☆ 4.8 Review

Perspectives on strategies and techniques for building robust thick electrodes for lithium-ion batteries

JOURNAL OF POWER SOURCES (2022)

Related references

Note: Only part of the references are listed.
Article Engineering, Environmental

High-capacity, low-tortuosity LiFePO4-Based composite cathode enabled by self-supporting structure combined with laser drilling technology

Shaoping Wu et al.

Summary: By designing a self-supporting thick electrode with a uniform microchannel structure, the ion and electron transport of the electrode is improved, enhancing the rate capability and capacity retention of the electrode.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection
Review Chemistry, Multidisciplinary

From Materials to Cell: State-of-the-Art and Prospective Technologies for Lithium-Ion Battery Electrode Processing

Jianlin Li et al.

Summary: Electrode processing plays a crucial role in lithium-ion battery technologies, but has received less attention compared to materials development. This review outlines the steps in electrode processing, summarizes recent progress, analyzes interplays and constraints, and discusses prospective technologies.

CHEMICAL REVIEWS (2022)

Add to Collection
Article Multidisciplinary Sciences

The challenges and opportunities of battery-powered flight

Venkatasubramanian Viswanathan et al.

Summary: This Perspective explores the requirements and potential chemistries for battery-powered aircraft. The differences between flight and terrestrial needs are highlighted, with the major constraint for aviation being safe and usable specific energy.

NATURE (2022)

Add to Collection
Article Chemistry, Physical

Effect of crystallite geometries on electrochemical performance of porous intercalation electrodes by multiscale operando investigation

Yuting Luo et al.

Summary: This study used operando techniques to investigate the impact of electrode particle geometry on the phase transformations induced by lithiation in lithium-ion batteries. It found that the particle geometry affects the modulation of metastable phase regimes and electrode tortuosity, providing key design principles for intercalation cathodes.

NATURE MATERIALS (2022)

Add to Collection
Article Chemistry, Physical

Bio-Inspired Computational Design of Vascularized Electrodes for High-Performance Fast-Charging Batteries Optimized by Deep Learning

Chenxi Sui et al.

Summary: Biologically inspired vascularized porous electrodes can simultaneously address slow ionic transport and high voltage drop by introducing low tortuous channels and graded porosity. Structural optimization using artificial neural networks and an inverse-design searching library enhances charging capacity.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection
Article Chemistry, Physical

Unveiling the migration behavior of lithium ions in NCM/Graphite full cell via in operando neutron diffraction

Chaoqi Wang et al.

Summary: Utilizing in operando neutron diffraction technique, structural characteristics and lithium ion migration pathways of electrodes in LiNi0.5Co0.2Mn0.3O2 /Graphite full cell were revealed. The competition effect between delithiation and magnetic frustration affects the concentration of Li/Ni antisite defects in the cathode, while lithium ions diffuse via different hopping paths in different stages of charge. The study provides insights for designing an optimized pathway for achieving high-performance Li-ion batteries.

ENERGY STORAGE MATERIALS (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Low-Tortuosity Thick Electrodes with Active Materials Gradient Design for Enhanced Energy Storage

Jingyi Wu et al.

Summary: This study develops a low-tortuosity electrode with an active material gradient structure, which improves the energy density and rate capabilities of batteries. It provides insights into optimizing electrode microstructures for enhanced energy storage.

ACS NANO (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Interface-Adaptive Binder Enabled by Supramolecular Interactions for High-Capacity Si/C Composite Anodes in Lithium-Ion Batteries

Linlin Hu et al.

Summary: A novel interface-adaptive triblock polymer binder is proposed in this study, which improves the particle affinity and binder spreadability of Si and graphite particles through supramolecular interactions. By enhancing the interfacial interactions, the electrode interface is effectively stabilized and side reactions are minimized, resulting in a high reversible capacity and cycling stability for Si/C anodes.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Gradient Design for High-Energy and High-Power Batteries

Jingyi Wu et al.

Summary: This article presents the principles and decisive role of charge transport mechanisms in battery performance, with a discussion on the correlation between charge transport regulation and battery microstructure design. It summarizes the design strategies of gradient cathodes, lithium-metal anodes, and solid-state electrolytes. Future directions and perspectives of gradient design are provided to enable practically accessible high-energy and high-power-density batteries.

ADVANCED MATERIALS (2022)

Add to Collection
Article Electrochemistry

Microstructure evolution of lithium-ion battery electrodes at different states of charge: Deep learning-based segmentation

Yazheng Yang et al.

Summary: This study investigates the evolution of electrode microstructure by designing a mini-cylindrical battery and utilizing an image segmentation method. The relationship between electrode charge state and porosity/thickness is presented.

ELECTROCHEMISTRY COMMUNICATIONS (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Progress in solvent-free dry-film technology for batteries and supercapacitors

Yongxing Li et al.

Summary: This paper provides a comprehensive overview of the technical advantages, development process, principal mechanisms, and application fields of solvent-free dry film technology. It emphasizes powder spray and binder fibrillation as key methods with low-cost mass-production capability and provides detailed explanations of the associated preparation process. Analysis of patents and research papers reveals that these techniques are suitable for all solid-state batteries (ASSBs), suggesting potential for future development in solvent-free dry film technology.

MATERIALS TODAY (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Gradient Architecture Design in Scalable Porous Battery Electrodes

Xiao Zhang et al.

Summary: This study presents a gradient electrode design, and by comparing different orientations of the gradient electrodes, it is found that faster energy storage kinetics can be achieved with larger openings and more concentrated active material near the separator. This research deepens the understanding of structure-related electrochemistry and provides new perspectives for high-energy battery electrode designs.

NANO LETTERS (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Enhancing the Reversibility of Lithium Cobalt Oxide Phase Transition in Thick Electrode via Low Tortuosity Design

Renjie He et al.

Summary: The low tortuous LiCoO2 (LCO-LT) electrode, designed using the ice-templating method, shows improved cyclability and capacity retention for lithium-ion batteries.

NANO LETTERS (2022)

Add to Collection
Review Nanoscience & Nanotechnology

Bridging nano- and microscale X-ray tomography for battery research by leveraging artificial intelligence

Jonathan Scharf et al.

Summary: This review discusses the application of X-ray computed tomography (CT) and nanoscale CT systems in the battery field, as well as the incorporation of artificial intelligence and machine learning analysis. It highlights the potential for studying the composition and dynamics of microstructures in battery materials with nanoscale resolution.

NATURE NANOTECHNOLOGY (2022)

Add to Collection
Letter Materials Science, Multidisciplinary

Ultra-high-energy lithium-ion batteries enabled by aligned structured thick electrode design

Chao-Chao Zhou et al.

RARE METALS (2022)

Add to Collection
Article Engineering, Electrical & Electronic

Real-time mechanical and thermal monitoring of lithium batteries with PVDF-TrFE thin films integrated within the battery

Xiaoli Peng et al.

Summary: A micro thin-film sensor for monitoring the pressure/temperature of lithium-ion batteries has been developed using flexible printed circuit technology. This sensor can provide real-time monitoring of mechanical and thermal damage inside the battery, allowing for early detection of battery failure and significantly improving battery safety performance.

SENSORS AND ACTUATORS A-PHYSICAL (2022)

Add to Collection
Article Multidisciplinary Sciences

Optical sensors for operando stress monitoring in lithium-based batteries containing solid-state or liquid electrolytes

Laura Albero Blanquer et al.

Summary: This study presents a method for investigating chemo-mechanical stress in battery electrodes during operation. Optical fiber sensors embedded in the electrodes are used to monitor the stress, providing potential applications in battery diagnosis and design.

NATURE COMMUNICATIONS (2022)

Add to Collection
Article Multidisciplinary Sciences

Extremely fast-charging lithium ion battery enabled by dual-gradient structure design

Lei-Lei Lu et al.

Summary: The poor rate capability of graphite anodes hampers the charging speed of lithium-ion batteries. This study presents a previously unreported dual-gradient structure design in the graphite anode, which improves the charging capability and achieves extremely fast-charging.

SCIENCE ADVANCES (2022)

Add to Collection
Article Chemistry, Physical

Deconvoluting the benefits of porosity distribution in layered electrodes on the electrochemical performance of Li-ion batteries

Abbos Shodiev et al.

Summary: This study provides a systematic assessment of ionic resistance in heterogeneous porous electrodes, showing that progressively decreasing porosity leads to higher performance in thick electrodes.

ENERGY STORAGE MATERIALS (2022)

Add to Collection
Article Chemistry, Physical

Enhanced homogeneity of electrochemical reaction via low tortuosity enabling high-voltage nickel-rich layered oxide thick-electrode

Shuping Li et al.

Summary: In this study, a low-tortuosity thick electrode was constructed using the ice-templating strategy, and its effect on electrochemical performance was investigated. The results showed that the low-tortuosity electrode exhibited reduced concentration polarization and fast ion transport kinetics, resulting in superior rate capability. Additionally, the low-tortuosity electrode facilitated homogeneous electrochemical reactions and reduced intragranular stress, leading to improved structural integrity and cyclability.

ENERGY STORAGE MATERIALS (2022)

Add to Collection
Article Chemistry, Physical

Faster and better: A polymeric chaperone binder for microenvironment management in thick battery electrodes

Lei Jing et al.

Summary: This study reports a polymeric chaperone binder for regulating electrode microstructures. The binder enables the fabrication of high-quality thick electrodes with reduced energy consumption and demonstrates excellent performance. The microstructures and properties of the active material microenvironment are characterized, and thick electrodes with high areal capacity and superior performance are demonstrated.

ENERGY STORAGE MATERIALS (2022)

Add to Collection
Review Green & Sustainable Science & Technology

Sensing as the key to battery lifetime and sustainability

Jiaqiang Huang et al.

Summary: Today's energy systems heavily rely on rechargeable batteries, and the increasing demand raises environmental concerns. This review explores the role of optical sensors in improving the sustainability of batteries and highlights the potential benefits of integrating fiber optic techniques with new battery platforms.

NATURE SUSTAINABILITY (2022)

Add to Collection
Article Chemistry, Physical

Understanding slurry mixing effects on the fast charging capability of lithium-ion battery cells: Methodology and case study

Korbinian Huber et al.

Summary: The slurry preparation of graphite anodes has an important influence on their performance and fast charging capability. This study introduces a method that investigates the impact of slurry preparation on electrode properties and fast charging performance using an in-situ lithium plating detection technique. The results show that high intensity mixing leads to an increased electrode tortuosity, which in turn deteriorates the fast charging performance.

JOURNAL OF POWER SOURCES (2022)

Add to Collection
Article Chemistry, Physical

A novel organosilicon-type binder for LiCoO2 cathode in Li-ion batteries

Junho Ahn et al.

Summary: Researchers have developed a new organosilicon-type binder (S-binder) that improves the adhesion, elasticity, and flexibility of the electrode in lithium-ion batteries, resulting in significantly improved electrochemical performance.

ENERGY STORAGE MATERIALS (2022)

Add to Collection
Article Chemistry, Physical

Designing electrode architectures to facilitate electrolyte infiltration for lithium-ion batteries

Abbos Shodiev et al.

Summary: Electrolyte infiltration is a critical step in Lithium-ion battery manufacturing, and it can be influenced by adjusting the porous mesostructure and dimensions of the electrodes and separator. By optimizing the porosity, porosity distribution, and particle size distribution of the active material, the electrolyte infiltration process can be improved, reducing both time and energy consumption in the manufacturing process.

ENERGY STORAGE MATERIALS (2022)

Add to Collection
Article Chemistry, Applied

Revisiting the electrode manufacturing: A look into electrode rheology and active material microenvironment

Yan He et al.

Summary: The microstructures at the electrode level are crucial for battery performance. However, the lack of clear understanding of the electrode microstructures and their structuring process poses challenges in controlling and evaluating electrode quality during fabrication. This review introduces the concept of active material microenvironment (ME@AM) and highlights the scientific significance of electrode processing for quality control. The role of electrode rheology in electrode structuring and characterization during the manufacturing process is also discussed.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection
Article Chemistry, Physical

Systematic analysis of the impact of slurry coating on manufacture of Li-ion battery electrodes via explainable machine learning

Mona Faraji Niri et al.

Summary: The effect of slurry structure on the electrode properties and performance of lithium-ion batteries was studied in this paper, with a focus on the coating process. A machine learning methodology and statistical analysis method were used to comprehensively evaluate the impact of multiple control variables. The coating gap was identified as the most influential factor, while the importance of slurry viscosity and surface tension for electrode quality was also demonstrated.

ENERGY STORAGE MATERIALS (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Dynamic Investigation of Battery Materials via Advanced Visualization: From Particle, Electrode to Cell Level (Adv. Mater. 52/2022)

Cheng Zeng et al.

ADVANCED MATERIALS (2022)

Add to Collection
Article Chemistry, Physical

Gradient porosity electrodes for fast charging lithium-ion batteries

Jian Yang et al.

Summary: To address the issue of Li plating on the surface of thick graphite electrodes, an innovative gradient porosity architecture was proposed to facilitate mass transport and suppress Li plating. Experimental results showed that this structure significantly improved the performance and durability of the electrodes.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Thick Electrode Design for Facile Electron and Ion Transport: Architectures, Advanced Characterization, and Modeling

David J. Arnot et al.

Summary: This article discusses three critical aspects of thick high-loading electrode science and technology, including design and fabrication methods, advanced characterization methods, and the use of modeling. Through these methods, lithium-ion batteries with high energy density and power output can be achieved, advancing the development of next-generation batteries.

ACCOUNTS OF MATERIALS RESEARCH (2022)

Add to Collection
Article Chemistry, Multidisciplinary

The significance of detecting imperceptible physical/chemical changes/reactions in lithium-ion batteries: a perspective

Hong Zhao et al.

Summary: This paper emphasizes the significance of high-precision measurements in Li-ion batteries and proposes a combined approach using electrochemical and material measurements to gain insights into the battery's performance and lifespan.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Add to Collection
Article Chemistry, Physical

Applications of advanced metrology for understanding the effects of drying temperature in the lithium-ion battery electrode manufacturing process

Ye Shui Zhang et al.

Summary: The temperature has a significant effect on the behavior of both the cathode and anode during the drying process. In the cathode, increasing temperature leads to carbon aggregation on the surface of active particles, improving conductivity. On the other hand, temperature variation has little impact on the electrochemical performance of the anode, which may be attributed to the use of low adhesion water-based binders.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection
Review Materials Science, Multidisciplinary

Dry electrode technology, the rising star in solid-state battery industrialization

Yang Lu et al.

Summary: The industrialization of solid-state batteries is a growing focus, and dry battery electrode technology, as a new concept and technology, has the potential to simplify manufacturing processes and improve battery performance and production efficiency, thus promoting the industrialization of solid-state batteries.

MATTER (2022)

Add to Collection
Article Energy & Fuels

Recent progress and perspectives on designing high-performance thick electrodes for all-solid-state lithium batteries

Xiaofei Yang et al.

Summary: Thick electrodes are crucial for high-performance all-solid-state lithium batteries, especially by designing continuous Li+/e(-) transport pathways and low-tortuosity structures. Additionally, interfacial engineering can improve the SSE/electrode material interface, while factors such as particle size, binder, crystal structure, and solvent influence the construction of Li+/e(-) transport pathways.

ETRANSPORTATION (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Boosted Storage Kinetics in Thick Hierarchical Micro-Nano Carbon Architectures for High Areal Capacity Li-Ion Batteries

Yang Wu et al.

Summary: The study presents a unique hierarchical-networked all-carbon electrode to address the challenges in developing thick electrodes for high areal capacity lithium ion batteries. This electrode demonstrates excellent performance with high reversible capacity and rate capability, utilizing a combination of micrometer-sized carbon fibers, nano-sized carbon nanotubes, and pyrolytic carbon. Insights into the lithium ion storage mechanism and the construction of high mechanical stability thick electrodes are provided for future battery technologies.

ENERGY & ENVIRONMENTAL MATERIALS (2022)

Add to Collection
Article Chemistry, Physical

Aqueous Ni-rich-cathode dispersions processed with phosphoric acid for lithium-ion batteries with ultra-thick electrodes

Alexander Kukay et al.

Summary: The production of lithium-ion batteries (LIB) can benefit economically and environmentally from aqueous processing, although issues still exist with ultra-thick cathodes. An investigation into mitigating corrosion by adjusting the pH of the dispersion with phosphoric acid has been conducted, resulting in a technique for producing aqueous processed cathodes with improved surface cracking and high-rate discharge capacity.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection
Article Materials Science, Ceramics

Tape casting manufacturing of thick Li4Ti5O12 ceramic electrodes with high areal capacity for lithium-ion batteries

Carmen de la Torre-Gamarra et al.

Summary: This work demonstrates the preparation of additive-free ceramic Li4Ti5O12 (LTO) electrodes with high thickness by optimizing the sintering process and using a reducing atmosphere. The absence of binders in the final electrode leads to very high volumetric and areal capacities, paving the way for large-scale production of thick electrodes for applications in all-solid-state batteries, improving the safety of lithium-ion batteries.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Design of Scalable, Next-Generation Thick Electrodes: Opportunities and Challenges

Adam M. Boyce et al.

Summary: Current research is allowing for thicker lithium-ion battery electrodes, which can improve energy density and reduce costs, but challenges such as performance issues, manufacturing challenges, and scalability remain. Pore engineering may provide opportunities to design thicker and better electrodes while ensuring long-term performance and scalability.

ACS NANO (2021)

Add to Collection
Article Chemistry, Physical

An effective approach to improve electrochemical performance of thick electrodes

Kaifang Song et al.

Summary: Increasing areal active material loading by thick electrodes is an effective approach to improve the energy density of lithium-ion batteries, but may induce large polarization effects. This study demonstrates that dual-layered cathodes with CNTs and Super P can achieve high areal capacity and excellent capacity retention over cycles, providing a viable approach for improving the performance of thick electrodes.

IONICS (2021)

Add to Collection
Article Chemistry, Physical

Challenges, laser processing and electrochemical characteristics on application of ultra-thick electrode for high-energy lithium-ion battery

Junsu Park et al.

Summary: The study demonstrates that laser structuring of ultra-thick electrodes can improve the efficiency and performance of high-energy batteries by reducing internal resistances and enhancing diffusion characteristics, leading to increased capacity and cost savings.

JOURNAL OF POWER SOURCES (2021)

Add to Collection
Article Chemistry, Physical

Impact of secondary particle size and two-layer architectures on the high-rate performance of thick electrodes in lithium-ion battery pouch cells

Marissa Wood et al.

Summary: Adjusting electrode design and particle size can significantly improve the performance of thick electrodes in high energy density batteries.

JOURNAL OF POWER SOURCES (2021)

Add to Collection
Article Chemistry, Physical

Low tortuosity thick cathode design in high loading lithium sulfur batteries enabled by magnetic hollow carbon fibers

Jun Ma et al.

Summary: The sluggish kinetic in thick electrodes can be alleviated by implementing low tortuosity structure design, which allows for better mass transport kinetics and improved electrochemical performance.

APPLIED SURFACE SCIENCE (2021)

Add to Collection
Article Electrochemistry

High performance thick cathodes enabled by gradient porosity

Kaifang Song et al.

Summary: Optimizing electrode structure can effectively enhance the performance of thick electrodes, achieving better lithium ion battery properties through a reasonable porosity distribution.

ELECTROCHIMICA ACTA (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Building Efficient Ion Pathway in Highly Densified Thick Electrodes with High Gravimetric and Volumetric Energy Densities

Jingyi Wu et al.

Summary: The article introduces a novel design of thick electrodes, successfully achieving lower porosity and high gravimetric/volumetric energy densities through a structure connecting highly densified active material regions and continuous electrolyte-buffering voids.

NANO LETTERS (2021)

Add to Collection
Article Chemistry, Physical

Impact of electrode porosity architecture on electrochemical performances of 1 mm-thick LiFePO4 binder-free Li-ion electrodes fabricated by Spark Plasma Sintering

Rakesh Elango et al.

Summary: This research reports the fabrication of thick binder-free LiFePO4 electrodes with two different pore sizes and porosities using Spark Plasma Sintering (SPS) and templating approach. The study shows that the porosity architecture significantly affects the electrochemical performance, especially in samples with larger pores. The correlation between morphological properties and the rate capability performance is established, with capacity loss mainly attributed to Li-ion diffusion limitations.

JOURNAL OF POWER SOURCES (2021)

Add to Collection
Article Energy & Fuels

Electrode thickness design toward bulk energy storage devices with high areal/volumetric energy density

Feng Wang et al.

Summary: In this study, a wood-derived carbon thick electrode with a thickness of 1.532 mm demonstrated the best supercapacitance performance, with high active material loading, specific capacitance, and power densities. It also exhibited excellent cycling stability.

APPLIED ENERGY (2021)

Add to Collection
Article Chemistry, Physical

All-carbon-frameworks enabled thick electrode with exceptional high-areal-capacity for Li-Ion storage

Guo Li et al.

Summary: This study utilized the concept of thick electrode to design a high-capacity lithium-ion battery anode with a 3D all-carbon framework. By incorporating GNP, the electrode achieved easier Li-ion intercalation/deintercalation pathway, promoting pseudocapacitive and surface adsorption Li-ion storage.

CARBON (2021)

Add to Collection
Article Chemistry, Physical

Scalable Manufacture of High-Performance Battery Electrodes Enabled by a Template-Free Method

Ruoyu Xiong et al.

Summary: The article introduces a method to improve the rate performance of thick electrode design for lithium-ion batteries by introducing vertically oriented structure pores. A template-free strategy is developed to construct controllable oriented microchannels using vertically aggregated bubbles generated from thermal decomposition, successfully increasing the capacity and power density of the electrodes.

SMALL METHODS (2021)

Add to Collection
Article Nanoscience & Nanotechnology

Influence of Calendering on the Electrochemical Performance of LiNi0.9Mn0.05Al0.05O2 Cathodes in Lithium-Ion Cells

Richard Sim et al.

Summary: Electrode calendering improves the surface area and cycle life of the electrode, reducing capacity fade. Additionally, calendered cells exhibit improved pulse-power performance with a larger usable capacity range after long-term cycling.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection
Article Nanoscience & Nanotechnology

In Situ Ultrasound Acoustic Measurement of the Lithium-Ion Battery Electrode Drying Process

Ye Shui Zhang et al.

Summary: The electrode drying process is crucial for lithium-ion battery performance, with drying rates affecting binder distribution. Ultrasound acoustic-based techniques have been developed as an in situ tool to study the drying process, offering a new mode for investigating the dynamic process.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Ultrahigh-Capacity and Scalable Architected Battery Electrodes via Tortuosity Modulation

Jingyi Wu et al.

Summary: In this study, a low-tortuosity LiFePO4 (LFP) electrode with ultrahigh loadings of active materials and a highly efficient transport network was constructed using a facile and scalable templated phase inversion method. The ultrathick electrodes demonstrated marked improvements in rate performance and cycling stability under high areal loadings, benefiting from the structural advantages.

ACS NANO (2021)

Add to Collection
Article Chemistry, Multidisciplinary

From Fundamental Understanding to Engineering Design of High-Performance Thick Electrodes for Scalable Energy-Storage Systems

Jingyi Wu et al.

Summary: The pursuit of higher energy and power outputs in batteries has led researchers to focus on optimizing electrode thickness and other key design parameters to achieve higher cell-level energy and power densities. Strategies to simultaneously enhance energy and power output have been elaborated upon, while remaining challenges towards scalable high-energy/power energy-storage systems have been highlighted.

ADVANCED MATERIALS (2021)

Add to Collection
Article Chemistry, Inorganic & Nuclear

Engineering graphite microfiber-based thick electrodes as anode material for lithium ion batteries

Yang Wu et al.

Summary: This report introduces a thick electrode structure utilizing graphite fiber and pyrolytic carbon to design a three-dimensional graphite microfiber-based thick electrode with scalable manufacturing strategy and good mechanical stability. When used as anode material for lithium ion batteries, the GFT electrode demonstrates high areal capacity, good cyclic stability, and attractive rate performance.

INORGANIC CHEMISTRY COMMUNICATIONS (2021)

Add to Collection
Article Electrochemistry

Stress-Regulated Protocols for Fast Charging and Long Cycle Life in Lithium-Ion Batteries: Modeling and Experiments

Eryue Gao et al.

Summary: A stress-regulated fast charging protocol has been studied to accelerate charging without rapid degradation, which significantly shortens the charging process without sacrificing cycling stability and capacity utilization. The proposed protocol appears superior to other fast charging protocols in achieving a balance of charging speed and cycling performance.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection
Article Electrochemistry

Pore Microstructure Impacts on Lithium Ion Transport and Rate Capability of Thick Sintered Electrodes

Ziyang Nie et al.

Summary: Increasing electrode thickness is one route to improve the energy density of lithium-ion battery cells, but restricted Li+ transport in the electrolyte phase through the porous microstructure of thick electrodes limits high current densities and rates of charge/discharge. This study explores processing routes to mitigate transport restrictions and shows that templating the electrode microstructure can significantly improve electrochemical cell properties, especially in situations where ion transport limitations are the rate-limiting step.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Tunable Porous Electrode Architectures for Enhanced Li-Ion Storage Kinetics in Thick Electrodes

Xiao Zhang et al.

Summary: This study introduces a modified ice-templating method to fabricate low-tortuosity porous electrodes and systematically investigates the impact of structural parameters on thick electrode electrochemistry. It reveals that electrodes with thinner walls can maintain higher capacity under higher current densities.

NANO LETTERS (2021)

Add to Collection
Review Chemistry, Physical

Vertically aligned two-dimensional materials-based thick electrodes for scalable energy storage systems

Zhengyu Ju et al.

Summary: This review summarizes important strategies for fabricating vertically aligned 2D materials-based electrodes to fully exploit their advantages in high-energy storage. The advantages and challenges of these methods in terms of key features of thick electrodes are discussed, and design principles for high-energy/power devices are illustrated.

NANO RESEARCH (2021)

Add to Collection
Editorial Material Chemistry, Physical

Engineering current collectors for batteries with high specific energy

Rishav Choudhury et al.

JOULE (2021)

Add to Collection
Article Chemistry, Physical

High-areal-capacity thick cathode with vertically-aligned micro-channels for advanced lithium ion batteries

Junru Wang et al.

Summary: The study presents a novel strategy for constructing thick electrodes towards high energy density LIBs, by preparing ultrahigh-capacity thick LiFePO4 (UCT-LFP)-based freestanding electrodes with vertically-aligned channels. The electrodes show superior rate capability and cycling performance.

ENERGY STORAGE MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Optimal electrode-scale design of Li-ion electrodes: A general correlation

Zeyu Hui et al.

Summary: Multi-scale physics-based models are optimized for maximum energy density by adjusting porosity and mass loading. Electrode-scale properties impact optimal design, but can be generalized into convenient correlations that provide guidelines for optimization of electrode architectures. These correlations are consistent with prior optimization results in the literature.

ENERGY STORAGE MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Multi-layered composite electrodes of high power Li4Ti5O12 and high capacity SnO2 for smart lithium ion storage

Sang Ho Lee et al.

Summary: Through discrete layering and optimized electrochemical behavior, a multi-layered composite electrode was utilized to explore new capacity-power combinations, showing remarkable rate capability and energy density in both lithium ion batteries and capacitors.

ENERGY STORAGE MATERIALS (2021)

Add to Collection
Review Chemistry, Physical

3D printing of advanced lithium batteries: a designing strategy of electrode/electrolyte architectures

Mengfan Pei et al.

Summary: 3D printing technology is gradually being applied in lithium batteries to improve the utilization rate of electrode and electrolyte materials, enhance energy and power densities, and show development trends, but still face challenges.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Multi-length scale microstructural design of lithium-ion battery electrodes for improved discharge rate performance

Xuekun Lu et al.

Summary: The study shows that randomly oriented primary particles lead to a 2.35 times increase in SST resistance and induce uneven intra-particle lithiation. Internal cracks significantly restrict accessibility to the active material. Double-layered particles are proven to be more promising than single-crystal particles.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection
Review Chemistry, Physical

3D printing-enabled advanced electrode architecture design

Tiankuo Chu et al.

Summary: This paper reviews recent studies on advanced electrode architecture design and manufacturing enabled by emerging additive manufacturing techniques for future high-performance energy storage devices. It highlights the importance of advanced electrode structure in promoting the performance of energy storage devices and summarizes the latest research on 3D printed electrodes.

CARBON ENERGY (2021)

Add to Collection
Review Electrochemistry

High-Mass-Loading Electrodes for Advanced Secondary Batteries and Supercapacitors

Feng Wu et al.

Summary: The increasing demand for high energy density advanced electrochemical energy storage systems (EESSs) for electric vehicles and portable electronics is driving the electrode revolution, with the development of high-mass-loading electrodes (HMLEs) as a promising approach. However, HMLEs face challenges such as poor charge kinetics, electrode structural stability, and complex production processes. This review provides a comprehensive summary of HMLEs, discussing strategies to improve their electrochemical performance and their applications in various EESSs.

ELECTROCHEMICAL ENERGY REVIEWS (2021)

Add to Collection
Article Electrochemistry

Laser Patterning of High-Mass-Loading Graphite Anodes for High-Performance Li-Ion Batteries

Romain Dubey et al.

Summary: The rate capability and volumetric capacity of graphite electrodes can be significantly improved by laser patterning to create vertically aligned channels for rapid Li-ion transport. Laser patterned graphite electrodes exhibited enhanced performance compared to non-patterned electrodes, showing an increase in volumetric capacity.

BATTERIES & SUPERCAPS (2021)

Add to Collection
Article Energy & Fuels

Manufacturing Process for Improved Ultra-Thick Cathodes in High-Energy Lithium-Ion Batteries

Lea Sophie Kremer et al.

ENERGY TECHNOLOGY (2020)

Add to Collection
Article Energy & Fuels

Solvent-Free Manufacturing of Electrodes for Lithium-Ion Batteries via Electrostatic Coating

Gerrit Schaelicke et al.

ENERGY TECHNOLOGY (2020)

Add to Collection
Article Chemistry, Physical

Combining composition graded positive and negative electrodes for higher performance Li-ion batteries

Chuan Cheng et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection
Article Engineering, Environmental

3D printing nanocomposite gel-based thick electrode enabling both high areal capacity and rate performance for lithium-ion battery

Chuang Sun et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection
Review Physics, Multidisciplinary

Review on electrode-level fracture in lithium-ion batteries

Bo Lu et al.

CHINESE PHYSICS B (2020)

Add to Collection
Article Chemistry, Physical

Impact of the cycling temperature on electrode/electrolyte interfaces within Li4Ti5O12 vs LiMn2O4 cells

Nicolas Gauthier et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection
Review Multidisciplinary Sciences

A reflection on lithium-ion battery cathode chemistry

Arumugam Manthiram

NATURE COMMUNICATIONS (2020)

Add to Collection
Article Chemistry, Physical

High mass loading additive-free LiFePO4 cathodes with 500 μm thickness for high areal capacity Li-ion batteries

Carmen de la Torre-Gamarra et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Measurements of fracture properties of MWCNTs modified LiNi0.5Mn0.3Co0.2O2 electrodes by a modified shear lag model

Weiguo Mao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection
Article Chemistry, Physical

Perspectives on the relationship between materials chemistry and roll-to-roll electrode manufacturing for high-energy lithium-ion batteries

David L. Wood et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Simple Approach: Heat Treatment to Improve the Electrochemical Performance of Commonly Used Anode Electrodes for Lithium-Ion Batteries

Ye Jin et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Chemistry, Physical

Understanding capacity fading mechanism of thick electrodes for lithium-ion rechargeable batteries

Kyu-Young Park et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection
Article Energy & Fuels

Ultralight and fire-extinguishing current collectors for high-energy and high-safety lithium-ion batteries

Yusheng Ye et al.

NATURE ENERGY (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Constructing Gradient Porous Structure in Thick Li4Ti5O12 Electrode for High-Energy and Stable Lithium-Ion Batteries

Wenwen Deng et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection
Article Electrochemistry

Additive Manufacturing of Aqueous-Processed LiMn2O4 Thick Electrodes for High-Energy-Density Lithium-Ion Batteries

Lorenzo Airoldi et al.

BATTERIES & SUPERCAPS (2020)

Add to Collection
Article Chemistry, Physical

Converting a thick electrode into vertically aligned Thin electrodes by 3D-Printing for designing thickness independent Li-S cathode

Xuejie Gao et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection
Article Chemistry, Applied

Choice for graphene as conductive additive for cathode of lithium-ion batteries

Ying Shi et al.

JOURNAL OF ENERGY CHEMISTRY (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Performance enhancement of Li-ion battery by laser structuring of thick electrode with low porosity

Junsu Park et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2019)

Add to Collection
Article Electrochemistry

In-operando deformation studies on the mechano-electrochemical mechanism in free-standing MWCNTs/V2O5 lithium ion battery electrode

Zhuo Wang et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection
Article Chemistry, Physical

Towards water based ultra-thick Li ion battery electrodes - A binder approach

Lukas Ibing et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection
Article Chemistry, Multidisciplinary

High-Performance, Low-Cost, and Dense-Structure Electrodes with High Mass Loading for Lithium-Ion Batteries

Xinsheng Wu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection
Article Engineering, Mechanical

Effects of cycle times and C-rate on mechanical properties of copper foil and adhesive strength of electrodes in commercial LiCoO2 LIBs

Cuiying Dai et al.

ENGINEERING FAILURE ANALYSIS (2019)

Add to Collection
Article Chemistry, Physical

Thick Electrode Batteries: Principles, Opportunities, and Challenges

Yudi Kuang et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection
Article Chemistry, Physical

Layer-by-layer printing of multi-layered heterostructures using Li4Ti5O12 and Si for high power Li-ion storage

Sang Ho Lee et al.

NANO ENERGY (2019)

Add to Collection
Article Chemistry, Physical

Rechargeable solid-state lithium metal batteries with vertically aligned ceramic nanoparticle/polymer composite electrolyte

Xue Wang et al.

NANO ENERGY (2019)

Add to Collection
Article Energy & Fuels

Drying of Lithium-Ion Battery Anodes for Use in High-Energy Cells: Influence of Electrode Thickness on Drying Time, Adhesion, and Crack Formation

Jana Kumberg et al.

ENERGY TECHNOLOGY (2019)

Add to Collection
Article Chemistry, Physical

Ultra-thick battery electrodes for high gravimetric and volumetric energy density Li-ion batteries

Maria Eugenia Sotomayor et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection
Article Chemistry, Physical

Effects of polymeric binders on. the cracking behavior of silicon composite electrodes during electrochemical cycling

Yikai Wang et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection
Article Nanoscience & Nanotechnology

In Situ Focused Ion Beam Scanning Electron Microscope Study of Microstructural Evolution of Single Tin Particle Anode for Li-Ion Batteries

Xinwei Zhou et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Improved swelling behavior of Li ion batteries by microstructural engineering of anode

Keemin Park et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2019)

Add to Collection
Article Chemistry, Physical

High-Speed electron beam curing of thick electrode for high energy density Li-ion batteries

Zhijia Du et al.

GREEN ENERGY & ENVIRONMENT (2019)

Add to Collection
Article Electrochemistry

Ultra-Thin Coating and Three-Dimensional Electrode Structures to Boosted Thick Electrode Lithium-Ion Battery Performance

Jie Li et al.

BATTERIES & SUPERCAPS (2019)

Add to Collection
Article Chemistry, Physical

A Facile and Very Effective Method to Enhance the Mechanical Strength and the Cyclability of Si-Based Electrodes for Li-Ion Batteries

Cuauhtemoc Reale Hernandez et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Wood-Inspired High-Performance Ultrathick Bulk Battery Electrodes

Lei-Lei Lu et al.

ADVANCED MATERIALS (2018)

Add to Collection
Article Electrochemistry

Analysis of the relationship between vertical imparity distribution of conductive additive and electrochemical behaviors in lithium ion batteries

Tao Liu et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection
Article Chemistry, Physical

All-Solid-State Batteries with Thick Electrode Configurations

Yuki Kato et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

Add to Collection
Article Electrochemistry

Analysis of Rate-Limiting Factors in Thick Electrodes for Electric Vehicle Applications

Byoung-Sun Lee et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection
Article Electrochemistry

Tortuosity of Battery Electrodes: Validation of Impedance-Derived Values and Critical Comparison with 3D Tomography

Johannes Landesfeind et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection
Article Electrochemistry

Impact of Pore Tortuosity on Electrode Kinetics in Lithium Battery Electrodes: Study in Directionally Freeze-Cast LiNi0.8Co0.15Al0.05O2 (NCA)

Benjamin Delattre et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection
Article Chemistry, Physical

Additive-free Li4Ti5O12 thick electrodes for Li-ion batteries with high electrochemical performance

M. E. Sotomayor et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection
Review Energy & Fuels

Current status and challenges for automotive battery production technologies

Arno Kwade et al.

NATURE ENERGY (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Advanced 3D Current Collectors for Lithium-Based Batteries

Song Jin et al.

ADVANCED MATERIALS (2018)

Add to Collection
Article Chemistry, Physical

Improved safety and mechanical characterizations of thick lithium-ion battery electrodes structured with porous metal current collectors

Daniel J. Noelle et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection
Article Chemistry, Physical

In-situ characterizations of chemo-mechanical behavior of free-standing vanadium pentoxide cathode for lithium-ion batteries during discharge charge cycling using digital image correlation

Weiguo Mao et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection
Article Chemistry, Physical

Conductive Cellulose Nanofiber Enabled Thick Electrode for Compact and Flexible Energy Storage Devices

Yudi Kuang et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection
Article Electrochemistry

Understanding limiting factors in thick electrode performance as applied to high energy density Li-ion batteries

Zhijia Du et al.

JOURNAL OF APPLIED ELECTROCHEMISTRY (2017)

Add to Collection
Article Chemistry, Applied

Investigation of interfacial instabilities with a two-layer slide coating process

Cornelia K. Buerkin et al.

JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2017)

Add to Collection
Article Chemistry, Physical

Numerical and experimental evaluation of the relationship between porous electrode structure and effective conductivity of ions and electrons in lithium-ion batteries

Gen Inoue et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection
Article Chemistry, Physical

High-performance lithium-ion batteries with 1.5 μm thin copper nanowire foil as a current collector

Hsun-Chen Chu et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection
Article Chemistry, Physical

Investigation of binder distribution in graphite anodes for lithium-ion batteries

Marcus Mueller et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection
Article Chemistry, Physical

Solvent-free dry powder coating process for low-cost manufacturing of LiNi1/3Mn1/3Co1/3O2 cathodes in lithium-ion batteries

Mohanad Al-Shroofy et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection
Article Chemistry, Physical

Enabling aqueous processing for crack-free thick electrodes

Zhijia Du et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection
Article Electrochemistry

Is There a Benefit in Employing Graded Electrodes for Lithium-Ion Batteries?

Yanbo Qi et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection
Article Electrochemistry

Mechanistic Understanding of the Role of Evaporation in Electrode Processing

Malcolm Stein et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection
Article Chemistry, Multidisciplinary

Porous Al Current Collector for Dendrite-Free Na Metal Anodes

Shan Liu et al.

NANO LETTERS (2017)

Add to Collection
Review Materials Science, Multidisciplinary

Electrochemomechanical degradation of high-capacity battery electrode materials

Sulin Zhang et al.

PROGRESS IN MATERIALS SCIENCE (2017)

Add to Collection
Article Chemistry, Physical

A two layer electrode structure for improved Li Ion diffusion and volumetric capacity in Li Ion batteries

Chun Huang et al.

NANO ENERGY (2017)

Add to Collection
Article Energy & Fuels

Improvement of Lithium-Ion Battery Performance by Two-Layered Slot-Die Coating Operation

Darjen Liu et al.

ENERGY TECHNOLOGY (2017)

Add to Collection
Article Materials Science, Multidisciplinary

A hybrid three-dimensionally structured electrode for lithium-ion batteries via 3D printing

Jie Li et al.

MATERIALS & DESIGN (2017)

Add to Collection
Article Chemistry, Physical

Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes

Amir Azhari et al.

CARBON (2017)

Add to Collection
Article Electrochemistry

Relationship between Pore Design on Current Collectors, the Reaction Temperature and the Rate of Li+ Ion Pre-doping Reaction to Laminated Graphite/Porous Current Collector Anodes

Takashi Tsuda et al.

ELECTROCHEMISTRY (2017)

Add to Collection
Article Electrochemistry

Geometric and Electrochemical Characteristics of LiNi1/3Mn1/3Co1/3O2 Electrode with Different Calendering Conditions

Huixiao Kang et al.

ELECTROCHIMICA ACTA (2017)

Add to Collection
Article Mechanics

Diffusion-induced stresses in graphene-based composite bilayer electrode of lithium-ion battery

Dongying Liu et al.

COMPOSITE STRUCTURES (2017)

Add to Collection
Article Engineering, Chemical

Delamination behavior of lithium-ion battery anodes: Influence of drying temperature during electrode processing

M. Baunach et al.

DRYING TECHNOLOGY (2016)

Add to Collection
Article Electrochemistry

On Graded Electrode Porosity as a Design Tool for Improving the Energy Density of Batteries

Yiling Dai et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Add to Collection
Article Engineering, Chemical

Operability coating window of dual-layer slot coating processusing viscocapillary model

Ho Suk Ji et al.

CHEMICAL ENGINEERING SCIENCE (2016)

Add to Collection
Review Chemistry, Multidisciplinary

3D-printing technologies for electrochemical applications

Adriano Ambrosi et al.

CHEMICAL SOCIETY REVIEWS (2016)

Add to Collection
Article Chemistry, Physical

High-capacity thick cathode with a porous aluminum current collector for lithium secondary batteries

Hidetoshi Abe et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection
Article Chemistry, Physical

Novel solvent-free direct coating process for battery electrodes and their electrochemical performance

Dong-Won Park et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection
Article Chemistry, Physical

The interaction of consecutive process steps in the manufacturing of lithium-ion battery electrodes with regard to structural and electrochemical properties

Henrike Bockholt et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection
Article Chemistry, Physical

Thick electrodes for Li-ion batteries: A model based analysis

Timo Danner et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection
Review Chemistry, Physical

Conveying Advanced Li-ion Battery Materials into Practice The Impact of Electrode Slurry Preparation Skills

Alexander Kraytsberg et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection
Article Chemistry, Multidisciplinary

Superior cycling performance of a sandwich structure Si/C anode for lithium ion batteries

Zhengdong Yang et al.

RSC ADVANCES (2016)

Add to Collection
Article Multidisciplinary Sciences

Solvent-Free Manufacturing of Electrodes for Lithium-ion Batteries

Brandon Ludwig et al.

SCIENTIFIC REPORTS (2016)

Add to Collection
Article Energy & Fuels

Magnetically aligned graphite electrodes for high-rate performance Li-ion batteries

Juliette Billaud et al.

NATURE ENERGY (2016)

Add to Collection
Article Energy & Fuels

High-performance battery electrodes via magnetic templating

J. S. Sander et al.

NATURE ENERGY (2016)

Add to Collection
Article Electrochemistry

Effect of Porosity, Thickness and Tortuosity on Capacity Fade of Anode

Bharatkumar Suthar et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection
Article Electrochemistry

Thick Electrodes for High Energy Lithium Ion Batteries

Madhav Singh et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection
Article Polymer Science

Lithium salt of carboxymethyl cellulose as an aqueous binder for thick graphite electrode in lithium ion batteries

Ki Chun Kil et al.

MACROMOLECULAR RESEARCH (2015)

Add to Collection
Article Chemistry, Multidisciplinary

Graphene as an Interfacial Layer for Improving Cycling Performance of Si Nanowires in Lithium-Ion Batteries

Fan Xia et al.

NANO LETTERS (2015)

Add to Collection
Article Energy & Fuels

High-Speed Fabrication of Lithium-Ion Battery Electrodes by UV-Curing

Zheng Xue et al.

ENERGY TECHNOLOGY (2015)

Add to Collection
Article Electrochemistry

Tool for Tortuosity Estimation in Lithium Ion Battery Porous Electrodes

Martin Ebner et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection
Article Chemistry, Physical

Tortuosity characterization of 3D microstructure at nano-scale for energy storage and conversion materials

Yu-chen Karen Chen-Wiegart et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection
Article Energy & Fuels

Effect of calendering on electrode wettability in lithium-ion batteries

Yangping Sheng et al.

FRONTIERS IN ENERGY RESEARCH (2014)

Add to Collection
Article Chemistry, Multidisciplinary

Design of Battery Electrodes with Dual-Scale Porosity to Minimize Tortuosity and Maximize Performance

Chang-Jun Bae et al.

ADVANCED MATERIALS (2013)

Add to Collection
Article Chemistry, Physical

Performance enhancement of a lithium ion battery by incorporation of a graphene/polyvinylidene fluoride conductive adhesive layer between the current collector and the active material layer

Sangmin Lee et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection
Article Chemistry, Physical

Nanosilicon-Based Thick Negative Composite Electrodes for Lithium Batteries with Graphene as Conductive Additive

Binh Phuong Nhan Nguyen et al.

ADVANCED ENERGY MATERIALS (2013)

Add to Collection
Article Electrochemistry

A comprehensive understanding of electrode thickness effects on the electrochemical performances of Li-ion battery cathodes

Honghe Zheng et al.

ELECTROCHIMICA ACTA (2012)

Add to Collection
Article Electrochemistry

Theoretical and Experimental Analysis of Porous Electrodes for Lithium-Ion Batteries by Electrochemical Impedance Spectroscopy Using a Symmetric Cell

Nobuhiro Ogihara et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)

Add to Collection
Article Electrochemistry

Enhanced lithium storage performance of silicon anode via fabricating into sandwich electrode

YuHong Xu et al.

ELECTROCHIMICA ACTA (2011)

Add to Collection
Review Chemistry, Physical

A review of conduction phenomena in Li-ion batteries

Myounggu Park et al.

JOURNAL OF POWER SOURCES (2010)

Add to Collection
Article Electrochemistry

Optimal Porosity Distribution for Minimized Ohmic Drop across a Porous Electrode

Venkatasailanathan Ramadesigan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)

Add to Collection
Article Electrochemistry

Effect of LiCoO2 Cathode Nanoparticle Size on High Rate Performance for Li-Ion Batteries

Minki Jo et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)

Add to Collection
Article Multidisciplinary Sciences

Battery materials for ultrafast charging and discharging

Byoungwoo Kang et al.

NATURE (2009)

Add to Collection
Article Chemistry, Physical

Dual active material composite cathode structures for Li-ion batteries

J. F. Whitacre et al.

JOURNAL OF POWER SOURCES (2008)

Add to Collection
Article Physics, Multidisciplinary

Cracking in drying colloidal films

Karnail B. Singh et al.

PHYSICAL REVIEW LETTERS (2007)

Add to Collection
Article Chemistry, Physical

The role of carbon black distribution in cathodes for Li ion batteries

R Dominko et al.

JOURNAL OF POWER SOURCES (2003)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.