☆ 4.7 Article

Effect of boron on the microstructure and mechanical properties of as-cast and annealed CrFeNi medium-entropy alloys

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

A novel Co-free Al0.75CrFeNi eutectic high entropy alloy with superior mechanical properties

Wenna Jiao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Chemistry, Physical

Molecular dynamics study on the strengthening mechanisms of Cr-Fe-Co-Ni high-entropy alloys based on the generalized stacking fault energy

Asker Jarlov et al.

Summary: The correlation between the generalized stacking fault energy and the strengthening mechanisms of Cr-Fe-Co-Ni high-entropy alloys during uniaxial tensile deformation is investigated. The results show that the increase in Cr and Fe content decreases the generalized stacking fault energy while the Co and Ni content has the opposite effect. A linear correlation is identified between the unstable stacking fault energy and the yield stress. The composition of the alloy plays a crucial role in enhancing the yield strength and the efficiency of strengthening mechanisms.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Chemistry, Physical

Toward excellent tensile properties of nitrogen-doped CoCrFeMnNi high-entropy alloy at room and cryogenic temperatures

Sang Hun Shim et al.

Summary: The addition of nitrogen significantly affects the microstructural evolution and mechanical properties of CoCrFeMnNi alloys, suppressing grain growth and enhancing alloy performance. It results in excellent tensile strength and elongation with substantial strain hardening, showing strong temperature dependence in yield strength likely due to friction stress induced by temperature-dependent obstacles.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Chemistry, Physical

Tuning deformation mechanisms of face-centered-cubic high-entropy alloys via boron doping

Haitao Zhang et al.

Summary: This study demonstrates for the first time the effect of interstitial boron and boron-rich precipitate on the deformation mechanisms of FCC high-entropy alloys. Introducing interstitial boron atoms can transform the dominant deformation mechanism from dislocation slip to deformation twins, while the formation of borides leads to a reversion to dislocation slip.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Refinement strengthening, second phase strengthening and spinodal microstructure-induced strength-ductility trade-off in a high-entropy alloy

Wei Zhang et al.

Summary: This study investigated the mechanical properties and deformation mechanisms of as-cast and cold rolled-annealed high-entropy alloy samples. The cold-rolled and annealed sample showed higher yield strength, ultimate strength, and good ductility compared to the as-cast sample. The RA sample exhibited significant changes in grain size, phase volume fraction, and dislocation walls.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Chemistry, Physical

Bulk nanocrystalline boron-doped VNbMoTaW high entropy alloys with ultrahigh strength, hardness, and resistivity

S. W. Xin et al.

Summary: Bulk nanocrystalline boron-doped high entropy alloys with ultrahigh hardness and strength were fabricated, mainly attributed to solid solution, precipitation, grain boundary, and dislocation strengthening mechanisms. The high resistivity was related to the high volume fractions of grain boundaries and phase interfaces, point defects and dislocations near grain boundaries, and lattice distortions.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Enhancement of strength-ductility balance of heavy Ti and Al alloyed FeCoNiCr high-entropy alloys via boron doping

Yongliang Qi et al.

Summary: By doping extremely little boron into heavy precipitation-hardened high-entropy alloys, the original microstructure can be significantly improved, leading to enhanced tensile ductility and comparable or even better ultimate tensile strength.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Novel Si-added CrCoNi medium entropy alloys achieving the breakthrough of strength-ductility trade-off

H. Chang et al.

Summary: A novel CrCoNiSix MEAs system was designed to enhance strength and ductility by increasing Si content, with the underlying strengthening mechanism involving the reduction of SFE and increase in lattice distortion via Si addition. More concentrated deformation twins were observed in Si-added MEAs, and a nanoscale diffusionless transformation occurred from FCC to HCP phase at room temperature.

MATERIALS & DESIGN (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of temperature on mechanical properties and deformation mechanisms of the equiatomic CrFeNi medium-entropy alloy

Mike Schneider et al.

Summary: Investigations on equiatomic CrFeNi medium-entropy alloy reveal stable face-centered cubic solid solution properties at specific temperatures. Cold-working and recrystallization processes can produce different grain sizes, showing varied mechanical properties and deformation mechanisms influenced by temperature. Analysis of deformation processes at different strains indicates a combination of dislocation glide and twinning mechanisms.

ACTA MATERIALIA (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Evidence of FCC to HCP and BCC-martensitic transformations in a CoCrFeNiMn high-entropy alloy by severe plastic deformation

Hamed Shahmir et al.

Summary: High-pressure torsion on an equiatomic CoCrFeNiMn high entropy alloy at room and cryogenic temperatures induces FCC to HCP and BCC martensitic transformations, effectively strengthening the alloy through increasing straining and decreasing deformation temperature. This transformation plays a significant role in altering the mechanical properties of the alloy under different deformation conditions.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Non-equiatomic FeMnCrNiAl high-entropy alloys with heterogeneous structures for strength and ductility combination

D. Liu et al.

Summary: The research demonstrates that nonequiatomic high-entropy alloys with fully-recrystallized and composite structures can provide a synergistic combination of strength and ductility at ambient and cryogenic temperatures. Calculations of flow stress using the rule of the mixture reveal the impact of various strengthening mechanisms on alloy performance.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Chemistry, Physical

Elucidating the transition of cryogenic deformation mechanism of CrMnFeCoNi high entropy alloy

Wujing Fu et al.

Summary: The evolution of the deformation mechanism of CrMnFeCoNi high entropy alloy under cryogenic temperature was investigated through compressive experiments and transmission electron microscopy character-ization. It was found that the deformation mode of the alloy at 123 K can be divided into two stages, helping to understand the temperature dependent deformation mechanism of high entropy alloys.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Mechanical performance of (NbTaW)1-xMox (x=0, 0.05, 0.15, 0.25) refractory high entropy alloys: Perspective from experiments and first principles calculations

Yonggang Tong et al.

Summary: By adjusting the alloy composition, the mechanical properties of NbMoTaW refractory high entropy alloy have been improved, especially the plasticity at room temperature. The experimental and first-principles calculation results are in good agreement, demonstrating that optimizing composition is an effective method to enhance alloy performance.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced mechanical performance of grain boundary precipitation-hardened high-entropy alloys via a phase transformation at grain boundaries

Y. L. Qi et al.

Summary: The study introduces a novel strategy utilizing the local stress concentration induced by grain-boundary precipitation as a driving force to trigger phase transformation in high-entropy alloys, resulting in a superior combination of high strength and high ductility.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Novel BCC VNbTa refractory multi-element alloys with superior tensile properties

Zhenhua Han et al.

Summary: The refractory V-Nb-Ta alloys with single BCC structure exhibited excellent combination of strength and plasticity, which was attributed to the solid solution strengthening effect caused by the large atomic size misfit among Nb, Ta and V elements.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Phase evolution, microstructure, and mechanical behaviors of the CrFeNiAlxTiy medium-entropy alloys

Mengdi Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Letter Chemistry, Physical

A novel cobalt-free FeMnCrNi medium-entropy alloy with exceptional yield strength and ductility at cryogenic temperature

B. B. Bian et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Investigating the micro and nanomechanical properties of CoCrFeNi-Cx high-entropy alloys containing eutectic carbides

L. J. Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Breakthrough the strength-ductility trade-off in a high-entropy alloy at room temperature via cold rolling and annealing

Wei Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of carbon on microstructure and mechanical properties of Fe36Mn36Ni9Cr9Al10 high-entropy alloys

Li Bai et al.

MATERIALS SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Effect of boron addition on the solidification sequence and microstructure of AlCoCrFeNi alloys

V Ferrari et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Annealing-induced abnormal hardening in a cold rolled CrMnFeCoNi high entropy alloy

Ji Gu et al.

SCRIPTA MATERIALIA (2019)

Add to Collection

Article Chemistry, Physical

Microstructures and mechanical properties of nano carbides reinforced CoCrFeMnNi high entropy alloys

Jianbo Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Additive manufacturing of fine-grained and dislocation-populated CrMnFeCoNi high entropy alloy by laser engineered net shaping

S. Guan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Chemistry, Physical

Carbide precipitation strengthening in fine-grained carbon-doped FeCoCrNiMn high entropy alloy

Jian Peng et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Overcoming the strength-ductility trade-off via the formation of nanoscale Cr-rich precipitates in an ultrafine-grained FCC CrFeNi medium entropy alloy matrix

Dingshan Liang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Novel Co-free CrFeNiNb0.1Tix high-entropy alloys with ultra high hardness and strength

Mengdi Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Boron doped ultrastrong and ductile high-entropy alloys

Jae Bok Seol et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Multidisciplinary Sciences

Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes

Zhifeng Lei et al.

NATURE (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Six decades of the Hall-Petch effect - a survey of grain-size strengthening studies on pure metals

Z. C. Cordero et al.

INTERNATIONAL MATERIALS REVIEWS (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of minor B addition on microstructure and properties of AlCoCrFeNi multi-compenent alloy

Qiu-shi Chen et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)

Add to Collection

Review Materials Science, Multidisciplinary

Microstructures and properties of high-entropy alloys

Yong Zhang et al.

PROGRESS IN MATERIALS SCIENCE (2014)

Add to Collection

Article Multidisciplinary Sciences

A fracture-resistant high-entropy alloy for cryogenic applications

Bernd Gludovatz et al.

SCIENCE (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.