☆ 4.6 Article

A simple pyrolysis of bio-wastes to prepare N, and P co-doped porous carbon for lithium-sulfur batteries

MATERIALS LETTERS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Fe2VO4 nanoparticles on rGO as anode material for high-rate and durable lithium and sodium ion batteries

Decheng Zhao et al.

Summary: Uniform small iron vanadate nanoparticles grown on reduced graphene oxide form a conductive-network, which exhibits stable high capacity, remarkable rate capability, and excellent long-cycle stability, making it an ideal anode material for high-rate and durable lithium and sodium-ion batteries.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Chemistry, Physical

Microstructure Evolution and Improved Permeability of Ceramic Waste-Based Bricks

Wenfei Zhou et al.

Summary: This paper introduces the method of preparing all-solid-waste-based permeable bricks using waste ceramic materials, magnesium slag, and coal gangue, and evaluates their mechanical properties and water permeability. It is found that the all-solid-waste-based permeable bricks have excellent water permeability, compressive strength, and apparent porosity, which is attributed to the porous microstructure and tight adhesive force formed at a high sintering temperature.

MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Porous Co2VO4 Nanodisk as a High-Energy and Fast-Charging Anode for Lithium-Ion Batteries

Jinghui Ren et al.

Summary: This article introduces a high-energy-density lithium-ion battery anode material Co2VO4 and its successful application in fast-charging LIBs. By designing a specific structure, the anode material possesses high capacity, safe lithiation potential, and excellent fast-charging performance.

NANO-MICRO LETTERS (2022)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Antiferroelectric stability and energy storage properties of Co-doped AgNbO3 ceramics

Danni Feng et al.

Summary: By doping ions, the energy storage performance of modified AgNbO3 ceramics is improved, achieving high efficiency and recoverable energy storage. Co-doping of Bi/Sc enhances the field-induced phase transitions and suppresses ferroelectricity.

JOURNAL OF SOLID STATE CHEMISTRY (2022)

Add to Collection

Article Engineering, Environmental

Rational design of ZnMn2O4 nanoparticles on carbon nanotubes for high-rate and durable aqueous zinc-ion batteries

Fei Gao et al.

Summary: A one-step hydrothermal method is used to synthesize ZnMn2O4 (ZMO) nanoparticles/carbon nanotubes (ZMO/CNTs) composite for stable high-rate zinc-ion storage. The high electrical conductive CNTs and small ZMO particles enhance the electrical conductivity of the composite, and the flexible CNTs network and strong interface interaction suppress structural degradation. The ZMO/CNTs composite exhibits high rate capability and long-term cycling stability.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Chemical

Defective WO3 nanoplates controllably decorated with MIL-101(Fe) nanoparticles to efficiently remove tetracycline hydrochloride by S-scheme mechanism

Hao Yang et al.

Summary: S-scheme hybrid MIL-101(Fe)/WO3 samples were prepared by immobilizing MIL-101(Fe) nanoparticles on the surface of WO3 nanoplates. The resulting hybrid sample exhibited highly efficient visible light-driven photocatalytic activity and good photostability, making it effective for the removal of TCH.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Single Atom Catalysts for Fuel Cells and Rechargeable Batteries: Principles, Advances, and Opportunities

Yuchao Wang et al.

Summary: This paper discusses the importance of developing efficient and robust electrochemical energy storage systems, as well as the role of single atom catalysts in improving device performance. Additionally, it summarizes the working principles and challenges of next-generation electrochemical energy storage and conversion devices.

ACS NANO (2021)

Add to Collection

Article Chemistry, Physical

Boosting interfacial charge transfer for alkaline hydrogen evolution via rational interior Se modification

Yi Liu et al.

Summary: By using Se-doped phosphides inside nitrogen-doped carbon as catalysts, this study successfully improved the performance of electrocatalytic hydrogen evolution reaction in alkaline media. Experimental and theoretical calculations showed that the CoSe phase generated by Se modification facilitated faster charge transfer and optimized the rate-determining step, enhancing the reaction kinetics of the catalyst.

NANO ENERGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Nonporous Gel Electrolytes Enable Long Cycling at High Current Density for Lithium-Metal Anodes

Wenqi Yan et al.

Summary: A unique nonporous gel polymer electrolyte with a uniform and dense structure is reported, which enables uniform distribution of lithium ions for dendrite-free lithium deposition, resulting in excellent battery performance.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Materials Science, Ceramics

High-temperature stability of dielectric and energy-storage properties of weakly-coupled relaxor (1-x)BaTiO3-xBi(Y1/3Ti1/2)O3 ceramics

Cuiying Ma et al.

Summary: Lead-free ceramics were synthesized via a solid state process, showing improved dielectric properties with higher polarization maxima and lower remnant polarization as the BYT content increased. The ceramics also exhibited good temperature stability of energy storage properties.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Core-Shell Co2VO4/Carbon Composite Anode for Highly Stable and Fast-Charging Sodium-Ion Batteries

Cong Wang et al.

Summary: The study introduces a core-shell Co2VO4/carbon composite anode to address the fast-charging issue of sodium-ion batteries, showing enhanced Na+ ion diffusion and electron transfer rates. With an ultrahigh current density of 5 A g(-1), the anode achieved a capacity of 135.1 mAh g(-1) and over 98% capacity retention after 2000 cycles.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis and Catalytic Performance of a New V-doped CeO2-supported Alkali-activated-steel-slag-based Photocatalyst

Kang Le et al.

Summary: A novel V-doped CeO2-supported alkali-activated-steel-slag-based catalyst (V-CeO2/AC) exhibits high photocatalytic activity for hydrogen production from water decomposition, attributed to the interaction between V-doped CeO2 active components and FeO in the catalyst carrier. The mechanism of photocatalytic water decomposition over the V-8CeO2/AC catalyst was proposed.

JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of A/B-Site Co-Doping on Microstructure and Dielectric Thermal Stability of AgNbO3 Ceramics

Hongpei Ran et al.

Summary: AgNbO3-based lead-free ceramics show enhanced dielectric thermal stability when co-doped with Bi3+, Zn2+, and Ti4+ via a solid-state reaction under oxygen flow. The microstructure, dielectric properties, and impedance spectra were systematically characterized, demonstrating stable dielectric properties for potential use in electronic devices.

SCIENCE OF ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Sulfur nanoparticles/Ti3C2Tx MXene with an optimum sulfur content as a cathode for highly stable lithium-sulfur batteries

Aoning Wang et al.

Summary: Titanium carbide MXene is proven to be an excellent host for the sulfur cathode in lithium-sulfur batteries, and the mass ratio of sulfur to MXene has a significant impact on the electrochemical performance of S/Ti3C2Tx MXene cathodes. The S/MXene composite with an optimum sulfur content demonstrates outstanding electrochemical performance.

DALTON TRANSACTIONS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

One-Step Synthesis of Porous Transparent Conductive Oxides by Hierarchical Self-Assembly of Aluminum-Doped ZnO Nanoparticles

Renheng Bo et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Electrochemistry

A multifunctional separator for high-performance lithium-sulfur batteries

Dezhi Yang et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Electrochemistry

Modifications of Separators for Li-S Batteries with Improved Electrochemical Performance

Dezhi Yang et al.

RUSSIAN JOURNAL OF ELECTROCHEMISTRY (2020)

Add to Collection

Article Energy & Fuels

Binder-free One-dimensional NiCo2O4 Nanowires@Carbon Papers Composite as an Anode for Lithium-Ion Batteries

Zhoulu Wang et al.

ENERGY & FUELS (2020)

Add to Collection

Article Electrochemistry

NiCo2Se4 Nanowires as a High-Performance Bifunctional Oxygen Electrocatalyst

Hugo Sancho et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Article Multidisciplinary Sciences

Occurrence of the potent mutagens 2-nitrobenzanthrone and 3-nitrobenzanthrone in fine airborne particles

Aldenor G. Santos et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Covalent Bonding of Si Nanoparticles on Graphite Nanosheets as Anodes for Lithium-Ion Batteries Using Diazonium Chemistry

Yi Zhang et al.

NANOMATERIALS (2019)

Add to Collection

Article Chemistry, Physical

High-Rate and High-Voltage Aqueous Rechargeable Zinc Ammonium Hybrid Battery from Selective Cation Intercalation Cathode

Chunyang Li et al.

ACS APPLIED ENERGY MATERIALS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Si/C Composites as Negative Electrode for High Energy Lithium Ion Batteries

Yi Zhang et al.

CHINESE JOURNAL OF CHEMISTRY (2017)

Add to Collection

Review Chemistry, Physical

Synthesis and performance of Cu2ZnSnS4 semiconductor as photocathode for solar water splitting

Jing Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

© Peeref 2019-2024. All rights reserved.