☆ 4.8 Article

Structure optimization of solvent-free Li4Ti5O12 electrodes by electrostatic spraying for lithium-ion capacitors

JOURNAL OF POWER SOURCES (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Flexible aqueous Ca-ion full battery with super-flat discharge voltage plateau

Panpan Wang et al.

Summary: This study utilized Sn-doped In2O3 as the aqueous Ca-ion battery anode, achieving considerable discharge capacity and a stable discharge voltage plateau. The Ca storage mechanism was elucidated through various characterization techniques. The flexible Ca-ion battery assembled in this work opens up new possibilities for practical applications in flexible and wearable electronics.

NANO RESEARCH (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Progress in solvent-free dry-film technology for batteries and supercapacitors

Yongxing Li et al.

Summary: This paper provides a comprehensive overview of the technical advantages, development process, principal mechanisms, and application fields of solvent-free dry film technology. It emphasizes powder spray and binder fibrillation as key methods with low-cost mass-production capability and provides detailed explanations of the associated preparation process. Analysis of patents and research papers reveals that these techniques are suitable for all solid-state batteries (ASSBs), suggesting potential for future development in solvent-free dry film technology.

MATERIALS TODAY (2022)

Add to Collection

Article Multidisciplinary Sciences

Extremely fast-charging lithium ion battery enabled by dual-gradient structure design

Lei-Lei Lu et al.

Summary: The poor rate capability of graphite anodes hampers the charging speed of lithium-ion batteries. This study presents a previously unreported dual-gradient structure design in the graphite anode, which improves the charging capability and achieves extremely fast-charging.

SCIENCE ADVANCES (2022)

Add to Collection

Article Chemistry, Physical

Designing electrode architectures to facilitate electrolyte infiltration for lithium-ion batteries

Abbos Shodiev et al.

Summary: Electrolyte infiltration is a critical step in Lithium-ion battery manufacturing, and it can be influenced by adjusting the porous mesostructure and dimensions of the electrodes and separator. By optimizing the porosity, porosity distribution, and particle size distribution of the active material, the electrolyte infiltration process can be improved, reducing both time and energy consumption in the manufacturing process.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Mass Balancing of Hybrid Ion Capacitor Electrodes: A Simple and Generalized Semiempirical Approach

Vishnu Surendran et al.

Summary: Hybrid ion capacitors (HICs) combine the advantages of batteries and supercapacitors, but achieving optimal mass balancing for full-cell HIC devices is challenging due to differences in specific capacities and rate capabilities of electrodes. A method to predict well-performing mass ratios for Na-HIC electrodes has been demonstrated, using a Ragone Plot Simulator to predict specific energy and power. The approach, validated using experimental data, serves as a design tool for selecting optimized HIC devices for various applications.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Mesoscopic Ti2Nb10O29 cages comprised of nanorod units as high-rate lithium-ion battery anode

Jinfeng Zeng et al.

Summary: Ti2Nb10O29 is considered as a potential anode material for lithium-ion batteries due to its unique mesoscopic structure, which effectively shortens the ion diffusion pathway and delivers high reversible capacity and rate capability.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Effects of binder content on low-cost solvent-free electrodes made by dry-spraying manufacturing for lithium-ion batteries

Enmeng Zhen et al.

Summary: In this study, solvent-free electrodes for lithium-ion batteries were prepared using electrostatic spraying. The effects of binder content on electrode performance were explored, showing that uniform distribution of binder and conductive agent leads to improved performance. Compared to conventional wet electrodes, solvent-free electrodes exhibit better electrochemical properties.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Review Energy & Fuels

A comprehensive review of lithium ion capacitor: development, modelling, thermal management and applications

Mahdi Soltani et al.

Summary: The article reviews the materials, electro-thermal model, lifetime model, thermal model, and thermal management system of the lithium ion capacitor (LIC). Various electro-chemical methods, equivalent circuit model, and fractional order model for LIC electro-thermal modeling are summarized. Different lifetime modeling methods and thermal management system design aspects are covered, along with potential applications of LIC technology with other high-energy devices for hybrid energy storage.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Optimization of the Electrode Properties for High-Performance Ni-Rich Li-Ion Batteries

Sangchai Sarawutanukul et al.

Summary: This study investigates the impact of optimized electrode microstructure on the performance of next-generation Ni-rich cathode materials, achieving excellent high-rate capacity retention, fast Li-ion diffusion, and low internal resistance in the 18650 cylindrical cells.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Binding mechanisms of PVDF in lithium ion batteries

Xuehu Zhong et al.

Summary: The study investigates the binding mechanism of PVDF in lithium ion batteries by simulation calculation and theoretical analysis. The results show different binding interactions between PVDF and LiFePO4 and between PVDF and Li(Ni1-x-yCoxMny)O2, providing insights for the development of new binders and the peeling of active materials in LIBs. Scanning electron microscopy and Auger electron spectroscopy analyses reveal the distribution of PVDF on the surfaces of active materials in LFP batteries and between Al and NCM in NCM batteries, with no chemical interaction detected among the surfaces of active materials, PVDF, and Al in both types of batteries.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Review Electrochemistry

A Minireview on High-Performance Anodes for Lithium-Ion Capacitors

Junsheng Zheng et al.

Summary: The paper discusses the challenges and attempts regarding lithium-ion capacitors (LICs), emphasizing the importance of selecting appropriate anode structures and optimizing solid-electrolyte interface (SEI) for performance enhancement.

BATTERIES & SUPERCAPS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Activating the I0/I+ redox couple in an aqueous I2-Zn battery to achieve a high voltage plateau

Xinliang Li et al.

Summary: This study demonstrates the activation of reversible redox behavior in iodine conversion batteries through electrolyte adjustment, achieving significant performance enhancements.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Lithiophilic polymer interphase anchored on laser-punched 3D holey Cu matrix enables uniform lithium nucleation leading to super-stable lithium metal anodes

Jiangmin Jiang et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Lithium Ion Battery Electrodes Made Using Dimethyl Sulfoxide (DMSO)-A Green Solvent

Ming Wang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Review Multidisciplinary Sciences

The Impact of Absorbed Solvent on the Performance of Solid Polymer Electrolytes for Use in Solid-State Lithium Batteries

Gabrielle Foran et al.

ISCIENCE (2020)

Add to Collection

Article Electrochemistry

Encapsulating Oxygen-Deficient TiNb24O62 Microspheres by N-Doped Carbon Nanolayer Boosts Capacity and Stability of Lithium-Ion Battery

Jiangmin Jiang et al.

BATTERIES & SUPERCAPS (2020)

Add to Collection

Article Electrochemistry

Highly conductive NMP-free carbon-coated nano-lithium titanate/carbon composite electrodes via SBR-assisted electrophoretic deposition

Marianna Uceda et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Strengthening the Electrodes for Li-Ion Batteries with a Porous Adhesive Interlayer through Dry-Spraying Manufacturing

Jin Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Design and Mechanisms of Asymmetric Supercapacitors

Yuanlong Shao et al.

CHEMICAL REVIEWS (2018)

Add to Collection

Article Engineering, Chemical

Technical and economic analysis of solvent-based lithium-ion electrode drying with water and NMP

David L. Wood et al.

DRYING TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Physical

Highly stable lithium ion capacitor enabled by hierarchical polyimide derived carbon microspheres combined with 3D current collectors

Jiangmin Jiang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Electrochemistry

The Role of Pre-Lithiation in Activated Carbon/Li4Ti5O12 Asymmetric Capacitors

Nansheng Xu et al.

ELECTROCHIMICA ACTA (2017)

Add to Collection

Article Chemistry, Physical

The importance of the electrode mass ratio in a Li-ion capacitor based on activated carbon and Li4Ti5O12

Sonia Dsoke et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Review Food Science & Technology

Electrostatic Coating Technologies for Food Processing

Sheryl A. Barringer et al.

ANNUAL REVIEW OF FOOD SCIENCE AND TECHNOLOGY, VOL 6 (2015)

Add to Collection

Article Chemistry, Physical

Preparation of Pt-Co nanoparticles by galvanostatic pulse electrochemical codeposition on in situ electrochemical reduced graphene nanoplates based carbon paper electrode for oxygen reduction reaction in proton exchange membrane fuel cell

Maryam Yaldagard et al.

APPLIED SURFACE SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

Enabling aqueous binders for lithium battery cathodes - Carbon coating of aluminum current collector

Italo Doberdo et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Second generation 'nanohybrid supercapacitor': Evolution of capacitive energy storage devices

Katsuhiko Naoi et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Graphene nanoplate-MnO2 composites for supercapacitors: a controllable oxidation approach

Huajie Huang et al.

NANOSCALE (2011)

Add to Collection

Article Engineering, Multidisciplinary

Effect of ambient relative humidity and surface modification on the charge decay properties of polymer powders in powder coating

R Sharma et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.