☆ 4.7 Article

Effect of minor Ca addition on microstructure and mechanical properties of a low-alloyed Mg-Al-Zn-Sn alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Spheroiding and refining of coarse CaMgSn phase in Mg-Al-Sn-Ca alloys for simultaneously improved strength and ductility via sub-rapid solidification and controlled rolling

Min Zha et al.

Summary: A novel Mg-4.5Al-1.5Sn-0.5Ca alloy with high mechanical properties was produced via sub rapid solidification and controlled rolling. The morphology of CaMgSn phase changed from long-rod to refined spherical/quasi-spherical through the processing strategy proposed in this study. The alloy exhibited impressive strength (yield strength of approximately 275 MPa and ultimate tensile strength of approximately 338 MPa) and ductility (elongation of approximately 20%) due to the formation of dispersed nano-sized CaMgSn precipitates.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Rapid dislocation-mediated solute repartitioning towards strain-aging hardening in a fine-grained dilute magnesium alloy

Zhen-Ming Hua et al.

Summary: By manipulating solute distribution while keeping a fine-grain structure, achieving appreciable strain-aging hardening response coupling with fine-grain strengthening guarantees the development of strong dilute Mg alloy.

MATERIALS RESEARCH LETTERS (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

A rolled Mg-8Al-0.5Zn-0.8Ce alloy with high strength-ductility synergy via engineering high-density low angle boundaries

Xiao Ma et al.

Summary: By using rotated hard-plate rolling method, we have successfully obtained a Mg alloy with high strength-ductility synergy. The alloy exhibits excellent yield strength, ultimate tensile strength, and elongation-to-failure. It is found that the presence of low angle boundaries in the alloy contributes significantly to its mechanical properties.

JOURNAL OF MAGNESIUM AND ALLOYS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Dynamic recrystallization, twinning behaviors and mechanical response of pre-twinned AZ31 Mg alloy sheet along various strain paths at warm temperature

Xiaohuan Pan et al.

Summary: This study investigates the dynamic recrystallization, twinning behaviors, and mechanical response of AZ31 Mg alloy sheet pre-twinned in the transverse direction at room temperature. The strain path angle is found to significantly affect the microstructural evolution and mechanical response. Continuous dynamic recrystallization and detwinning play important roles in coordinating strain at different strain path angles. Both strengthening and weakening effects are observed in the pre-twinned samples.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Review Metallurgy & Metallurgical Engineering

Alloying design and microstructural control strategies towards developing Mg alloys with enhanced ductility

Zhong-Zheng Jin et al.

Summary: Magnesium alloys show promising potential as lightweight structural materials in transportation and aerospace fields due to their low density and high specific strength. However, most high-strength magnesium alloys exhibit poor formability and ductility at room temperature, limiting their applications. Recent research has focused on enhancing the ductility of magnesium alloys through alloying design strategies and microstructural control using advanced processing technologies.

JOURNAL OF MAGNESIUM AND ALLOYS (2022)

Add to Collection

Article Engineering, Mechanical

Enhanced superplasticity achieved by disclination-dislocation reactions in a fine-grained low-alloyed magnesium system

Min Zha et al.

Summary: Superplastic forming is crucial for producing complex-shaped components in Mg-alloys, especially in high-alloyed systems. However, stabilizing small grains and facilitating grain boundary sliding in low-alloyed systems is challenging due to insufficient precipitates. Through a unique design strategy involving solute segregation, an Mg-1Zn-0.2Ca-0.2Zr-0.1Ag (wt.%) alloy achieved ~450% superplastic strain by absorbing intragranular dislocations through stress-driven grain boundary migration mediated by disclination-dislocation reactions. This study provides insights into the relationship between microstructural defects evolution and strain accommodation during superplastic deformation, shedding light on the nature of superplasticity mechanism.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

Add to Collection

Article Chemistry, Physical

Novel Mg-Al-Sn-Ca with enhanced mechanical properties and high corrosion rate via sub-rapid solidification for degradable magnesium alloy

Dawei Wang et al.

Summary: This study utilizes sub-rapid solidification (SRS) to modify the microstructure, particularly the eutectic phase, of Mg-4.5Al-1.5Sn-0.5Ca alloy. The SRS alloy exhibits superior strength-ductility synergy and increased corrosion rates compared to the conventional solidification alloy. This work proposes a novel degradable magnesium alloy and a processing method for its preparation.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Tailoring Mechanical Properties of Mg-Al-Zn-Sn-Mn Alloy by Multipass Equal Channel Angular Pressing

Min Zha et al.

Summary: This study investigates the microstructure and texture evolution of a Mg-3.7Al-0.7Zn-0.8Sn-0.4Mn alloy under different ECAP routes, showing that increasing the number of ECAP passes can improve strength and ductility. The optimized mechanical properties can be achieved through proper ECAP processing, indicating the great potential of Mg-Al-Zn-Sn alloys for low-cost high-strength-ductility wrought Mg alloys.

ADVANCED ENGINEERING MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of large thickness-reduction on microstructure evolution and tensile properties of Mg-9Al-1Zn alloy processed by hard-plate rolling

Yong-Kang Li et al.

Summary: Large thickness-reduction in hard-plate rolling processing can optimize the bimodal-grained structure of Mg-9Al-1Zn alloy (AZ91), enhancing both the strength and ductility of the material, overcoming the trade-off dilemma between strength and ductility.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Development of low-alloyed Mg-Zn-Ca-Sn-Mn alloy with high strength-ductility synergy by sub-rapid solidification and hot rolling

Zhen-Ming Hua et al.

Summary: A new low-alloyed Mg alloy with high strength and ductility was successfully fabricated by combining subrapid solidification and hot rolling techniques.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Tailoring bimodal grain structure of Mg-9Al-1Zn alloy for strength-ductility synergy: Co-regulating effect from coarse Al2Y and submicron Mg17Al12 particles

Yong-Kang Li et al.

Journal of Magnesium and Alloys (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Balancing the strength and ductility of Mg-6Zn-0.2Ca alloy via sub-rapid solidification combined with hard-plate rolling

Zhong-Zheng Jin et al.

Summary: The utilization of SRS combined with HPR process has led to an increase in elongation with maintained tensile strength in Mg-6Zn-0.2Ca alloy. The refined grain structure and eutectic phase, along with the presence of excessive Ca solute atoms, contribute to the enhanced ductility and strain-hardening ability of the alloy.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

The role of Ca, Al and Zn on room temperature ductility and grain boundary cohesion of magnesium

Supriya Nandy et al.

Summary: This study investigates the quantitative roles of Ca, Al, and Zn in improving the ductility of Mg alloys, with a focus on the synergistic effects of Ca and Zn. The results show that the balanced influence of reduced slip anisotropy and increased grain boundary cohesion can design high strength and high ductility rare-earth free Mg alloy. The addition of Ca, Zn, and Al have different effects on the alloy's performance, and the balanced effects contribute to improved strength and ductility.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Add to Collection

Article Chemistry, Physical

Compositional optimization of Mg-Zn-Sc sheet alloys for enhanced room temperature stretch formability

Mingzhe Bian et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Chemistry, Physical

Grain refinement mechanism and improved mechanical properties in Mg-Sn alloy with trace Y addition

X. Y. Qian et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Transitions in mechanical behavior and in deformation mechanisms enhance the strength and ductility of Mg-3Gd

Xuan Luo et al.

ACTA MATERIALIA (2020)

Add to Collection

Article Chemistry, Physical

Microstructure, tensile properties, and corrosion resistance of extruded Mg-1Bi-1Zn alloy: The influence of minor Ca addition

Yan-hui Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Chemistry, Physical

Effect of microalloyed Ca on the microstructure and corrosion behavior of extruded Mg alloy AZ31

Cheng Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Unveiling annealing texture formation and static recrystallization kinetics of hot-rolled Mg-Al-Zn-Mn-Ca alloy

Qinghang Wang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

New Mg-Al based alloy sheet with good room-temperature stretch formability and tensile properties

T. Nakata et al.

SCRIPTA MATERIALIA (2020)

Add to Collection

Article Chemistry, Physical

Exploring the Hall-Petch relation and strengthening mechanism of bimodal-grained Mg-Al-Zn alloys

Zhong-Zheng Jin et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Design of multicomponent Mg-Al-Zn-Sn-Bi alloys with refined microstructure and enhanced tensile properties

Peng-Yue Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Solute segregation assisted superplasticity in a low-alloyed Mg-Zn-Ca-Sn-Mn alloy

Zhen-Ming Hua et al.

MATERIALIA (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Highly deformable Mg-Al-Ca alloy with Al2Ca precipitates

Gaoming Zhu et al.

ACTA MATERIALIA (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Interplay between the effects of deformation mechanisms and dynamic recrystallization on the failure of Mg-3Al-1Zn

M. W. Vaughan et al.

ACTA MATERIALIA (2019)

Add to Collection

Article Engineering, Mechanical

Improving ductility of a Mg alloy via non-basal < a > slip induced by Ca addition

Gaoming Zhu et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

Add to Collection

Article Chemistry, Physical

Influences of pre-existing Mg17Al12 particles on static recrystallization behavior of Mg-Al-Zn alloys at different annealing temperatures

Xin-Yu Xu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of Mg17Al12 second phase particles on twinning-induced recrystallization behavior in Mg-Al-Zn alloys during gradient hot rolling

Zhong-Zheng Jin et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

A superplastic bimodal grain-structured Mg-9Al-1Zn alloy processed by short-process hard-plate rolling

Hong-Min Zhang et al.

MATERIALIA (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Development of low-alloyed and rare-earth-free magnesium alloys having ultra-high strength

Hucheng Pan et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Chemistry, Physical

Improvement of mechanical properties and reduction of yield asymmetry of extruded Mg-Al-Zn alloy through Sn addition

Sang Woo Bae et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Chemistry, Physical

Controlling the microstructure and improving the tensile properties of extruded Mg-Sn-Zn alloy through Al addition

Sang-Hoon Kim et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Engineering, Biomedical

Mechanical and degradation property improvement in a biocompatible Mg-Ca-Sr alloy by thermomechanical processing

Hunter B. Henderson et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of Sn content on strain hardening behavior of as-extruded Mg-Sn alloys

Chaoyue Zhao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of rolling conditions on the microstructure and mechanical properties in a Mg-Al-Ca-Mn-Zn alloy sheet

M. Z. Bian et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Bake-hardenable Mg-Al-Zn-Mn-Ca sheet alloy processed by twin-roll casting

M. Z. Bian et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Achieving exceptionally high strength in Mg-3Al-1Zn-0.3Mn extrusions via suppressing intergranular deformation

Z. R. Zeng et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Ductility enhancement in Mg-0.2%Ce alloys

R. K. Sabat et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Chemistry, Physical

Strengthening effect of nano and micro-sized precipitates in the hot-extruded Mg-5Sn-3Zn alloys with Ca addition

L. L. Chang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Chemistry, Physical

Excellent ductility and strong work hardening effect of as-cast Mg-ZnZr-Yb alloy at room temperature

Dongdong Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of Al and Zn contents on the microstructure and mechanical properties of Mg-Al-Zn-Ca magnesium alloys

Fang Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of Zn on the microstructure and tensile properties of as-extruded Mg-8A1-2Sn alloy

Hui-Yuan Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Sn addition on the microstructure and deformation behavior of Mg-3Al alloy

Byeong-Chan Suh et al.

ACTA MATERIALIA (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Texture evolution during static recrystallization of cold-rolled magnesium alloys

Z. R. Zeng et al.

ACTA MATERIALIA (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Evolution of tension and compression asymmetry of extruded Mg-Al-Sn-Zn alloy with respect to forming temperatures

Sang-Ik Lee et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Processing and microstructure-property relations of high-strength low-alloy (HSLA) Mg-Zn-Ca alloys

J. Hofstetter et al.

ACTA MATERIALIA (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructures and mechanical properties of Mg-Al-Ca alloys affected by Ca/Al ratio

Li Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Annealing strengthening in a dilute Mg-Zn-Ca sheet alloy

Z. R. Zeng et al.

SCRIPTA MATERIALIA (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Enhancing mechanical properties of Mg-Sn alloys by combining addition of Ca and Zn

Hucheng Pan et al.

MATERIALS & DESIGN (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Precipitate characteristics and their effect on the prismatic-slip-dominated deformation behaviour of an Mg-6 Zn alloy

J. Jain et al.

ACTA MATERIALIA (2013)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microstructure and mechanical properties of as-cast Mg-Sn-Ca alloys and effect of alloying elements

K. Suresh et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Influence of grain size and texture on Hall-Petch relationship for a magnesium alloy

W. Yuan et al.

SCRIPTA MATERIALIA (2011)

Add to Collection

Article Nanoscience & Nanotechnology

Achieving high strength and high ductility in magnesium alloys using severe plastic deformation combined with low-temperature aging

W. J. Kim et al.

SCRIPTA MATERIALIA (2009)

Add to Collection

Article Materials Science, Multidisciplinary

The influence of calcium and cerium mischmetal on the microstructural evolution of Mg-3Al-1Zn during extrusion and resulting mechanical properties

T. Laser et al.

ACTA MATERIALIA (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Precipitation strengthening of a Mg-Al-Ca-based AXJ530 die-cast alloy

A. Suzuki et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)

Add to Collection

Article Materials Science, Multidisciplinary

The role of solute in grain refinement of magnesium

YC Lee et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.