Related references
Note: Only part of the references are listed.Space-time isogeometric analysis of car and tire aerodynamics with road contact and tire deformation and rotation
Takashi Kuraishi et al.
COMPUTATIONAL MECHANICS (2022)
Mesh Moving Methods in Flow Computations with the Space–Time and Arbitrary Lagrangian–Eulerian Methods
Kenji Takizawa et al.
Journal of Advanced Engineering and Computation (2022)
Isogeometric large-eddy simulations of turbulent particle-laden flows
Qiming Zhu et al.
MATHEMATICAL MODELS & METHODS IN APPLIED SCIENCES (2022)
Simulating air blast on concrete structures using the volumetric penalty coupling of isogeometric analysis and peridynamics
Shaunak Shende et al.
MATHEMATICAL MODELS & METHODS IN APPLIED SCIENCES (2022)
Fluid-structure interaction modeling with nonmatching interface discretizations for compressible flow problems: Computational framework and validation study
Manoj R. Rajanna et al.
MATHEMATICAL MODELS & METHODS IN APPLIED SCIENCES (2022)
Flow computation with the Space-Time Isogeometric Analysis and higher-order basis functions in time
Yang Liu et al.
MATHEMATICAL MODELS & METHODS IN APPLIED SCIENCES (2022)
Boundary layer mesh resolution in flow computation with the Space-Time Variational Multiscale method and isogeometric discretization
Takashi Kuraishi et al.
MATHEMATICAL MODELS & METHODS IN APPLIED SCIENCES (2022)
Isogeometric variational multiscale modeling of stably stratified flow over complex terrains
Haoyang Cen et al.
MATHEMATICAL MODELS & METHODS IN APPLIED SCIENCES (2022)
Computational flow analysis with boundary layer and contact representation: II. Heart valve flow with leaflet contact
Takuya Terahara et al.
JOURNAL OF MECHANICS (2022)
Computational flow analysis with boundary layer and contact representation: I. Tire aerodynamics with road contact
Takashi Kuraishi et al.
JOURNAL OF MECHANICS (2022)
Gas turbine computational flow and structure analysis with isogeometric discretization and a complex-geometry mesh generation method
Yuri Bazilevs et al.
COMPUTATIONAL MECHANICS (2021)
IGA-PD penalty-based coupling for immersed air-blast fluid-structure interaction: a simple and effective solution for fracture and fragmentation
Masoud Behzadinasab et al.
JOURNAL OF MECHANICS (2021)
Coupling of IGA and peridynamics for air-blast fluid-structure interaction using an immersed approach
Masoud Behzadinasab et al.
FORCES IN MECHANICS (2021)
Element length calculation in B-spline meshes for complex geometries
Yuto Otoguro et al.
COMPUTATIONAL MECHANICS (2020)
Ventricle-valve-aorta flow analysis with the Space-Time Isogeometric Discretization and Topology Change
Takuya Terahara et al.
COMPUTATIONAL MECHANICS (2020)
Heart valve isogeometric sequentially-coupled FSI analysis with the space-time topology change method
Takuya Terahara et al.
COMPUTATIONAL MECHANICS (2020)
A low-distortion mesh moving method based on fiber-reinforced hyperelasticity and optimized zero-stress state
Kenji Takizawa et al.
COMPUTATIONAL MECHANICS (2020)
Variational multiscale modeling with discretely divergence-free subscales
John A. Evans et al.
COMPUTERS & MATHEMATICS WITH APPLICATIONS (2020)
Space-Time Variational Multiscale Isogeometric Analysis of a tsunami-shelter vertical-axis wind turbine
Yuto Otoguro et al.
COMPUTATIONAL MECHANICS (2020)
Element-splitting-invariant local-length-scale calculation in B-Spline meshes for complex geometries
Yuki Ueda et al.
MATHEMATICAL MODELS & METHODS IN APPLIED SCIENCES (2020)
Compressible-flow geometric-porosity modeling and spacecraft parachute computation with isogeometric discretization
Taro Kanai et al.
COMPUTATIONAL MECHANICS (2019)
Turbocharger turbine and exhaust manifold flow computation with the Space-Time Variational Multiscale Method and Isogeometric Analysis
Yuto Otoguro et al.
COMPUTERS & FLUIDS (2019)
Mesh refinement influence and cardiac-cycle flow periodicity in aorta flow analysis with isogeometric discretization
Kenji Takizawa et al.
COMPUTERS & FLUIDS (2019)
Space-time isogeometric flow analysis with built-in Reynolds-equation limit
Takashi Kuraishi et al.
MATHEMATICAL MODELS & METHODS IN APPLIED SCIENCES (2019)
Space-time VMS flow analysis of a turbocharger turbine with isogeometric discretization: computations with time-dependent and steady-inflow representations of the intake/exhaust cycle
Yuto Otoguro et al.
COMPUTATIONAL MECHANICS (2019)
A node-numbering-invariant directional length scale for simplex elements
Kenji Takizawa et al.
MATHEMATICAL MODELS & METHODS IN APPLIED SCIENCES (2019)
Stabilization and discontinuity-capturing parameters for space-time flow computations with finite element and isogeometric discretizations
Kenji Takizawa et al.
COMPUTATIONAL MECHANICS (2018)
Space-time VMS computational flow analysis with isogeometric discretization and a general-purpose NURBS mesh generation method
Yuto Otoguro et al.
COMPUTERS & FLUIDS (2017)
Heart valve flow computation with the integrated Space-Time VMS, Slip Interface, Topology Change and Isogeometric Discretization methods
Kenji Takizawa et al.
COMPUTERS & FLUIDS (2017)
A new formulation for air-blast fluid-structure interaction using an immersed approach. Part I: basic methodology and FEM-based simulations
Y. Bazilevs et al.
COMPUTATIONAL MECHANICS (2017)
A new formulation for air-blast fluid-structure interaction using an immersed approach: part II-coupling of IGA and meshfree discretizations
Y. Bazilevs et al.
COMPUTATIONAL MECHANICS (2017)
Isogeometric divergence-conforming variational multiscale formulation of incompressible turbulent flows
T. M. Van Opstal et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)
Immersogeometric cardiovascular fluid-structure interaction analysis with divergence-conforming B-splines
David Kamensky et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)
Turbocharger flow computations with the Space-Time Isogeometric Analysis (ST-IGA)
Kenji Takizawa et al.
COMPUTERS & FLUIDS (2017)
Space-Time method for flow computations with slip interfaces and topology changes (ST-SI-TC)
Kenji Takizawa et al.
COMPUTERS & FLUIDS (2016)
Space-time VMS computation of wind-turbine rotor and tower aerodynamics
Kenji Takizawa et al.
COMPUTATIONAL MECHANICS (2014)
Space-time interface-tracking with topology change (ST-TC)
Kenji Takizawa et al.
COMPUTATIONAL MECHANICS (2014)
Space-time computation techniques with continuous representation in time (ST-C)
Kenji Takizawa et al.
COMPUTATIONAL MECHANICS (2014)
Isogeometric divergence-conforming B-splines for the unsteady Navier-Stokes equations
John A. Evans et al.
JOURNAL OF COMPUTATIONAL PHYSICS (2013)
ISOGEOMETRIC DIVERGENCE-CONFORMING B-SPLINES FOR THE STEADY NAVIER-STOKES EQUATIONS
John A. Evans et al.
MATHEMATICAL MODELS & METHODS IN APPLIED SCIENCES (2013)
Space-time techniques for computational aerodynamics modeling of flapping wings of an actual locust
Kenji Takizawa et al.
COMPUTATIONAL MECHANICS (2012)
Wind turbine aerodynamics using ALE-VMS: validation and the role of weakly enforced boundary conditions
Ming-Chen Hsu et al.
COMPUTATIONAL MECHANICS (2012)
Space-time computational analysis of bio-inspired flapping-wing aerodynamics of a micro aerial vehicle
Kenji Takizawa et al.
COMPUTATIONAL MECHANICS (2012)
Space-Time Computational Techniques for the Aerodynamics of Flapping Wings
Kenji Takizawa et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2012)
SPACE-TIME FLUID-STRUCTURE INTERACTION METHODS
Kenji Takizawa et al.
MATHEMATICAL MODELS & METHODS IN APPLIED SCIENCES (2012)
Multiscale space-time fluid-structure interaction techniques
Kenji Takizawa et al.
COMPUTATIONAL MECHANICS (2011)
IsoGeometric Analysis: Stable elements for the 2D Stokes equation
A. Buffa et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS (2011)
3D simulation of wind turbine rotors at full scale. Part I: Geometry modeling and aerodynamics
Y. Bazilevs et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS (2011)
3D simulation of wind turbine rotors at full scale. Part II: Fluid-structure interaction modeling with composite blades
Y. Bazilevs et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS (2011)
Isogeometric variational multiscale modeling of wall-bounded turbulent flows with weakly enforced boundary conditions on unstretched meshes
Y. Bazilevs et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2010)
Stabilized Methods for Compressible Flows
Thomas J. R. Hughes et al.
JOURNAL OF SCIENTIFIC COMPUTING (2010)
Isogeometric fluid-structure interaction: theory, algorithms, and computations
Y. Bazilevs et al.
COMPUTATIONAL MECHANICS (2008)
NURBS-based isogeometric analysis for the computation of flows about rotating components
Y. Bazilevs et al.
COMPUTATIONAL MECHANICS (2008)
The role of continuity in residual-based variational multiscale modeling of turbulence
I. Akkerman et al.
COMPUTATIONAL MECHANICS (2008)
Modelling of fluid-structure interactions with the space-time finite elements: Solution techniques
Tayfun E. Tezduyar et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS (2007)
Variational multiscale residual-based turbulence modeling for large eddy simulation of incompressible flows
Y. Bazilevs et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2007)
Weak imposition of Dirichlet boundary conditions in fluid mechanics
Y. Bazilevs et al.
COMPUTERS & FLUIDS (2007)
Patient-specific vascular NURBS modeling for isogeometric analysis of blood flow
Yongjie Zhang et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2007)
Isogeometric fluid-structure interaction analysis with applications to arterial blood flow
Y. Bazilevs et al.
COMPUTATIONAL MECHANICS (2006)
Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement
TJR Hughes et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2005)
Computation of moving boundaries and interfaces and stabilization parameters
TE Tezduyar
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS (2003)
Share Paper
