Related references
Note: Only part of the references are listed.Effect of layer thickness on the flexural strength of multiple-unit laser-sintered metal frameworks
Necati Kaleli et al.
JOURNAL OF PROSTHETIC DENTISTRY (2022)
Effect of lamination layer thickness and abutment preparation on the fit of Co-Cr multi-unit prostheses fabricated by additive manufacturing: An in vitro study
Elie E. Daou
JOURNAL OF PROSTHETIC DENTISTRY (2022)
Chemical composition, surface roughness, and ceramic bond strength of additively manufactured cobalt-chromium dental alloys
Marta Revilla-Leon et al.
JOURNAL OF PROSTHETIC DENTISTRY (2021)
Silica-Based Infiltrations for Enhanced Zirconia-Resin Interface Toughness
N. C. Ramos et al.
JOURNAL OF DENTAL RESEARCH (2019)
Marginal and internal fit of pre-sintered Co-Cr and zirconia 3-unit fixed dental prostheses as measured using microcomputed tomography
Elie E. Daou et al.
JOURNAL OF PROSTHETIC DENTISTRY (2018)
Effect of annealing procedure on the bonding of ceramic to cobalt-chromium alloys fabricated by rapid prototyping
Ayca Tulga
JOURNAL OF PROSTHETIC DENTISTRY (2018)
Effect of layered manufacturing techniques, alloy powders, and layer thickness on metal-ceramic bond strength
Orhun Ekren et al.
JOURNAL OF PROSTHETIC DENTISTRY (2018)
Influence of thermo-mechanical cycling on porcelain bonding to cobalt-chromium and titanium dental alloys fabricated by casting, milling, and selective laser melting
Maja Antanasova et al.
JOURNAL OF PROSTHODONTIC RESEARCH (2018)
Effect of primer-cement systems with different functional phosphate monomers on the adhesion of zirconia to dentin
Dayanne Monielle Duarte Moura et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Comparative Analysis of Mechanical Properties and Metal-Ceramic Bond Strength of Co-Cr Dental Alloy Fabricated by Different Manufacturing Processes
Xingting Han et al.
MATERIALS (2018)
Porcelain bonding to novel Co-Cr alloys: Influence of interfacial reactions on phase stability, plasticity and adhesion
Kai Chun Li et al.
DENTAL MATERIALS (2016)
The metallurgy and processing science of metal additive manufacturing
W. J. Sames et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
Evaluation of metal-ceramic bond characteristics of three dental Co-Cr alloys prepared with different fabrication techniques
Hongmei Wang et al.
JOURNAL OF PROSTHETIC DENTISTRY (2016)
Effects of multiple firings on metal-ceramic bond strength of Co-Cr alloy fabricated by selective laser melting
Xiao-Wei Ren et al.
JOURNAL OF PROSTHETIC DENTISTRY (2016)
Surface chemistry of Ti6Al4V components fabricated using selective laser melting for biomedical applications
Jayasheelan Vaithilingam et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Comparison of the microstructure and phase stability of as-cast, CAD/CAM and powder metallurgy manufactured Co-Cr dental alloys
Kai Chun Li et al.
DENTAL MATERIALS (2015)
Defects-tolerant Co-Cr-Mo dental alloys prepared by selective laser melting.
B. Qian et al.
DENTAL MATERIALS (2015)
Effect of oxidation heat treatment on the bond strength between a ceramic and cast and milled cobalt-chromium alloys
Jieyin Li et al.
EUROPEAN JOURNAL OF ORAL SCIENCES (2015)
Shear bond strength of porcelain to a new millable alloy and a conventional castable alloy
Du-Hyeong Lee et al.
JOURNAL OF PROSTHETIC DENTISTRY (2015)
Corrosion resistance assessment of Co-Cr alloy frameworks fabricated by CAD/CAM milling, laser sintering, and casting methods
Suleyman Hakan Tuna et al.
JOURNAL OF PROSTHETIC DENTISTRY (2015)
Selective Laser Melting Technique of Co-Cr Dental Alloys: A Review of Structure and Properties and Comparative Analysis with Other Available Techniques
Theodoros Koutsoukis et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2015)
Differences in microstructure and properties between selective laser melting and traditional manufacturing for fabrication of metal parts: A review
Bo Song et al.
FRONTIERS OF MECHANICAL ENGINEERING (2015)
Metallurgical and interfacial characterization of PFM Co-Cr dental alloys fabricated via casting, milling or selective laser melting
Y. S. Al Jabbari et al.
DENTAL MATERIALS (2014)
The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy
Luke N. Carter et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Effect of molten pool boundaries on the mechanical properties of selective laser melting parts
Wen Shifeng et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
COMPARISON OF THE METAL-TO-CERAMIC BOND STRENGTHS OF FOUR NOBLE ALLOYS WITH PRESS-ON-METAL AND CONVENTIONAL PORCELAIN LAYERING TECHNIQUES
Mofida R. Khmaj et al.
JOURNAL OF PROSTHETIC DENTISTRY (2014)
EVALUATION OF THE MECHANICAL PROPERTIES AND PORCELAIN BOND STRENGTH OF COBALT-CHROMIUM DENTAL ALLOY FABRICATED BY SELECTIVE LASER MELTING
Lin Wu et al.
JOURNAL OF PROSTHETIC DENTISTRY (2014)
ADHESION OF DENTAL PORCELAIN TO CAST, MILLED, AND LASER-SINTERED COBALT-CHROMIUM ALLOYS: SHEAR BOND STRENGTH AND SENSITIVITY TO THERMOCYCLING
Josep Serra-Prat et al.
JOURNAL OF PROSTHETIC DENTISTRY (2014)
Thermal fatigue resistance of H13 steel treated by selective laser surface melting and CrNi alloying
Xin Tong et al.
APPLIED SURFACE SCIENCE (2013)
Surface Properties and Corrosion Behavior of Co-Cr Alloy Fabricated with Selective Laser Melting Technique
Xian-zhen Xin et al.
CELL BIOCHEMISTRY AND BIOPHYSICS (2013)
Microstructures and mechanical properties of Co-29Cr-6Mo alloy fabricated by selective laser melting process for dental applications
Atsushi Takaichi et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2013)
Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting
Ahmed Hussein et al.
MATERIALS & DESIGN (2013)
Annealing of Co-Cr dental alloy: effects on nanostructure and Rockwell hardness
Simel Ayyildiz et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2013)
Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
K. N. Amato et al.
ACTA MATERIALIA (2012)
Metal-ceramic bond strength of Co-Cr alloy fabricated by selective laser melting
Nan Xiang et al.
JOURNAL OF DENTISTRY (2012)
Preliminary study on some properties of Co-Cr dental alloy formed by selective laser melting technique
Zhang Biao et al.
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2012)
Direct comparison of the bond strength results of the different test methods: A critical literature review
Susanne S. Scherrer et al.
DENTAL MATERIALS (2010)
Effect of preliminary irradiation on the bond strength between a veneering composite and alloy
Yoshifumi Matsumoto et al.
DENTAL MATERIALS JOURNAL (2010)
Mixed mode fracture of marble/adhesive interfaces
N. Rahbar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Influence of Surface Treatment on the Shear Bond Strength of Ceramics Fused to Cobalt-Chromium
Geraldo H. L. Lombardo et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2010)
Effect of testing methods on the bond strength of resin to zirconia-alumina ceramic: microtensile versus shear test
Luiz F. VALANDRO et al.
DENTAL MATERIALS JOURNAL (2009)
Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling
Petra C. Guess et al.
DENTAL MATERIALS (2008)
Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain
Tolga Akova et al.
DENTAL MATERIALS (2008)
Evaluation of bond strength of various margin ceramics to a zirconia ceramic
M. Erhan Comlekoglu et al.
JOURNAL OF DENTISTRY (2008)
Shear bond strength of a ceramic to Co-Cr alloys
Renato Morales Joias et al.
JOURNAL OF PROSTHETIC DENTISTRY (2008)
Comparison of two bond strength testing methodologies for bilayered all-ceramics
Mine Dundar et al.
DENTAL MATERIALS (2007)
Residual stresses in selective laser sintering and selective laser melting
Peter Mercelis et al.
RAPID PROTOTYPING JOURNAL (2006)
Shear bond strengths of a ceramic system to alternative metal alloys
RM de Melo et al.
JOURNAL OF PROSTHETIC DENTISTRY (2005)
Monotonic flexure and fatigue strength of composites for provisional and definitive restorations
SS Scherrer et al.
JOURNAL OF PROSTHETIC DENTISTRY (2003)