between two adjacent talus cones were found to be related to their catchment lithologies. The spatial extent of talus slope change during the period of TLS monitoring is confined to debris flows tracks.

CATENA (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Monitoring-data mechanism-driven dynamic evaluation method for slope safety

Kai Dong et al.

Summary: In this study, a dynamic evaluation method for slope safety based on displacement monitoring data was proposed, taking into consideration the creep characteristics of the slope. By separating the aging component and establishing a surrogate model, the quantitative evaluation of slope safety was achieved, providing an effective guarantee for slope safety control.

COMPUTERS AND GEOTECHNICS (2022)

Add to Collection

Review Environmental Sciences

Review on the Geophysical and UAV-Based Methods Applied to Landslides

Yawar Hussain et al.

Summary: Landslides are geomorphological processes that can change the properties of materials over time, and their variations can be detected and studied using various geophysical methods. This paper reviews common geophysical methods and proposes an integrated approach to improve landslide studies. It also explores the application of UAV photogrammetry in landslide investigation and discusses the synergy between UAV and geophysical monitoring.

REMOTE SENSING (2022)

Add to Collection

Review Engineering, Electrical & Electronic

Review of Landslide Monitoring Techniques With IoT Integration Opportunities

Hemalatha Thirugnanam et al.

Summary: This article surveys major landslide monitoring techniques adopted worldwide and explores the challenges and opportunities of integrating IoT into these techniques. It provides an overview of landslide monitoring and classifies the techniques based on landslide type, velocity, monitoring parameters, monitoring phases, and early warning systems.

IEEE JOURNAL OF SELECTED TOPICS IN APPLIED EARTH OBSERVATIONS AND REMOTE SENSING (2022)

Add to Collection

Article Engineering, Multidisciplinary

Characterisation of a multi-view fringe projection system based on the stereo matching of rectified phase maps

A. Shaheen et al.

Summary: Multi-view fringe projection systems offer a solution to limitations of single camera-projector systems, without the need for projector characterization. The method uses rectified phase maps to determine correspondences and triangulate phase values for 3D reconstruction of objects, eliminating the need for registration of point clouds from multiple perspectives.

MEASUREMENT SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Engineering, Multidisciplinary

A novel point cloud simplification method with integration of multiple-feature fusion and density uniformity

Nuo Chen et al.

Summary: This method presents a novel point cloud simplification algorithm, accurately reconstructing 3D point clouds by integrating multiple features and estimating point cloud density, thus preserving more edge details and avoiding holes in the final reconstruction.

MEASUREMENT SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Geography, Physical

Multi-directional change detection between point clouds

Jack G. Williams et al.

Summary: The study introduces a new method for change detection, providing more accurate measurements of rockfall and movement in geological scenes. By deriving Dominant Movement Directions (DMD), the method avoids the influence of local surface normals in measuring changes. The new approach has been successful in three LiDAR-derived cases, achieving more accurate measurements in comparison.

ISPRS JOURNAL OF PHOTOGRAMMETRY AND REMOTE SENSING (2021)

Add to Collection

Article Chemistry, Analytical

Displacement Estimation Error in Laser Scanning Monitoring of Retaining Structures Considering Roughness

Hyungjoon Seo et al.

Summary: Point clouds obtained by laser scanning of various retaining structures were analyzed for displacement calculations based on local roughness and global curvature. Different methods (C2C, C2M, M3C2) were used to calculate displacement and analyze errors, with M3C2 method showing the lowest error and presenting optimized parameters for displacement analysis.

SENSORS (2021)

Add to Collection

Article Multidisciplinary Sciences

A New Simplification Algorithm for Scattered Point Clouds with Feature Preservation

Miao Gong et al.

Summary: The paper proposes a new simplification algorithm for scattered point clouds, which reduces data while retaining data features by constructing the Delaunay neighborhood, extracting edge points, using the moving least-square method, and identifying potential feature points based on the discrete gradient idea. This method is effective in models with different curvatures and can avoid the hole phenomenon in simplification process. Further improvement in robustness and anti-noise ability can be achieved by extending the neighborhood of the point cloud to multiple levels and finding a balance between simplification speed and accuracy.

SYMMETRY-BASEL (2021)

Add to Collection

Review Construction & Building Technology

Planning for terrestrial laser scanning in construction: A review

Afrooz Aryan et al.

Summary: Terrestrial Laser Scanning (TLS) is an efficient method for collecting point clouds with various applications in the AEC domain. Ensuring data quality and time efficiency in data collection is crucial, which can be achieved through prior planning optimization process known as Planning for Scanning (P4S). Past research has focused on categorizing point cloud data quality criteria and addressing the optimization problem in P4S by considering inputs, constraints, and algorithms utilized.

AUTOMATION IN CONSTRUCTION (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Processing of mobile laser scanning data for large-scale deformation monitoring of anchored retaining structures along highways

Slaven Kalenjuk et al.

Summary: This paper discusses the demand for cost-efficient deformation monitoring of anchored retaining structures along public roads by processing laser scans of a motor-vehicle-based mobile mapping system with a high degree of automation. Despite the need to correct for positioning errors to obtain accurate results, the high data redundancy of road patches and line markings for alignment allows for scalable and repeatable computations, achieving comparable accuracies to traditional surveying methods even at high speeds.

COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

3D Roughness Measurement of Failure Surface in CFA Pile Samples Using Three-Dimensional Laser Scanning

Hyungjoon Seo

Summary: This paper investigates the impact of soil collapse at the bottom of CFA piles on bearing capacity, and proposes a method to compare roughness features of pile samples with different material mixtures using three-dimensional laser scanning and point cloud analysis techniques.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Computer Science, Information Systems

A Comparison Method for 3D Laser Point Clouds in Displacement Change Detection for Arch Dams

Yijing Li et al.

Summary: This study presents a displacement change detection method for arch dams based on a two-step point cloud registration and contour model comparison method. By using stable rock as the correspondence element, a two-step registration method from rough to fine is proposed using the iterative closest point algorithm to describe the coordinate unification of the two states' data without control network and target. Then, the contour model fitting the point clouds is used to compare the change in distance between models, improving the accuracy of comparing the two surfaces without being affected by the roughness of the point cloud.

ISPRS INTERNATIONAL JOURNAL OF GEO-INFORMATION (2021)

Add to Collection

Article Geography, Physical

M3C2-EP: Pushing the limits of 3D topographic point cloud change detection by error propagation

Lukas Winiwarter et al.

Summary: The study overcomes limitations in the analysis of 3D point cloud data by calculating uncertainty information for each point, resulting in a less biased estimate of the Level of Detection. This method allows for a more accurate significance threshold for the analysis of geomorphic changes in typically uneven natural surfaces.

ISPRS JOURNAL OF PHOTOGRAMMETRY AND REMOTE SENSING (2021)

Add to Collection

Article Engineering, Geological

Automatic identification of continuous or non-continuous evolution of landslides and quantification of deformations

Marie-Aurelie Chanut et al.

Summary: This paper introduces an automatic tool for studying the evolution of landslides, which uses a new continuous motion indicator to identify motion patterns and calculates displacements and evolution using different methods. The results demonstrate that the method can accurately show the 3D spatial evolution of landslides under different conditions.

LANDSLIDES (2021)

Add to Collection

Article Engineering, Multidisciplinary

Development of a novel Hall element inclinometer for slope displacement monitoring

Huafu Pei et al.

Summary: The study presents a novel inclinometer based on the Hall element sensor for deep-seated slope deformation monitoring, demonstrating stable performance and good measurement precision suitable for geotechnical engineering requirements.

MEASUREMENT (2021)

Add to Collection

Article Environmental Sciences

Systematic Approach for Tunnel Deformation Monitoring with Terrestrial Laser Scanning

Dongfeng Jia et al.

Summary: This study presents a systematic method for analyzing tunnel deformation, including a rapid and high-accuracy point-cloud registration method using a positioning base made in the laboratory and an improved moving least-squares method for reconstructing the tunnel centerline from unorganized point clouds.

REMOTE SENSING (2021)

Add to Collection

Review Geography, Physical

Registration of large-scale terrestrial laser scanner point clouds: A review and benchmark

Zhen Dong et al.

ISPRS JOURNAL OF PHOTOGRAMMETRY AND REMOTE SENSING (2020)

Add to Collection

Review Geochemistry & Geophysics

A Review of Time-Series Interferometric SAR Techniques: A Tutorial for Surface Deformation Analysis

Feiyang Xue et al.

IEEE GEOSCIENCE AND REMOTE SENSING MAGAZINE (2020)

Add to Collection

Article Chemistry, Analytical

Terrain Point Cloud Assisted GB-InSAR Slope and Pavement Deformation Differentiate Method in an Open-Pit Mine

Xiangtian Zheng et al.

SENSORS (2020)

Add to Collection

Article Environmental Sciences

Automated Feature-Based Down-Sampling Approaches for Fine Registration of Irregular Point Clouds

Abdulla Al-Rawabdeh et al.

REMOTE SENSING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Determination of the Stability of High-Steep Slopes by Global Navigation Satellite System (GNSS) Real-Time Monitoring in Long Wall Mining

Xugang Lian et al.

APPLIED SCIENCES-BASEL (2020)

Add to Collection

Article Engineering, Multidisciplinary

A method for the calculation of Detectable Landslide using Terrestrial Laser Scanning data

Xijiang Chen et al.

MEASUREMENT (2020)

Add to Collection

Article Engineering, Electrical & Electronic

A Case Study of Deformation Measurements of Istanbul Land Walls via Terrestrial Laser Scanning

Maryna Batur et al.

IEEE JOURNAL OF SELECTED TOPICS IN APPLIED EARTH OBSERVATIONS AND REMOTE SENSING (2020)

Add to Collection

Article Remote Sensing

F2S3: Robustified determination of 3D displacement vector fields using deep learning

Zan Gojcic et al.

JOURNAL OF APPLIED GEODESY (2020)

Add to Collection

Article Computer Science, Information Systems

Deformation Measurement of Highway Bridge Head Based on Mobile TLS Data

Maohua Liu et al.

IEEE ACCESS (2020)

Add to Collection

Review Engineering, Electrical & Electronic

Optical Fiber-Based Sensing, Measuring, and Implementation Methods for Slope Deformation Monitoring: A Review

Heng Wu et al.

IEEE SENSORS JOURNAL (2019)

Add to Collection

Article Archaeology

Monitoring earthen archaeological heritage using multi-temporal terrestrial laser scanning and surface change detection

Nicola Lercari

JOURNAL OF CULTURAL HERITAGE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Feature-Preserved Point Cloud Simplification Based on Natural Quadric Shape Models

Kun Zhang et al.

APPLIED SCIENCES-BASEL (2019)

Add to Collection

Article Engineering, Geological

Monitoring of displacement evolution during the pre-failure stage of a rock block using ground-based radar interferometry

Hai-bo Li et al.

LANDSLIDES (2019)

Add to Collection

Article Construction & Building Technology

Automatic creation of as-is building information model from single-track railway tunnel point clouds

Yun-Jian Cheng et al.

AUTOMATION IN CONSTRUCTION (2019)

Add to Collection

Article Engineering, Geological

An efficient method of monitoring slow-moving landslides with long-range terrestrial laser scanning: a case study of the Dashu landslide in the Three Gorges Reservoir Region, China

Ronggang Huang et al.

LANDSLIDES (2019)

Add to Collection

Article Computer Science, Artificial Intelligence

Plane detection in 3D point cloud using octree-balanced density down-sampling and iterative adaptive plane extraction

Emad El-Sayed et al.

IET IMAGE PROCESSING (2018)

Add to Collection

Article Geosciences, Multidisciplinary

Comparison of performance of inclinometer casing and TDR technique

S. M. Fatemi Aghda et al.

JOURNAL OF APPLIED GEOPHYSICS (2018)

Add to Collection

Article Engineering, Multidisciplinary

A new measurement approach for deflection monitoring of large-scale bored piles using distributed fiber sensing technology

Dong-sheng Xu et al.

MEASUREMENT (2018)

Add to Collection

Article Computer Science, Software Engineering

Fast Winding Numbers for Soups and Clouds

Gavin Barill et al.

ACM TRANSACTIONS ON GRAPHICS (2018)

Add to Collection

Article Engineering, Environmental

Hazard zoning of trunk highway slope disasters: a case study in northern Shaanxi, China

Huan Zhao et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2018)

Add to Collection

Article Geography, Physical

Reconstruction of former glacier surface topography from archive oblique aerial images

N. G. Midgley et al.

GEOMORPHOLOGY (2017)

Add to Collection

Article Environmental Sciences

New Techniques to Measure Cliff Change from Historical Oblique Aerial Photographs and Structure-from-Motion Photogrammetry

Jonathan A. Warrick et al.

JOURNAL OF COASTAL RESEARCH (2017)

Add to Collection

Article Materials Science, Characterization & Testing

Deformation Tracking in 3D Point Clouds Via Statistical Sampling of Direct Cloud-to-Cloud Distances

Bahman Jafari et al.

JOURNAL OF NONDESTRUCTIVE EVALUATION (2017)

Add to Collection

Review Engineering, Electrical & Electronic

A review of algorithms for filtering the 3D point cloud

Xian-Feng Han et al.

SIGNAL PROCESSING-IMAGE COMMUNICATION (2017)

Add to Collection

Article Geography, Physical

3-D uncertainty-based topographic change detection with structure-from-motion photogrammetry: precision maps for ground control and directly georeferenced surveys

Mike R. James et al.

EARTH SURFACE PROCESSES AND LANDFORMS (2017)

Add to Collection

Article Geography, Physical

Planar-Based Adaptive Down-Sampling of Point Clouds

Yun-Jou Lin et al.

PHOTOGRAMMETRIC ENGINEERING AND REMOTE SENSING (2016)

Add to Collection

Article Optics

Point cloud simplification with preserved edge based on normal vector

Huiyan Han et al.

OPTIK (2015)

Add to Collection

Article Geography, Physical

Discontinuous GBSAR deformation monitoring

Michele Crosetto et al.

ISPRS JOURNAL OF PHOTOGRAMMETRY AND REMOTE SENSING (2014)

Add to Collection

Review Geography, Physical

A review of ground-based SAR interferometry for deformation measurement

O. Monserrat et al.

ISPRS JOURNAL OF PHOTOGRAMMETRY AND REMOTE SENSING (2014)

Add to Collection

Article Chemistry, Analytical

Displacement Parameter Inversion for a Novel Electromagnetic Underground Displacement Sensor

Nanying Shentu et al.

SENSORS (2014)

Add to Collection

Article Computer Science, Software Engineering

Robust Inside-Outside Segmentation using Generalized Winding Numbers

Alec Jacobson et al.

ACM TRANSACTIONS ON GRAPHICS (2013)

Add to Collection

Article Computer Science, Software Engineering

Screened Poisson Surface Reconstruction

Michael Kazhdan et al.

ACM TRANSACTIONS ON GRAPHICS (2013)

Add to Collection

Article Geography, Physical

Accurate 3D comparison of complex topography with terrestrial laser scanner: Application to the Rangitikei canyon (N-Z)

Dimitri Lague et al.

ISPRS JOURNAL OF PHOTOGRAMMETRY AND REMOTE SENSING (2013)

Add to Collection

Article Geography, Physical

Detection of surface change in complex topography using terrestrial laser scanning: application to the Illgraben debris-flow channel

Peter Schuerch et al.

EARTH SURFACE PROCESSES AND LANDFORMS (2011)

Add to Collection

Article Geology

Estimating surface roughness of terrestrial laser scan data using orthogonal distance regression

Ryan M. Pollyea et al.

GEOLOGY (2011)

Add to Collection

Article Engineering, Civil

EFFECTS OF LIDAR DATA REDUCTION AND BREAKLINES ON THE ACCURACY OF DIGITAL ELEVATION MODEL

Xiaoye Liu et al.

SURVEY REVIEW (2011)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Terrestrial Laser Scanning-Based Structural Damage Assessment

Michael J. Olsen et al.

JOURNAL OF COMPUTING IN CIVIL ENGINEERING (2010)

Add to Collection

Review Mining & Mineral Processing

Review of surface mine slope monitoring techniques

Kayode S. Osasan et al.

JOURNAL OF MINING SCIENCE (2010)

Add to Collection

Article Engineering, Environmental

Using close range terrestrial digital photogrammetry for 3-D rock slope modeling and discontinuity mapping in the United States

William C. Haneberg

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2008)

Add to Collection

Article Chemistry, Analytical

A new approach for structural monitoring of large dams with a three-dimensional laser scanner

Diego Gonzalez-Aguilera et al.

SENSORS (2008)

Add to Collection

Article Computer Science, Software Engineering

Surface simplification using a discrete curvature norm

SJ Kim et al.

COMPUTERS & GRAPHICS-UK (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.