☆ 4.7 Article

Strong and tough laminated ceramics prepared from ceramic foams

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Bioinspired damage tolerant diamond-metal laminates by alternating CVD and PVD processes

Timo Fromm et al.

Summary: A novel process was developed for fabricating diamond-metal laminates, with the successful creation of diamond-based biomimetic brick-and-mortar structures. The laminates exhibit high nominal strengths exceeding other ceramic-metal composites by at least a factor of two, with fracture energy in a medium range. Diamond layers provide damage tolerance in the laminates.

MATERIALS & DESIGN (2022)

Add to Collection

Article Materials Science, Ceramics

Anorthite-based transparent glass-ceramic glaze for ceramic tiles: Preparation and crystallization mechanism

Shaohua Wang et al.

Summary: A series of high hardness anorthite-based transparent glass-ceramic glazes were successfully developed for ceramic tiles, showing excellent transparency and hardness. The anorthite crystals in the glazes were lamellar-shaped, and could crystallize directly from the frit glaze at 850 degrees C.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

Add to Collection

Article Materials Science, Ceramics

Sm0.5Sr0.5CoO3-δ based nacre-like ceramic with enhanced thermal shock resistance for high temperature solar thermal application

Wenqing Li et al.

Summary: A nacre-like structure perovskite oxide Sm0.5Sr0.5CoO3-delta (SSC) ceramic was prepared using tape casting, solid-state reaction, and laminating method, showing similar optical properties to bulk SSC but better thermal shock resistance. Under high concentration sunlight, the nacre-like SSC maintained integrity and reached an equilibrium temperature of around 870 degrees Celsius, making it a promising candidate for high-temperature solar thermal applications.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Experiment and simulation analysis on thermal shock resistance of laminated ceramics with graphite and boron nitride interfaces

Zhongya Zhang et al.

Summary: Experimental and theoretical analyses showed that the graphite interface layer had a greater impact on the thermal shock resistance of laminated ZrB2-SiC ceramics, mainly due to its higher thermal conductivity and smaller difference in thermal expansion coefficient.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Aqueous tape casting of super-hard B4C laminates with rGO-enriched reinforcing interlayers

Cristina Ojalvo et al.

Summary: Superhard B4C parts with microarchitectures composed of ceramic layers and evenly-spaced rGO-enriched reinforcing interlayers were successfully fabricated for the first time in this study. The multilayered laminates produced through aqueous colloidal processing and coating techniques demonstrated excellent hardness and crack propagation resistance.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Preparation and mechanical properties of laminated B4C-TiB2/BN ceramics

Bo Wang et al.

Summary: Laminated B4C-TiB2 ceramics with h-BN interface layers were successfully prepared using roll forming and tape casting techniques. Increasing the number of h-BN layers can effectively enhance the fracture toughness of the ceramics, resulting in significantly improved performance compared to monolithic B4C ceramics.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Structural design and toughening mechanism of laminated graphene ceramic tool materials

Benshuai Chen et al.

Summary: By designing and preparing laminated ceramic tool materials with graphene, it was found that their toughness and flexural strength were significantly improved compared to monolithic Al2O3-TiB2 ceramic, mainly due to the synergistic action of graphene and residual compressive stress leading to multi-scale deflection of cracks and a change in fracture mode.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Fabrication, mechanical properties and fracture behaviors of the laminated Al2O3-ZrB2-MgO / Al2O3-TiN-MgO ceramic composite

Changxia Liu et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Ceramics

Design of damage tolerant and crack-free layered ceramics with textured microstructure

Anna-Katherina Hofer et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Materials Science, Ceramics

Development and evaluation of Al2O3-ZrO2 composite processed by digital light 3D printing

Tianqi Zheng et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Ceramics

Effects of micro and macro features on the thermal shock resistance of laminated Al2O3-MgO composites

Changxia Liu et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Ceramics

Bioinspired alumina/reduced graphene oxide fibrous monolithic ceramic and its fracture responses

Shuna Chen et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

Add to Collection

Article Materials Science, Ceramics

Characterisation of mechanical and fracture behaviour of Al2O3/ZrO2/BaTiO3 laminate by indentation

Hynek Hadraba et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrastrong Hierarchical Porous Materials via Colloidal Assembly and Oxidation of Metal Particles

Wenlong Huo et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Materials Science, Ceramics

High toughness and R-curve behaviour of laminated SiC/graphite ceramics

Chuncheng Wei et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Engineering, Multidisciplinary

Cost-effective fabrication of bio-inspired nacre-like composite materials with high strength and toughness

Hongbo Wan et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Materials Science, Ceramics

Effect of residual stresses to the crack path in alumina/zirconia laminates

Zdenek Chlup et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Engineering, Mechanical

A study on the failure behavior of Al2O3-Ni micro-layered beams under three point bending

Mengwen Zhang et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

Add to Collection

Article Materials Science, Ceramics

Fibrous monolithic ceramic with a single alumina phase: Fracture and high-temperature tribological behaviors

Yunfeng Su et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Ceramics

Processing and properties of tape-cast alumina/zirconia laminates composites

Micheline dos Reis Araujo et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Ceramics

Microstructure and mechanical properties of nacre-like alumina toughened by graphene oxide

Lu Wang et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Ceramics

In situ synthesis of three-dimensional nanofiber-knitted ceramic foams via reactive sintering silicon foams

Wenlong Huo et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Strong and tough metal/ceramic micro-laminates

Claudio Ferraro et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Materials Science, Ceramics

R-curve behavior and flexural strength of zirconia-toughened alumina and partially stabilized zirconia composite laminates

Diego Blaese et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Materials Science, Ceramics

Fabrication of dense nano-laminated tungsten carbide materials doped with Cr3C2/VC through two-step sintering

Jialin Sun et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

Add to Collection

Article Materials Science, Ceramics

Structural design and energy absorption mechanism of laminated SiC/BN ceramics

Mengyong Sun et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

Add to Collection

Article Materials Science, Ceramics

A novel design to produce high-strength and high-toughness alumina self-lubricated composites with enhanced thermal-shock resistance-Part I: Mechanical properties and thermal shock behavior of Al2O3/Mo-Al2O3 laminated composites

Junjie Song et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Add to Collection

Article Materials Science, Ceramics

Toward seashells under stress: Bioinspired concepts to design tough layered ceramic composites

Raul Bermejo

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Add to Collection

Article Materials Science, Ceramics

Ceramic laminates with improved mechanical reliability by tailoring the porosity of the constituting layers

Vincenzo M. Sglavo et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Add to Collection

Article Materials Science, Ceramics

Dilatometric study of anisotropic sintering of alumina/zirconia laminates with controlled fracture behaviour

Karel Maca et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Add to Collection

Article Materials Science, Ceramics

Optimum control of the mechanical properties of alumina/nickel laminated composites

Hengzhong Fan et al.

CERAMICS INTERNATIONAL (2017)

Add to Collection

Article Chemistry, Physical

Evolution and mechanism of crack propagation method of interface in laminated Ti/Al2O3 composite

Chao Wu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Materials Science, Ceramics

Al2O3 Nanoparticulate LZS Glass-Ceramic Matrix Composites for Production of Multilayered Materials

Sabrina Arcaro et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Porous silica ceramics with uniform pores from the in-situ foaming process of silica poly-hollow microspheres in inert atmosphere

Xiao-Yan Zhang et al.

MATERIALS LETTERS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

R-curve behavior of laminated ZrB2-SiC ceramic with strong interfaces

Peng Zhou et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2015)

Add to Collection

Article Materials Science, Ceramics

Influence of structural parameters and transition interface on the fracture property of Al2O3/Mo laminated composites

Junjie Song et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)

Add to Collection

Article Materials Science, Ceramics

Laminated alumina/zirconia ceramic composites prepared by electrophoretic deposition

Hynek Hadraba et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

Add to Collection

Article Engineering, Chemical

Fabrication and mechanical properties of Al2O3-Si3N4/ZrO2-Al2O3 laminated composites

Guofeng Wang et al.

POWDER TECHNOLOGY (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.