Mechanisms of the preferential cleavage of Ti2AlNb-based alloy: The influence of grain size and local plasticity

An in-depth understanding on the preferential cleavage of the matrix B2 phase, with an ordered body-centered cubic (BCC) structure, is pivotal to improve the processability of Ti2AlNb-based alloys. This research employed in-situ micro tensile tests, multiscale microstructure characterizations, and crystal plasticity simulations to study the grain-size dependent cleavage of the alloy with a full B2 phase. The material was intentionally prepared with two grain sizes differing by order of magnitude, i.e., the millimeter-level coarse grain (CG) and the micron-level fine grain (FG). The experimental results showed that the cleavage of CGs always occurred on the {100} planes, even when the loading direction was much less favorable for the cleavage of these planes, whereas the cleavage of FGs took place on both {100} and {110} planes. The investigation demonstrated that the plastic deformation takes a critical role in selecting cleavage planes. Full-field crystal plasticity simulations demonstrated that, for the CGs, the plastic deformation associated with cleavage on {100} planes is less than that associated with cleavage on {110} planes, indicating a less plastic deformation-induced blunting effect with cleavage on {100} planes. For the FG material, however, the existence of plentiful grain boundaries (GBs) leads to significantly heterogeneous plastic deformation, local stress distribution deviating from the imposed global stress, and hot spots of stress and strain concentration at GB triple junctions. These local plasticity heterogeneities enable the possibility for cleavage on both the {100} and {110} planes.

Automated summary

This research study utilized in-situ micro tensile tests, multiscale microstructure characterizations, and crystal plasticity simulations to investigate the grain-size dependent cleavage of the B2 phase in Ti2AlNb-based alloys. It was found that the grain size significantly influenced the preferential cleavage behavior of the alloy.