Related references
Note: Only part of the references are listed.Shape optimization of orthopedic porous scaffolds to enhance mechanical performance
Ali H. Foroughi et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2022)
A time-dependent mechanobiology-based topology optimization to enhance bone growth in tissue scaffolds
Chi Wu et al.
JOURNAL OF BIOMECHANICS (2021)
Analytical model for the prediction of permeability of triply periodic minimal surfaces
Reduan Asbai-Ghoudan et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)
Optimal placement of fixation system for scaffold-based mandibular reconstruction
Ben M. Ferguson et al.
Journal of the Mechanical Behavior of Biomedical Materials (2021)
Parallelized optimization design of bumper systems under multiple low-speed impact loads
Guangyong Sun et al.
THIN-WALLED STRUCTURES (2021)
Structural optimization of 3D-printed patient-specific ceramic scaffolds for in vivo bone regeneration in load-bearing defects
Pablo Blazquez-Carmona et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)
A machine learning-based multiscale model to predict bone formation in scaffolds
Chi Wu et al.
NATURE COMPUTATIONAL SCIENCE (2021)
3D printing of Haversian bone-mimicking scaffolds for multicellular delivery in bone regeneration
Meng Zhang et al.
SCIENCE ADVANCES (2020)
A modular design strategy to integrate mechanotransduction concepts in scaffold-based bone tissue engineering
Ali Entezari et al.
ACTA BIOMATERIALIA (2020)
Micro-CT based modelling for characterising injection-moulded porous titanium implants
Junning Chen et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN BIOMEDICAL ENGINEERING (2017)
Multi-objective and multi-case reliability-based design optimization for tailor rolled blank (TRB) structures
Guangyong Sun et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2017)
Effects of bone substitute architecture and surface properties on cell response, angiogenesis, and structure of new bone
F. S. L. Bobbert et al.
JOURNAL OF MATERIALS CHEMISTRY B (2017)
Bone regeneration in 3D printing bioactive ceramic scaffolds with improved tissue/material interface pore architecture in thin-wall bone defect
Huifeng Shao et al.
BIOFABRICATION (2017)
Additive manufacturing methods and modelling approaches: a critical review
H. Bikas et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Numerical investigation of the mechanical properties of the additive manufactured bone scaffolds fabricated by FDM: The effect of layer penetration and post-heating
S. Naghieh et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
In vitro and in vivo study of additive manufactured porous Ti6Al4V scaffolds for repairing bone defects
Guoyuan Li et al.
SCIENTIFIC REPORTS (2016)
Design and Fabrication of 3D printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects
Seyed-Iman Roohani-Esfahani et al.
SCIENTIFIC REPORTS (2016)
Fracture behaviors of ceramic tissue scaffolds for load bearing applications
Ali Entezari et al.
SCIENTIFIC REPORTS (2016)
Crashworthiness design for functionally graded foam-filled bumper beam
Zhi Xiao et al.
ADVANCES IN ENGINEERING SOFTWARE (2015)
Multiobjective robust design optimization of fatigue life for a truck cab
Jianguang Fang et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2015)
Optimization of scaffold design for bone tissue engineering: A computational and experimental study
Marta R. Dias et al.
MEDICAL ENGINEERING & PHYSICS (2014)
Robust optimization of foam-filled thin-walled structure based on sequential Kriging metamodel
Guangyong Sun et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2014)
ESTIMATING THE UNCERTAINTY OF TENSILE STRENGTH MEASUREMENT FOR A PHOTOCURED MATERIAL PRODUCED BY ADDITIVE MANUFACTURING
Stanislaw Adamczak et al.
METROLOGY AND MEASUREMENT SYSTEMS (2014)
Unique microstructural design of ceramic scaffolds for bone regeneration under load
S. I. Roohani-Esfahani et al.
ACTA BIOMATERIALIA (2013)
Multiobjective reliability-based optimization for design of a vehicledoor
Jianguang Fang et al.
FINITE ELEMENTS IN ANALYSIS AND DESIGN (2013)
A Comparative study on multiobjective reliable and robust optimization for crashworthiness design of vehicle structure
Xianguang Gu et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2013)
Prediction of permeability of regular scaffolds for skeletal tissue engineering: A combined computational and experimental study
S. Truscello et al.
ACTA BIOMATERIALIA (2012)
Direct ink writing of highly porous and strong glass scaffolds for load-bearing bone defects repair and regeneration
Qiang Fu et al.
ACTA BIOMATERIALIA (2011)
Microstructure design of biodegradable scaffold and its effect on tissue regeneration
Yuhang Chen et al.
BIOMATERIALS (2011)
Design Optimization of Scaffold Microstructures Using Wall Shear Stress Criterion Towards Regulated Flow-Induced Erosion
Yuhang Chen et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2011)
Crashworthiness design of vehicle by using multiobjective robust optimization
Guangyong Sun et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2011)
Effect of Polycaprolactone Scaffold Permeability on Bone Regeneration In Vivo
Anna G. Mitsak et al.
TISSUE ENGINEERING PART A (2011)
On stiffness of scaffolds for bone tissue engineering-a numerical study
Stefan Sturm et al.
JOURNAL OF BIOMECHANICS (2010)
Multiobjective robust optimization method for drawbead design in sheet metal forming
Guangyong Sun et al.
MATERIALS & DESIGN (2010)
Internal loads in the human tibia during gait
Tim Wehner et al.
CLINICAL BIOMECHANICS (2009)
Iliac crest reconstruction to reduce donor-site morbidity: technical note
Joseph Richard Dusseldorp et al.
EUROPEAN SPINE JOURNAL (2009)
Multiobjective Optimization Problems With Complicated Pareto Sets, MOEA/D and NSGA-II
Hui Li et al.
IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION (2009)
Donor site morbidity following iliac crest bone harvesting for cervical fusion: a comparison between minimally invasive and open techniques
Raymond Pollock et al.
EUROPEAN SPINE JOURNAL (2008)
A two-stage multi-objective optimisation of vehicle crashworthiness under frontal impact
Xingtao Liao et al.
INTERNATIONAL JOURNAL OF CRASHWORTHINESS (2008)
Computational design of tissue engineering scaffolds
Scott J. Hollister et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2007)
Framework for optimal design of porous scaffold microstructure by computational simulation of bone regeneration
T Adachi et al.
BIOMATERIALS (2006)
Porous scaffold design for tissue engineering
SJ Hollister
NATURE MATERIALS (2005)
Porosity of 3D biomaterial scaffolds and osteogenesis
V Karageorgiou et al.
BIOMATERIALS (2005)
A novel method for biomaterial scaffold internal architecture design to match bone elastic properties with desired porosity
CY Lin et al.
JOURNAL OF BIOMECHANICS (2004)
Design for six sigma through robust optimization
PN Koch et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2004)
Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints
SJ Hollister et al.
BIOMATERIALS (2002)
Share Paper
