☆ 4.6 Article

Optimized Morphology Enables High-Efficiency Nonfullerene Ternary Organic Solar Cells

LANGMUIR (2023)

Related references

Note: Only part of the references are listed.
Article Energy & Fuels

Modulation of Vertical Component Distribution for Large-Area Thick-Film Organic Solar Cells

Lin Zhang et al.

Summary: The study shows that adding more additives in thick-film organic solar cells can promote charge transport and enhance crystallinity, thereby reducing charge recombination and electron (or hole) accumulation within the active layer.

SOLAR RRL (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Single-Junction Organic Solar Cells with 19.17% Efficiency Enabled by Introducing One Asymmetric Guest Acceptor

Rui Sun et al.

Summary: The ternary strategy is an effective approach to achieve high-efficiency OSCs, but the nonradiative voltage loss limits further efficiency improvements. By incorporating an asymmetric guest acceptor BTP-2F2Cl, the OSCs show improved photoluminescence quantum yield, exciton diffusion length, and absorption spectrum, leading to enhanced power conversion efficiency.

ADVANCED MATERIALS (2022)

Add to Collection
Article Chemistry, Multidisciplinary

The Intrinsic Role of the Fusion Mode and Electron-Deficient Core in Fused-Ring Electron Acceptors for Organic Photovoltaics

Yuan Guo et al.

Summary: The A-DA ' D-A fused-ring electron acceptors with an angular fusion mode and electron-deficient core have greatly improved organic photovoltaic efficiency. The structure of Y6, compared with other A-D-A acceptors, leads to stronger absorption, faster exciton diffusion, exciton dissociation, and electron transport. The electron-vibration coupling is also decreased, contributing to efficient charge generation under low driving forces in Y6-based devices.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection
Article Chemistry, Physical

Tuning the Phase Separation by Thermal Annealing Enables High-Performance All-Small-Molecule Organic Solar Cells

Lingxian Meng et al.

Summary: This study demonstrates that thermal annealing treatment can effectively tune the phase separation within the active layer morphology of organic solar cells, leading to enhanced device performance.

CHEMISTRY OF MATERIALS (2022)

Add to Collection
Article Chemistry, Physical

Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology

Lei Zhu et al.

Summary: Morphological control of donor and acceptor domains is crucial for efficient organic photovoltaics, and this study demonstrates a double-fibril network strategy to achieve a high power conversion efficiency of 19.3%.

NATURE MATERIALS (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Unfused Acceptors Matching π-Bridge Blocks with Proper Frameworks Enable Over 12% As-Cast Organic Solar Cells

Yue Liu et al.

Summary: This study reports four unfused-ring acceptors (UFAs) with different molecular frameworks, which are used to fabricate high-efficiency organic solar cells (OSCs) with wet films. These UFAs exhibit strong near-infrared absorption and narrow optical band gap, and when blended with polymer donors, they promote efficient charge transport. Experimental and theoretical simulations demonstrate the impact of the molecular framework of UFAs on their performance.

SMALL (2022)

Add to Collection
Article Chemistry, Physical

Understanding Interfacial Recombination Processes in Narrow-Band-Gap Organic Solar Cells

Nora Schopp et al.

Summary: This study demonstrates the role of the front electrode:active layer interface in organic photovoltaics. The amount of interfacial recombination is significantly affected by the choice of electrode, while similar levels of bulk recombination are maintained. ZnO is identified as a suitable choice, pairing low surface recombination rates with beneficial charge carrier generation, favorable energy level alignment, and efficient extraction. On the other hand, PEDOT:PSS-based devices suffer from interfacial recombination, which can be suppressed by using a self-doped conjugated polyelectrolyte (CPE-K) instead.

ACS ENERGY LETTERS (2022)

Add to Collection
Review Chemistry, Physical

Industrial viability of single-component organic solar cells

Yakun He et al.

Summary: This article explores the industrial application value of bulk heterojunction (BHJ) organic solar cells (OSCs) and single-component OSCs (SCOSCs), including power conversion efficiency, photostability, and synthetic complexity. The results show that despite the slightly more complex synthesis, SCOSCs have higher industrial value and greater potential with increasing efficiency. Additionally, SCOSCs exhibit excellent photostability, making them a promising choice for industrial utilization.

JOULE (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Microscopic Structures, Dynamics, and Spin Configuration of the Charge Carriers in Organic Photovoltaic Solar Cells Studied by Advanced Time-Resolved Spectroscopic Methods

Kaoru Ohta et al.

Summary: This article reviews recent studies on organic bulk-heterojunction (BHJ) thin films and organic photovoltaic (OPV) cells, focusing on two key microscopic behaviors: local mobility of charge carriers and spin configuration and interaction of polaron pairs.

LANGMUIR (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Manipulating the D:A interfacial energetics and intermolecular packing for 19.2% efficiency organic photovoltaics

Chengliang He et al.

Summary: Manipulating the donor:acceptor energetics is crucial for achieving balanced charge separation and recombination in organic solar cells (OSCs). In this study, a non-fullerene electron acceptor, BTP-H2, was designed and synthesized to pair with the polymer donor PM6, showing strong intermolecular interaction and near-zero highest occupied molecular orbital (HOMO) offset. The results demonstrated efficient charge separation and optimized energy conversion, leading to high-performance OSCs with a power conversion efficiency (PCE) of 18.5% and a peak photon-to-electron response of approximately 90%.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Add to Collection
Article Chemistry, Physical

Tandem organic solar cells with 18.67% efficiency via careful subcell design and selection

Yuzhong Huang et al.

Summary: In this study, a novel wide bandgap acceptor F-ThBr was designed to achieve higher power conversion efficiency in tandem organic solar cells. By selecting and optimizing different subcell materials, a tandem OSC with a power conversion efficiency of 18.67% was constructed.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection
Article Multidisciplinary Sciences

Single-layered organic photovoltaics with double cascading charge transport pathways: 18% efficiencies

Ming Zhang et al.

Summary: By using quaternary blends, double cascading energy level alignment is achieved in bulk heterojunction organic photovoltaic active layers, optimizing light absorption, carrier transport, and charge-transfer state energy levels for higher power conversion efficiencies. The chemical structures of donors and acceptors allow control over electronic structure and charge-transfer state energy levels, enabling manipulation of hole-transfer rates, carrier transport, and non-radiative recombination losses.

NATURE COMMUNICATIONS (2021)

Add to Collection
Article Multidisciplinary Sciences

The role of charge recombination to triplet excitons in organic solar cells

Alexander J. Gillett et al.

Summary: The majority of charge recombination in organic solar cells that use NFAs occurs through non-emissive NFA triplet excitons under open-circuit conditions, reducing the open-circuit voltage. Engineering substantial hybridization between NFA triplet excitons and spin-triplet charge-transfer excitons can suppress this non-radiative recombination pathway, potentially leading to organic solar cells with power conversion efficiencies of 20% or more.

NATURE (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Pengqing Bi et al.

Summary: This study demonstrated the successful suppression of trap-state density and significant decrease in trap-state density of binary blend films through ternary strategy, which benefits charge transport and collection efficiency, leading to higher power conversion efficiencies.

SCIENCE CHINA-CHEMISTRY (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Tandem Organic Solar Cells with 18.7% Efficiency Enabled by Suppressing the Charge Recombination in Front Sub-Cell

Gongchu Liu et al.

Summary: By developing an efficient interconnecting layer and adjusting the composition of the active layer, the research achieved an efficient TOSC with a high fill factor and excellent PCE.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Mechanism of the Alcohol-Soluble Ionic Organic Interlayer in Organic Solar Cells

Chuang Feng et al.

Summary: This study investigates the adsorption behavior and working mechanism of alcohol-soluble ionic organic interlayer on different electrode substrates through a combination of experimental measurements and density functional theory calculations. The results reveal different adsorption mechanisms when the ionic organic bipyridine salt interlayer is adsorbed on Ag and ITO surfaces, providing important insights for understanding and improving the performance of organic electronic devices.

LANGMUIR (2021)

Add to Collection
Review Materials Science, Multidisciplinary

Layer-by-layer fabrication of organic photovoltaic devices: material selection and processing conditions

Marie D. M. Faure et al.

Summary: Layer-by-layer (LbL) processing is emerging as a promising strategy for fabrication of active layers in organic photovoltaic (OPV) devices. It offers better control and optimization of interfaces and morphology compared to traditional bulk heterojunction (BHJ) configuration, resulting in increased efficiency and stability.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Add to Collection
Article Chemistry, Physical

Regulating the phase separation of ternary organic solar cells via 3D architectured AIE molecules

Muhammad Abdullah Adil et al.

NANO ENERGY (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Integrated Perovskite/Bulk-Heterojunction Organic Solar Cells

Yongsheng Liu et al.

ADVANCED MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

Sequential Blade-Coated Acceptor and Donor Enables Simultaneous Enhancement of Efficiency, Stability, and Mechanical Properties for Organic Solar Cells

Yilin Wang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection
Article Physics, Applied

Organic solar cells probed with advanced neutron scattering techniques

Kerstin S. Wienhold et al.

APPLIED PHYSICS LETTERS (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Dithieno[3,2-b:2MODIFIER LETTER PRIME,3MODIFIER LETTER PRIME-d]pyrrol-Fused Asymmetrical Electron Acceptors: A Study into the Effects of Nitrogen-Functionalization on Reducing Nonradiative Recombination Loss and Dipole Moment on Morphology

Wei Gao et al.

ADVANCED SCIENCE (2020)

Add to Collection
Article Multidisciplinary Sciences

Alloy-like ternary polymer solar cells with over 17.2% efficiency

Qiaoshi An et al.

SCIENCE BULLETIN (2020)

Add to Collection
Article Chemistry, Physical

Constructing High-Performance Organic Photovoltaics via Emerging Non-Fullerene Acceptors and Tandem-Junction Structure

Pei Cheng et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Efficient Ternary Organic Solar Cells with a New Electron Acceptor Based on 3,4-(2,2-Dihexylpropylenedioxy)thiophene

Cai'e Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Vertical Miscibility of Bulk Heterojunction Films Contributes to High Photovoltaic Performance

Shi He et al.

ADVANCED MATERIALS INTERFACES (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Synergy of Liquid-Crystalline Small-Molecule and Polymeric Donors Delivers Uncommon Morphology Evolution and 16.6% Efficiency Organic Photovoltaics

Cenqi Yan et al.

ADVANCED SCIENCE (2020)

Add to Collection
Article Energy & Fuels

Metal oxides and noble metals application in organic solar cells

Popoti J. Maake et al.

SOLAR ENERGY (2020)

Add to Collection
Article Nanoscience & Nanotechnology

High-Efficiency Thermal-Annealing-Free Organic Solar Cells Based on an Asymmetric Acceptor with Improved Thermal and Air Stability

Jinsheng Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Chemistry, Physical

Role of Morphology and Forster Resonance Energy Transfer in Ternary Blend Organic Solar Cells

Aiswarya Abhisek Mohapatra et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection
Review Chemistry, Physical

Recent progress in ternary organic solar cells based on solution-processed non-fullerene acceptors

Dan Zhou et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection
Article Energy & Fuels

Incorporation of Hydrogen Molybdenum Bronze in Solution-Processed Interconnecting Layer for Efficient Nonfullerene Tandem Organic Solar Cells

Wenwu Zeng et al.

SOLAR RRL (2020)

Add to Collection
Article Energy & Fuels

A Nonfullerene Acceptor with Alkylthio- and Dimethoxy-Thiophene-Groups Yielding High-Performance Ternary Organic Solar Cells

Anping Zeng et al.

SOLAR RRL (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Tuning the electron-deficient core of a non-fullerene acceptor to achieve over 17% efficiency in a single-junction organic solar cell

Can Zhu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Miscibility Tuning for Optimizing Phase Separation and Vertical Distribution toward Highly Efficient Organic Solar Cells

Lifu Zhang et al.

ADVANCED SCIENCE (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Improved Charge Transport and Reduced Nonradiative Energy Loss Enable Over 16% Efficiency in Ternary Polymer Solar Cells

Runnan Yu et al.

ADVANCED MATERIALS (2019)

Add to Collection
Article Multidisciplinary Sciences

Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages

Yong Cui et al.

NATURE COMMUNICATIONS (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Lithium-Ion-Based Conjugated Polyelectrolyte as an Interface Material for Efficient and Stable Non-Fullerene Organic Solar Cells

Junli Li et al.

CHEMSUSCHEM (2019)

Add to Collection
Article Chemistry, Multidisciplinary

A multi-objective optimization-based layer-by-layer blade-coating approach for organic solar cells: rational control of vertical stratification for high performance

Rui Sun et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection
Review Energy & Fuels

Advances in Non-Fullerene Acceptor Based Ternary Organic Solar Cells

Huiting Fu et al.

SOLAR RRL (2018)

Add to Collection
Article Energy & Fuels

Correlating Three-dimensional Morphology With Function in PBDB-T:IT-M Non-Fullerene Organic Solar Cells

Wei Li et al.

SOLAR RRL (2018)

Add to Collection
Review Chemistry, Multidisciplinary

Conjugated-Polymer Blends for Organic Photovoltaics: Rational Control of Vertical Stratification for High Performance

Yu Yan et al.

ADVANCED MATERIALS (2017)

Add to Collection
Article Chemistry, Physical

Ternary Organic Solar Cells Based on Two Highly Efficient Polymer Donors with Enhanced Power Conversion Efficiency

Tao Liu et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection
Article Chemistry, Multidisciplinary

Energy-Level Modulation of Small-Molecule Electron Acceptors to Achieve over 12% Efficiency in Polymer Solar Cells

Sunsun Li et al.

ADVANCED MATERIALS (2016)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.