☆ 4.6 Article

Selective Removal of Boron from Aqueous Solutions Using ECH@NGM Aerogels with Excellent Hydrophilic and Mechanical Properties: Performance and Response Surface Methodology Analysis

LANGMUIR (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Analytical

Magnetic multi-walled carbon nanotubes-loaded alginate for treatment of industrial dye manufacturing effluent: adsorption modelling and process optimisation by central composite face-central design

Ali Azari et al.

Summary: In this study, the removal of dye ADMI from raw textile wastewater was investigated using magnetic multi-walled carbon nanotubes-loaded alginate. The key factors, including pH, adsorbent dose, and contact time, were optimized using response surface methodology-based central composite face-centred design. The adsorbents were characterized using various techniques. The developed model fit well with the experimental data, and under the optimized conditions, a high removal efficiency and ADMI adsorption capacity were achieved. The adsorption process was found to be monolayer and chemical in nature. The adsorption mechanism could be explained by the presence of negatively charged carboxyl and hydroxyl groups on the surface of the adsorbent.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL ANALYTICAL CHEMISTRY (2023)

Add to Collection

Article Environmental Sciences

Boron removal from aqueous solutions by chitosan/functionalized-SWCNT-COOH: Development of optimization study using response surface methodology and simulated annealing

Tolga Tasci et al.

Summary: The synthesized chitosan/functionalized-SWCNT-COOH material in this study can efficiently remove boric acid from aqueous solutions with a high adsorption capacity reaching up to 62.16 mg g(-1) under optimal conditions. The simulated annealing optimization technique and response surface method yielded very close results in terms of optimal conditions and adsorption capacity.

CHEMOSPHERE (2022)

Add to Collection

Article Engineering, Environmental

Unveiling the nature of boric acid adsorption by metal-organic frameworks with hexanuclear clusters

Ben Wu et al.

Summary: With the rapid development of industries, there is a growing demand for boric acid, but the world is also facing the issue of boron-containing wastewater. Metal-organic frameworks (MOFs), known for their exceptional stability and large surface area, have been identified as effective adsorbents for boron. In this study, Zr-6/Hf-6-based NU-1008 and NU-903 were investigated for their ability to remove boron from water. The results showed that Hf-6-based MOFs had a higher capacity for boron adsorption compared to Zr-6-based MOFs, which can be attributed to the weaker electronegativity of hafnium. Single crystal X-ray diffraction revealed the precise binding sites of boron on the MOFs.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Environmental Sciences

Removal of boron by a modified resin in fixed bed column: Breakthrough curve analysis using dynamic adsorption models and artificial neural network model

Shuqin Bai et al.

Summary: This study investigated the continuous removal of toxic element boron from aqueous solution using a new phenolic hydroxyl modified resin (T-resin). The results showed that the breakthrough time, exhaustion time, and uptake capacity of the column bed increased with increasing column bed height and decreased with increasing influent flow rate. The artificial neural network (ANN) model was found to be more accurate in predicting the breakthrough behavior of the column compared to the conventional models. The adsorption capacity of boron changed during five time regeneration.

CHEMOSPHERE (2022)

Add to Collection

Review Environmental Sciences

A review of boron removal from aqueous solution using carbon-based materials: An assessment of health risks

A. Yagmur Goren et al.

Summary: This paper extensively reviews the use of carbon-based materials, such as activated carbon, graphene oxide, and carbon nanotubes, for boron removal. It discusses the effects of operating conditions, kinetics, isotherm models, and removal methods. The study explores the impact of modifying the lifetime of carbon-based materials and concludes that modified materials have significantly higher boron adsorption capability. The addition of elements like tartaric acid improves the surface area, functional groups, and pore volume of carbon-based materials. Furthermore, the paper evaluates the health risks posed by boron in treated water and assesses the effectiveness of carbon-based materials for boron removal, along with future perspectives and research gaps.

CHEMOSPHERE (2022)

Add to Collection

Article Chemistry, Applied

Boron removal by glucamine-functionalized inverse vulcanized sulfur polymer

Amin Abbasi et al.

Summary: This study reports a novel sulfur-based boron selective adsorbent for boron removal, showing optimal adsorption capacity at pH 9. The regenerated adsorbent demonstrated good reusability after multiple cycles. Additionally, the study highlights the cost-effectiveness of utilizing elemental sulfur for efficient boron reduction in water.

REACTIVE & FUNCTIONAL POLYMERS (2022)

Add to Collection

Review Chemistry, Analytical

Experimental and analytical methods for testing inhibitors and fluids in water-based drilling environments

Tawfik A. Saleh

Summary: This review discusses the analysis methods used for evaluating the inhibitors and properties of drilling fluids, including various tests such as capillary suction time, bulk hardness, and linear swell meter. The review proves to be a valuable reference for researchers and the industrial sector.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Removal of boron from aqueous solutions by N-methyl-D-glucamine@γ-glycidoxypropyl-trimethoxysilane with nonwoven basalt fibers support

Yuanyang Zhang et al.

Summary: This study presents a novel organic-inorganic composite boron adsorbent NGN, which is environmentally friendly, water-resistant, non-toxic, and cost-effective, for separating and recycling boron from waste water. NGN demonstrated excellent adsorption performance, with an optimum capacity at pH 9.0 and fast equilibrium within 40 minutes. Competing ions had minimal impact on boron adsorption, except for Mg2+ which promoted it. NGN showed good regeneration performance after multiple adsorption-desorption cycles.

MATERIALS TODAY COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Physical

Synthesis of amine-modified graphene integrated membrane as protocols for simultaneous rejection of hydrocarbons pollutants, metal ions, and salts from water

Ali Alkenani et al.

Summary: Efficient membranes synthesized by integrating amine-modified graphene have shown significant improvement in permeability and separation capacity against organic contaminants, heavy metals, and salts in water treatment.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Add to Collection

Article Chemistry, Physical

Global trends in technologies and nanomaterials for removal of sulfur organic compounds: Clean energy and green environment

Tawfik A. Saleh

Summary: This review investigates various methods, adsorbents, and catalysts used for the elimination of sulfur compounds, and presents an overview of emerging technologies for ultra deep desulfurization to obtain ultra-low-sulfur fuels. The development of robust adsorbents and nano materials with ideal regeneration approaches is necessary to establish the capabilities of desulfurization processes. This review provides essential references and future directions for developing desulfurization technologies and materials for practical applications.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Add to Collection

Article Environmental Sciences

Boron removal from synthetic brines and oilfield produced waters using aluminum electrocoagulation

Ming Chen et al.

Summary: This study investigated the feasibility of using aluminum electrocoagulation (EC) technology to remove high boron (B) levels from oilfield produced waters. The results showed that B removal during EC was more effective than when aluminum hydroxide solids were exposed to B solutions. Adjusting parameters such as current, total dissolved solids, temperature, pH, etc., can lead to higher B removal efficiency. Additionally, B removal increased with increased current loading and time, but too high of a current loading limited the removal efficiency.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Add to Collection

Article Engineering, Environmental

Amyloid-based carbon aerogels for water purification

Mohammad Peydayesh et al.

Summary: The study shows that transforming proteins into amyloids can greatly enhance the capability of protein-based carbon aerogels in removing contaminants from water. These carbon aerogels have excellent removal efficiencies for heavy metals and can be reused for multiple cycles, indicating their potential as an efficient, sustainable, and inexpensive solution for water purification.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Energy & Fuels

Advanced trends of shale inhibitors for enhanced properties of water-based drilling fluid

Tawfik A. Saleh

Summary: Water-based mud (WBM) is an environmentally friendly drilling fluid but can cause shale swelling; additives are used to inhibit shale swelling and improve rheological and filtration properties; nanomaterials have emerged as promising alternatives for enhancing drilling fluid properties under extreme drilling conditions.

UPSTREAM OIL AND GAS TECHNOLOGY (2022)

Add to Collection

Article Engineering, Environmental

Glycine functionalized boron nitride nanosheets with improved dispersibility and enhanced interaction with matrix for thermal composites

Xiaojuan Tian et al.

Summary: A simple and green amino acid-assisted ball milling exfoliation process was proposed to prepare highly hydrophilic glycine-functionalized hexagonal boron nitride nanosheets (BNNS-Gly). These BNNS-Gly demonstrated significantly improved thermal conductivity in water, epoxy resin, and cellulose, showing great potential for enhancing thermal properties in composites.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Environmental Sciences

Efficient removal of cadmium ions from water by adsorption on a magnetic carbon aerogel

Yingchao Li et al.

Summary: A magnetic carbon aerogel (MCA) with high specific surface area and excellent sorption properties for Cd(II) ions was successfully synthesized in this study. The MCA removed cadmium ions from water through electrostatic adsorption and complexation, and could be easily separated and recovered due to the presence of Fe(3)O(4) nanoparticles. This study provides a promising and efficient technology for removing Cd(II) ions from aqueous solutions.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Add to Collection

Article Environmental Sciences

A functionalized bio-based material with abundant mesopores and catechol groups for efficient removal of boron

Nan Nan Xia et al.

Summary: LS-CPAM-TA is an mesoporedominated bio-based material with abundant catechol groups, showing efficient removal of boron. Its mesoporous structure not only enhances the exposure of catechol groups in TA, but also improves the fast mass transport of boron.

CHEMOSPHERE (2021)

Add to Collection

Article Engineering, Chemical

High-selective cyclic adsorption and magnetic recovery performance of magnetic lithium-aluminum layered double hydroxides (MLDHs) in extracting from ultrahigh Mg/Li+ ratio brines

Jun Chen et al.

Summary: The study demonstrated the feasibility of efficient lithium extraction from low-grade brines using magnetic Li/Al layered double hydroxides (MLDHs), which can selectively adsorb Li+ with high capacity. With Fe3O4 nanoparticles as magnetic cores, MLDHs showed great potential in industrial lithium extraction with rapid recovery and long-term recycling capabilities.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Synthesis of amine functionalization carbon nanotube-low symmetry porphyrin derivatives conjugates toward dye and metal ions removal

Tawfik A. Saleh et al.

Summary: Carbon nanotubes were functionalized with amine groups and conjugated with prophyrine derivatives to increase active sites. Compound 3 showed better adsorption efficiency for methylene blue at different pH values, achieving high efficiency when the adsorbent dosage increased. The adsorption mechanism involved non-electrostatic and electrostatic interactions, making the material effective for simultaneous adsorption of MB and toxic metal ions.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Chemistry, Physical

Glucose and glycidol grafted polyacrylonitrile particles by hydrothermal synthesis for enriched boron from aqueous solution

Qinglong Luo et al.

Summary: The study focused on improving polyacrylonitrile by adding ethylenediamine and polyethyleneimine to prepare boron adsorbents with polyhydroxy structure. The experimental results showed that these adsorbents exhibited excellent boron adsorption performance and could effectively enrich boron in salt lakes.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Pinwheel-Shaped Tetranuclear Organoboron Catalysts for Perfectly Alternating Copolymerization of CO2 and Epichlorohydrin

Guan-Wen Yang et al.

Summary: This study presents pinwheel-shaped organoboron catalysts for the copolymerization of epichlorohydrin and CO2, achieving high polymer selectivity and quantitative CO2 uptake under mild conditions. The produced poly(chloropropylene carbonate) exhibits the highest molecular weight and glass transition temperature reported to date. The metal-free catalyst shows robust performance and potential for advancing CO2-based polycarbonates.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Chemistry, Physical

Facile preparation of fibrous glycidol-containing adsorbent for boron removal from solutions by radiation-induced grafting of poly(vinylamine) and functionalisation

Haruna Kolawole Afolabi et al.

Summary: A boron-selective adsorbent was prepared through radiation induced graft copolymerization, demonstrating excellent adsorption properties with controlled content of hydrolyzed poly(N-vinylformamide) grafts. The adsorbent showed appealing stability and high adsorption capacity, making it highly effective for boron removal from aqueous solutions.

RADIATION PHYSICS AND CHEMISTRY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Isotherms, kinetics, and thermodynamics of boron adsorption on fibrous polymeric chelator containing glycidol moiety optimized with response surface method

Haruna Kolawole Afolabi et al.

Summary: A fibrous boron chelator, PE/PP-g-PVAm-G, was prepared by grafting NVF onto PE/PP non-woven sheet and immobilizing glycidol moiety. The chelator showed high boron selectivity and efficient regeneration after adsorption/desorption cycles, making it promising for boron removal from aqueous media. The optimization of glycidol density and investigation of boron adsorption isotherms, kinetics, and thermodynamic behavior were also conducted.

ARABIAN JOURNAL OF CHEMISTRY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Mechanically Flexible Carbon Aerogel with Wavy Layers and Springboard Elastic Supporting Structure for Selective Oil/Organic Solvent Recovery

Jiran Dong et al.

Summary: The study proposes a novel strategy to fabricate a 3D elastic reduced graphene oxide-cross-linked carbon aerogel using cellulose nanocrystals and prehydrolysis liquor. The carbon aerogel demonstrates ultralightness, supercompression, superelasticity, high absorption capacity for oily contaminants, good recyclability, and shows potential in oil cleanup and pollution remediation applications.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Review Engineering, Environmental

Recent advances in adsorption and coagulation for boron removal from wastewater: A comprehensive review

Jui-Yen Lin et al.

Summary: The anthropogenic emission of boron to rivers has posed a serious threat to water quality and ecosystems, but can be effectively removed through adsorption and coagulation methods. Boron sources mainly include coal-fired and geothermal power plants, as well as oil/gas extraction activities. Various types of adsorbents and coagulants, reaction mechanisms, progress in the past 5 years, and future research prospects and improvements have been discussed comprehensively in this review.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Preparation of layered double hydroxide intercalated by Gallic acid for boron adsorption

Liang Cai et al.

Summary: In this study, GA-LDH material was synthesized for borate acid adsorption and achieved a high adsorption capacity under optimized conditions, showing better adsorption performance compared to conventional materials. The research on adsorption mechanism and thermodynamics revealed the complex reaction process of boron adsorption by GA-LDH.

JOURNAL OF WATER PROCESS ENGINEERING (2021)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Hydrothermal synthesis of hydroxyl terminated polymer boron adsorbents

Qinglong Luo et al.

Summary: TRIS and glucose functionalized polymers were synthesized by hydrothermal method for boron adsorption, showing best performance at pH = 8, with strong resistance to ion interference and cycle life, suitable for environmental boron removal and boron extraction from salt lake.

JOURNAL OF SOLID STATE CHEMISTRY (2021)

Add to Collection

Article Biotechnology & Applied Microbiology

Protocols for synthesis of nanomaterials, polymers, and green materials as adsorbents for water treatment technologies

Tawfik A. Saleh

Summary: Water pollution caused by various pollutants is a critical global issue, and the development of organized protocols and procedures for the synthesis of new adsorbent materials is essential for addressing wastewater treatment challenges.

ENVIRONMENTAL TECHNOLOGY & INNOVATION (2021)

Add to Collection

Article Environmental Sciences

Evaluation of poly(ethylene diamine-trimesoyl chloride)-modified diatomite as efficient adsorbent for removal of rhodamine B from wastewater samples

Tawfik A. Saleh et al.

Summary: A novel adsorbent based on diatomite modified by ethylene diamine and trimesoyl chloride polymer was developed for efficient removal of rhodamine B dye from wastewater. The adsorbent showed high adsorption capacity and good recyclability for rhodamine B.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Nanorod-Like Polymer Adsorbents with Intermediate Dihydroxy Functional Groups for Efficient Boron Removal

Rui Sheng et al.

Summary: This study involves the preparation of short rod-like adsorbents with excellent boron adsorption capacities by grafting TRIS and APD onto the polymer Poly(VBC-DVB), which form stable six-membered ring complexes and show potential applications in boron removal in neutral and weakly alkaline solutions.

CHEMISTRYSELECT (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Optimization of boron adsorption from desalinated seawater onto UiO-66-NH2/GO composite adsorbent using response surface methodology

Zijie Wang et al.

Summary: A composite adsorbent named UiO-66-NH2/GO was successfully prepared and used as a boron adsorbent for the treatment of desalinated seawater, showing good removal ability for low concentration boron and good reusability. After optimization, the boron adsorption reached 26.45 mg/g under specific conditions.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Engineering, Chemical

Surface-initiated ATRP of glycidyl methacrylate in the presence of divinylbenzene on porous polystyrene-based resins for boron adsorption

Jinmi Jung et al.

DESALINATION (2020)

Add to Collection

Article Engineering, Environmental

Synthesis of polyimide-modified carbon nanotubes as catalyst for organic pollutant degradation via production of singlet oxygen with peroxymonosulfate without light irradiation

Mingyu Wei et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Engineering, Chemical

Boron removal and reclamation by magnetic magnetite (Fe3O4) nanoparticle: An adsorption and isotopic separation study

Tao Chen et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Hydrothermal deposition of titanate on biomass carbonaceous aerogel to prepare novel biomass adsorbents for Rb+ and Cs+

Kexin Li et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)

Add to Collection

Article Environmental Sciences

Analysis of the pore structure characteristics of freeze-thawed saline soil with different salinities based on mercury intrusion porosimetry

Jiaqi Wang et al.

ENVIRONMENTAL EARTH SCIENCES (2020)

Add to Collection

Article Environmental Sciences

Green preparation of activated carbon from pomegranate peel coated with zero-valent iron nanoparticles (nZVI) and isotherm and kinetic studies of amoxicillin removal in water

Imran Ali et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)

Add to Collection

Article Biotechnology & Applied Microbiology

Nanomaterials: Classification, properties, and environmental toxicities

Tawfik A. Saleh

ENVIRONMENTAL TECHNOLOGY & INNOVATION (2020)

Add to Collection

Article Environmental Sciences

Cyclodextrin derivatives used for the separation of boron and the removal of organic pollutants

Qinglong Luo et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A novel silica supported chitosan/glutaraldehyde as an efficient sorbent in solid phase extraction coupling with HPLC for the determination of Penicillin G from water and wastewater samples

Mohammad Hassan Mahmoudian et al.

ARABIAN JOURNAL OF CHEMISTRY (2020)

Add to Collection

Article Engineering, Environmental

Superhydrophilic versus normal polydopamine coating: A superior and robust platform for synergistic antibacterial and antithrombotic properties

Linhua Li et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Effective adsorptive removal of reactive dyes by magnetic chitosan nanoparticles: Kinetic, isothermal studies and response surface methodology

Jalil Jaafari et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Engineering, Environmental

Optimization of preparation conditions for biochar derived from water hyacinth by using response surface methodology (RSM) and its application in Pb2+ removal

Runjuan Zhou et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Add to Collection

Article Chemistry, Inorganic & Nuclear

One step integration of plasmonic Ag2CrO4/Ag/AgCl into HKUST-1-MOF as novel visible-light driven photocatalyst for highly efficient degradation of mixture dyes pollutants: Its photocatalytic mechanism and modeling

S. Jalali et al.

POLYHEDRON (2019)

Add to Collection

Article Engineering, Chemical

Boron adsorption removal by commercial and modified activated carbons

Joanna Kluczka et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2019)

Add to Collection

Article Engineering, Environmental

Degradation of dimethyl phthalate using persulfate activated by UV and ferrous ions: optimizing operational parameters mechanism and pathway

Mojtaba Yegane Badi et al.

JOURNAL OF ENVIRONMENTAL HEALTH SCIENCE AND ENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

Effect of modification by five different acids on pumice stone as natural and low-cost adsorbent for removal of humic acid from aqueous solutions - Application of response surface methodology

Hamed Soleimani et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Nanoscale Surface Compositions and Structures Influence Boron Adsorption Properties of Anion Exchange Resins

G. N. Manjunatha Reddy et al.

LANGMUIR (2019)

Add to Collection

Article Chemistry, Physical

Phenol adsorption on scoria stone as adsorbent - Application of response surface method and artificial neural networks

Kiomars Sharafi et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Optimization of polyethylene/polypropylene/alkali modified wheat straw composites for packaging application using RSM

Shobhit Dixit et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Functionalized Porous Aromatic Frameworks as High-Performance Adsorbents for the Rapid Removal of Boric Acid from Water

Jovan Kamcev et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Engineering, Environmental

Removal of boron from water using adsorbents derived from waste tire rubber

Elkhatab Babiker et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)

Add to Collection

Article Engineering, Environmental

Adsorption of boron by CA@KH-550@EPH@NMDG (CKEN) with biomass carbonaceous aerogels as substrate

Li Sun et al.

JOURNAL OF HAZARDOUS MATERIALS (2018)

Add to Collection

Article Engineering, Multidisciplinary

Investigation of pore size distributions of coals with different structures by nuclear magnetic resonance (NMR) and mercury intrusion porosimetry (MIP)

Xiangchen Li et al.

MEASUREMENT (2018)

Add to Collection

Article Engineering, Environmental

Synthesis of polyamide grafted carbon microspheres for removal of rhodamine B dye and heavy metals

Tawfik A. Saleh et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2018)

Add to Collection

Article Chemistry, Physical

Synthesis of glycopolymer nanosponges with enhanced adsorption performances for boron removal and water treatment

Xueping Liao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Engineering, Environmental

Mechanism and kinetics of aqueous boron removal using MgO

Tomohito Kameda et al.

JOURNAL OF WATER PROCESS ENGINEERING (2018)

Add to Collection

Article Chemistry, Applied

ZrO2-Carbon Nanotubes Composite Sorbent for Treatment of Aqueous Solutions to Remove Boron

M. A. Myachina et al.

RUSSIAN JOURNAL OF APPLIED CHEMISTRY (2017)

Add to Collection

Article Engineering, Chemical

A spherical N-methyl-D-glucamine-based hybrid adsorbent for highly efficient adsorption of boric acid from water

Xi Zhang et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Metal-organic frameworks (MOFs) as highly efficient agents for boron removal and boron isotope separation

Jiafei Lyu et al.

RSC ADVANCES (2017)

Add to Collection

Article Chemistry, Applied

Radiation synthesis and performance of novel cellulose-based microsphere adsorbents for efficient removal of boron (III)

Siqi Liu et al.

CARBOHYDRATE POLYMERS (2017)

Add to Collection

Article Engineering, Chemical

Application of response surface methodology for statistical analysis, modeling, and optimization of malachite green removal from aqueous solutions by manganese-modified pumice adsorbent

Amir Karami et al.

DESALINATION AND WATER TREATMENT (2017)

Add to Collection

Article Biotechnology & Applied Microbiology

A comparative study of anaerobic fixed film baffled reactor and up-flow anaerobic fixed film fixed bed reactor for biological removal of diethyl phthalate from wastewater: a performance, kinetic, biogas, and metabolic pathway study

Samira Yousefzadeh et al.

BIOTECHNOLOGY FOR BIOFUELS (2017)

Add to Collection

Article Chemistry, Physical

Preparation of carbon nanotubes/graphene hybrid aerogel and its application for the adsorption of organic compounds

Chunchun Wang et al.

CARBON (2017)

Add to Collection

Article Engineering, Biomedical

Zwitterionic polymer functionalization of polysulfone membrane with improved antifouling property and blood compatibility by combination of ATRP and click chemistry

Tao Xiang et al.

ACTA BIOMATERIALIA (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient Lightweight Supercapacitor with Compression Stability

Kaiyuan Shi et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Add to Collection

Article Engineering, Chemical

Reuse of polycyclic aromatic hydrocarbons (PAHs) contaminated soil washing effluent by bioaugmentation/biostimulation process

Farzaneh Gharibzadeh et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2016)

Add to Collection

Article Engineering, Environmental

The study of non-linear kinetics and adsorption isotherm models for Acid Red 18 from aqueous solutions by magnetite nanoparticles and magnetite nanoparticles modified by sodium alginate

Zohre Berizi et al.

WATER SCIENCE AND TECHNOLOGY (2016)

Add to Collection

Article Chemistry, Physical

Biomass-Derived Porous Carbon Materials: Synthesis and Catalytic Applications

Sudipta De et al.

CHEMCATCHEM (2015)

Add to Collection

Article Engineering, Chemical

Boron removal from water with fractionized Amber lite IRA743 resin

Nawaf Bin Darwish et al.

DESALINATION (2015)

Add to Collection

Article Chemistry, Physical

Surface characterization and sorption efficacy of tire-obtained carbon: experimental and semiempirical study of rhodamine B adsorption

Tawfik A. Saleh et al.

SURFACE AND INTERFACE ANALYSIS (2015)

Add to Collection

Article Engineering, Environmental

Adsorption of boron on calcined AlMg layered double hydroxide from aqueous solutions. Mechanism and effect of operating conditions

E. D. Isaacs-Paez et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Formation of a Eu(III) borate solid species from a weak Eu(III) borate complex in aqueous solution

Juliane Schott et al.

DALTON TRANSACTIONS (2014)

Add to Collection

Article Chemistry, Applied

Hydrophobic silica aerogel reinforced with carbon nanotube for oils removal

Tao Sun et al.

JOURNAL OF POROUS MATERIALS (2014)

Add to Collection

Article Engineering, Environmental

Preparation of banana frond activated carbon by microwave induced activation for the removal of boron and total iron from landfill leachate

K. Y. Foo et al.

CHEMICAL ENGINEERING JOURNAL (2013)

Add to Collection

Article Engineering, Chemical

Synthesis, characterization and application of a novel silica based adsorbent for boron removal

Lu Xu et al.

DESALINATION (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.