4.6 Article

Shear-Stable Polymer Brush Surfaces

Related references

Note: Only part of the references are listed.
Article Nanoscience & Nanotechnology

Bioinspired Design of a Cartilage-like Lubricated Composite with Mechanical Robustness

Weiyi Zhao et al.

Summary: A new cartilage-like composite material (Composite-LP) was developed by grafting a thick hydrophilic polyelectrolyte brush layer onto a three-dimensional elastomer scaffold-hydrogel composite structure, exhibiting good mechanical properties and surface lubrication performance. The design concept of coupling non-dissipative mechanism and interface lubrication provides a new avenue for developing cartilage-like hydrogels and soft robots.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Nanoscience & Nanotechnology

Exploiting the Synergy between Concentrated Polymer Brushes and Laser Surface Texturing to Achieve Durable Superlubricity

Sorin-Cristian Vladescu et al.

Summary: This study investigates the interactions between concentrated polymer brushes (CPBs) and laser-produced surface texture (LST). The results show that the combination of CPB-LST can reduce the friction coefficient and improve the durability of CPBs through a lateral support mechanism offered by the textured micro-features. The study also reveals the failure mechanisms of CPBs, which are important for the development of CPBs for future applications.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Multidisciplinary

Repeatedly Regenerating Mechanically Robust Polymer Brushes from Persistent Initiator Coating (PIC)

Yizhe Liu et al.

Summary: This study developed a novel surface initiated polymerization method using an organic-inorganic hybrid persistent initiator coating (PIC) with embedded initiator molecules. Compared to traditional silane initiators, PIC showed improved mechanical stability and wear resistance, and it can trigger new polymerization reactions even after wear. Furthermore, PIC can be applied on various substrates for material functionalization.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Article Chemistry, Multidisciplinary

Organic-Inorganic Hybrid Polysiloxane Brushes with Improved Lubrication and Load-Bearing Capacity

Yizhe Liu et al.

Summary: In this study, a nanoscale organic-inorganic hybrid lubricative coating (OHL) with low friction coefficient and wear resistance was developed. By grafting polysiloxane brushes on an inorganic silica sol layer, the mechanical stability of the brushes was improved, and the lubrication performance was enhanced. The OHL coating demonstrated excellent stability and general applicability for reducing friction coefficient and enhancing wear resistance.

LANGMUIR (2022)

Article Chemistry, Multidisciplinary

Self-Lubricative Organic-Inorganic Hybrid Coating with Anti-Icing and Anti-Waxing Performances by Grafting Liquid-Like Polydimethylsiloxane

Xiaoqing Hao et al.

Summary: In this study, organic-inorganic hybrid coatings were prepared by grafting PDMS onto solid surfaces. The coatings exhibited liquid repellency, anti-fouling, self-lubrication, anti- and delay-ice, and anti-paraffin properties. The PDMS chains grafted onto the inorganic silica layer provided excellent durability.

ADVANCED MATERIALS INTERFACES (2022)

Article Nanoscience & Nanotechnology

Facile Preparation of a Transparent and Rollable Omniphobic Coating with Exceptional Hardness and Wear Resistance

Ziruo Lai et al.

Summary: This paper reports the preparation of a bilayer bifunctional coating for foldable smartphones, which is deposited via a single polymer mixture. The coating exhibits excellent surface energy, transmittance, hardness, and durability, making it a great candidate for protective coatings in various applications.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Multidisciplinary

Vapor Lubrication for Reducing Water and Ice Adhesion on Poly(dimethylsiloxane) Brushes

Shuai Li et al.

Summary: This study shows that exposing the surface of PDMS brushes to organic solvent vapors can effectively reduce water droplet adhesion, allowing for fast removal of water droplets and de-icing.

ADVANCED MATERIALS (2022)

Article Nanoscience & Nanotechnology

Brush-like Amphiphilic Polymer for Environmental Adaptive Coating

Zhengfeng Ma et al.

Summary: In this study, a brush-like amphiphilic copolymer was synthesized to construct an environment-adaptive multifunctional coating. The coating exhibited various functions depending on the surrounding environment, such as antifogging, underwater oleophobicity, self-cleaning, antibacterial properties, triboelectric resistance, and super lubrication in water-rich surroundings, and low friction coefficient and antioil properties in dry air surroundings. This research presents a strategy for the construction of environment-adaptive coatings with important application prospects in the field of optical lenses.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Nanoscience & Nanotechnology

Rapid and Robust Surface Treatment for Simultaneous Solid and Liquid Repellency

Alex Kate Halvey et al.

Summary: The study developed a surface modification technique by covalently tethering a thin film of linear chain siloxane molecules to the surface, demonstrating anti-fouling capabilities. The treated surfaces are durable and repel a wide range of liquids, while also reducing adhesion of solids and minimizing fouling simultaneously.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Robust Hybrid Omniphobic Surface for Stain Resistance

Zhengfeng Ma et al.

Summary: Inspired by natural living surfaces, researchers have developed a robust and transparent omniphobic coating with excellent liquid repellency and stain resistance properties using a one-step dip coating method. The coating showed excellent mechanical wear resistance and maintained its stain resistance property and wettability even after hundreds of thousands of friction cycles. This hybrid coating possesses simple preparation, excellent properties, and durability, attracting widespread interest in the engineering application field.

ACS APPLIED MATERIALS & INTERFACES (2021)

Review Polymer Science

Liquid and liquid-like surfaces/coatings that readily slide fluids

Jasmine Buddingh et al.

Summary: Recent studies have shown that liquid and liquid-like surfaces offer excellent sliding properties for various liquids regardless of their surface tensions. These technologies are primarily evaluated based on their dynamic dewetting characteristics, preparation techniques, durability, and applicable functionalities. Future efforts should focus on balancing the durability of slippery properties with the simplicity/scalability and environmental impact of the design.

PROGRESS IN POLYMER SCIENCE (2021)

Article Engineering, Mechanical

Enhancing durability of concentrated polymer brushes using microgrooved substrates

Mayu Miyazaki et al.

Summary: The study found that parallel grooves with adequate dimensions significantly improve the durability of CPBs in lubricated sliding, and CPBs on a flat substrate exhibit a layered structure, with an additional reinforced tough layer provided by the parallel grooves.
Article Chemistry, Multidisciplinary

One-Step Synthesis of a Durable and Liquid-Repellent Poly(dimethylsiloxane) Coating

Jie Liu et al.

Summary: This research introduces a one-step grafting method for poly(dimethylsiloxane) (PDMS) brushes on surfaces, meeting the requirements of fast, easy, universal, stable, robust, and environmentally friendly coatings. The coatings exhibit excellent sliding properties and high temperature resistance, making them an ideal solution for long-term degradation issues of coatings for heat-transfer surfaces.

ADVANCED MATERIALS (2021)

Review Chemistry, Applied

Brush-like organic-inorganic hybrid polysiloxane surface with omniphobicity and extreme durability

Zhengfeng Ma et al.

Summary: This study developed a brush-like organic-inorganic hybrid omniphobic surface with extreme stability and wide application potential, maintaining wettability under harsh conditions and suitable for various materials and shapes.

PROGRESS IN ORGANIC COATINGS (2021)

Article Chemistry, Multidisciplinary

Macroscopic Evidence of the Liquidlike Nature of Nanoscale Polydimethylsiloxane Brushes

Xiaoxiao Zhao et al.

Summary: Macroscopic evidence shows the liquidlike nature of surface-tethered PDMS brushes, with ice adhering to them indefinitely. The PDMS brush ice adhesion displays rheological behavior reminiscent of liquids, allowing ice to detach solely by self-weight. Methylation results in omniphobicity, significantly higher contact angles, and especially increased repulsion of polar liquids.

ACS NANO (2021)

Article Chemistry, Multidisciplinary

Stretchable Anti-Fogging Tapes for Diverse Transparent Materials

Shaoting Lin et al.

Summary: The SAT is a stretchable anti-fogging tape that can be persistently applied to various transparent materials to prevent fogging effectively. It consists of three transparent layers, maintaining high transmittance and durable anti-fogging effects in high-humidity environments and various mechanical deformation modes.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Nanoscience & Nanotechnology

Passive Removal of Highly Wetting Liquids and Ice on Quasi-Liquid Surfaces

Lei Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

High Lubricity Meets Load Capacity: Cartilage Mimicking Bilayer Structure by Brushing Up Stiff Hydrogels from Subsurface

Mingming Rong et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Engineering, Environmental

Transparent organic/silica nanocomposite coating that is flexible, omniphobic, and harder than a 9H pencil

Kaka Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Chemistry, Multidisciplinary

Transparent Omniphobic Coating with Glass-Like Wear Resistance and Polymer-Like Bendability

Kaka Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Review Materials Science, Multidisciplinary

Brushing up functional materials

Shuanhong Ma et al.

NPG ASIA MATERIALS (2019)

Article Green & Sustainable Science & Technology

Viscoelastic solid-repellent coatings for extreme water saving and global sanitation

Jing Wang et al.

NATURE SUSTAINABILITY (2019)

Review Chemistry, Multidisciplinary

Polymer Brushes: Efficient Synthesis and Applications

Chun Feng et al.

ACCOUNTS OF CHEMICAL RESEARCH (2018)

Correction Chemistry, Multidisciplinary

Topological Polymer Chemistry Enters Surface Science: Linear versus Cyclic Polymer Brushes (vol 55, pg 15583, 2016)

G. Morgese et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Article Chemistry, Multidisciplinary

Covalently Attached Liquids: Instant Omniphobic Surfaces with Unprecedented Repellency

Liming Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Article Chemistry, Multidisciplinary

Oil-Soluble Polymer Brush Grafted Nanoparticles as Effective Lubricant Additives for Friction and Wear Reduction

Roger A. E. Wright et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Review Engineering, Biomedical

Lubrication of Articular Cartilage

Sabrina Jahn et al.

ANNUAL REVIEW OF BIOMEDICAL ENGINEERING, VOL 18 (2016)

Article Chemistry, Multidisciplinary

Clear and Durable Epoxy Coatings that Exhibit Dynamic Omniphobicity

Heng Hu et al.

ADVANCED MATERIALS INTERFACES (2016)

Article Chemistry, Multidisciplinary

Fluorine-Free Anti-Smudge Polyurethane Coatings

Muhammad Rabnawaz et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Article Chemistry, Multidisciplinary

Graft-Copolymer-Based Approach to Clear, Durable, and Anti-Smudge Polyurethane Coatings

Muhammad Rabnawaz et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Review Chemistry, Multidisciplinary

Tapping the Potential of Polymer Brushes through Synthesis

Bin Li et al.

ACCOUNTS OF CHEMICAL RESEARCH (2015)

Article Chemistry, Multidisciplinary

Stratified Polymer Grafts: Synthesis and Characterization of Layered 'Brush' and 'Gel' Structures

Ang Li et al.

ADVANCED MATERIALS INTERFACES (2014)

Article Physics, Multidisciplinary

Static and dynamic properties of grafted ring polymer: Molecular dynamics simulation

He Su-Zhen et al.

CHINESE PHYSICS B (2013)

Article Chemistry, Multidisciplinary

A Statically Oleophilic but Dynamically Oleophobic Smooth Nonperfluorinated Surface

Dalton F. Cheng et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2012)

Review Chemistry, Multidisciplinary

Patterned polymer brushes

Tao Chen et al.

CHEMICAL SOCIETY REVIEWS (2012)

Review Chemistry, Physical

Biomimetic lubrication

Andra Dedinaite

SOFT MATTER (2012)

Article Engineering, Chemical

Lubrication with Oil-Compatible Polymer Brushes

Robert M. Bielecki et al.

TRIBOLOGY LETTERS (2012)

Article Chemistry, Multidisciplinary

Interfacial Friction and Adhesion of Polymer Brushes

Lucas J. T. Landherr et al.

LANGMUIR (2011)

Article Chemistry, Multidisciplinary

Biomimetic anchor for surface-initiated polymerization from metal substrates

XW Fan et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2005)

Article Multidisciplinary Sciences

Lubrication by charged polymers

U Raviv et al.

NATURE (2003)