4.8 Article

Unraveling the Defect-Dominated Broadband Emission Mechanisms in (001)-Preferred Two-Dimensional Layered Antimony-Halide Perovskite Film

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Resonance-Mediated Dynamic Modulation of Perovskite Crystallization for Efficient and Stable Solar Cells

Ligang Xu et al.

Summary: Manipulating perovskite crystallization to prepare high-quality perovskite films is essential for achieving efficient and stable perovskite solar cells. By using a resonance hole-transporting material to modulate perovskite crystallization, high-performance inverted PSCs with power conversion efficiencies approaching 22% for small-area devices and up to 19.5% for large-area devices were produced, showing remarkably high stability without encapsulation.

ADVANCED MATERIALS (2022)

Article Chemistry, Physical

Exciton Self-Trapping for White Emission in 100-Oriented Two-Dimensional Perovskites via Halogen Substitution

Ying Han et al.

Summary: Research has shown that two-dimensional perovskites with similar crystal structures exhibit distinct emission mechanisms due to the enhanced electron-phonon coupling resulting from halogen substitution.

ACS ENERGY LETTERS (2022)

Article Optics

Highly Efficient and Ultra-Broadband Yellow Emission of Lead-Free Antimony Halide toward White Light-Emitting Diodes and Visible Light Communication

Qionghua Mo et al.

Summary: A new air-stable hybrid lead-free metal halide with a 0D structure was synthesized, showing high photoluminescence quantum yield and ultra-broadband yellow emission. Warm white light-emitting diodes were proposed by combining with blue LED chips, and were used for visible light communication with high data transmission rate.

LASER & PHOTONICS REVIEWS (2022)

Article Materials Science, Multidisciplinary

Fine-Tuning Single-Source White-Light Emission from All-Inorganic Corrugated 2D Antimony-Halide Perovskite

Fei Xu et al.

Summary: By homovalent substitution, the photoluminescence intensity and quantum yield of corrugated 2D antimony-halide perovskites have been significantly improved, making them potential candidates for single-source white-light emission.

ADVANCED OPTICAL MATERIALS (2022)

Article Materials Science, Multidisciplinary

High Quantum Efficiency of Stable Sb-Based Perovskite-Like Halides toward White Light Emission and Flexible X-Ray Imaging

Qionghua Mo et al.

Summary: This study synthesized a series of luminescent single crystals of antimony-based metal halides with high photoluminescence quantum yield and optimized the ratio of halogens to achieve ultra-broadband yellow light emission. Furthermore, the materials were used to fabricate LED light sources and X-ray scintillators, demonstrating excellent luminescence and imaging performance.

ADVANCED OPTICAL MATERIALS (2022)

Article Chemistry, Physical

Toward Eco-Friendly Lead-Free Low-Dimensional Perovskites

Xinying Gao et al.

Summary: Lead-free low-dimensional perovskites (LFLDPs) have emerged as promising alternatives to traditional perovskites due to their structural tunability, environmental friendliness, and stability. This article provides a brief description of recent progress on different types of LFLDPs, focusing on the structure-property relationship and luminescence mechanism. The key frontiers and challenges for further developing LFLDP materials are also discussed.

SMALL STRUCTURES (2022)

Article Chemistry, Physical

Kinetic Molecular Cationic Control of Defect-Induced Broadband Light Emission in 2D Hybrid Lead Iodide Perovskites

Adedayo M. Sanni et al.

Summary: This study examines how changing organic cation concentrations affects the light emission properties of two-dimensional hybrid lead iodide self-assembled quantum wells. Increasing cation concentrations leads to intense light emission, with broadband subgap photoluminescence observed. The results suggest that changes to the availability of molecular cations can control the light emission properties by promoting exciton self-trapping at defect sites.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Article Chemistry, Multidisciplinary

Lead-Free Organic-Perovskite Hybrid Quantum Wells for Highly Stable Light-Emitting Diodes

Kang Wang et al.

Summary: Researchers have developed an efficient and stable LED device using organic semiconductor barrier layers, which enable the conversion of emission energy from the organic layer into higher energy emission from the perovskite layer, leading to improved device performance and stability.

ACS NANO (2021)

Article Chemistry, Physical

Crystalline all-inorganic lead-free Cs3Sb2I9 perovskite microplates with ultra-fast photoconductive response and robust thermal stability

Sujit Kumer Shil et al.

Summary: In this study, crystalline, all-inorganic and lead-free Cs3Sb2I9 perovskite microplates were successfully synthesized, demonstrating excellent optoelectronic properties and setting a record for photoconductor performance among all lead-free perovskite materials. Additionally, these photodetectors showed superior thermal stability in a wide temperature range, indicating their potential for next-generation high-performance optoelectronic devices.

NANO RESEARCH (2021)

Article Physics, Multidisciplinary

Self-Consistent Potential Correction for Charged Periodic Systems

Mauricio Chagas da Silva et al.

Summary: Super cell models are commonly employed to calculate the electronic structure of local deviations from ideal periodicity. A correction scheme for artificially repeated charges is proposed and successfully tested for bulk and slab calculations, especially important in preventing spurious states in the vacuum.

PHYSICAL REVIEW LETTERS (2021)

Review Materials Science, Multidisciplinary

Photoluminescence of Singlet/Triplet Self-Trapped Excitons in Sb3+-Based Metal Halides

Yuyu Jing et al.

Summary: This passage discusses the relationship between the crystal structure and luminescent properties of Sb3+-based luminescent metal halides, highlighting that Sb3+ emission varies in different crystallographic environments, allowing for tunable luminescent performance.

ADVANCED OPTICAL MATERIALS (2021)

Review Chemistry, Physical

All-Inorganic Lead-Free Perovskite(-Like) Single Crystals: Synthesis, Properties, and Applications

Shuangyi Zhao et al.

Summary: Due to their nontoxicity, stability, and unique optoelectronic properties, all-inorganic lead-free halide semiconductors with perovskite and perovskite-like structures have emerged as promising optoelectronic materials for various applications, with a focus on the enhanced performances of ILFP single crystals compared to low dimensional and polycrystalline ILFP materials.

SMALL METHODS (2021)

Article Materials Science, Multidisciplinary

Efficiently Luminescent and Stable Lead-free Cs3Cu2Cl5@ Silica Nanocrystals for White Light-Emitting Diodes and Communication

Shuangyi Zhao et al.

Summary: The sol-gel reaction using tetraethoxysilane (TEOS) as a coating precursor for Cs3Cu2Cl5@SiOx NCs enhances their stability and photoluminescence quantum yield, leading to the fabrication of high-quality warm white light-emitting diodes. Additionally, the good white light emission enables potential applications in visible light communication.

ADVANCED OPTICAL MATERIALS (2021)

Article Nanoscience & Nanotechnology

Two-Step Chemical Vapor Deposition-Synthesized Lead-Free All-Inorganic Cs3Sb2Br9 Perovskite Microplates for Optoelectronic Applications

Sujit Kumer Shil et al.

Summary: Lead-based halide perovskites have attractive properties for optoelectronic devices, but lead toxicity and poor stability limit their practical use. Recently, there has been great interest in lead-free, environmentally-friendly inorganic halide perovskites. This study successfully synthesized lead-free Cs3Sb2Br9 perovskite microplates using a two-step CVD method, showing potential for high-performance optoelectronic device applications.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

One-Dimensional Molecular Metal Halide Materials: Structures, Properties, and Applications

Md. Zahidur Rahaman et al.

Summary: Metal halide hybrids with low-dimensional molecular structures have unusual photophysical properties due to strong quantum confinement, making them promising for optoelectronic applications. All-inorganic 1D metal halides, with near-unity photoluminescence quantum yield and excellent structural stability, are suitable for environmentally friendly optoelectronic devices.

SMALL STRUCTURES (2021)

Article Materials Science, Multidisciplinary

Rb2CuX3 (X = Cl, Br): 1D All-Inorganic Copper Halides with Ultrabright Blue Emission and Up-Conversion Photoluminescence

Tielyr D. Creason et al.

ADVANCED OPTICAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Effect of Bi Substitution on Cs3Sb2Cl9: Structural Phase Transition and Band Gap Engineering

Abinash Pradhan et al.

CRYSTAL GROWTH & DESIGN (2020)

Article Chemistry, Inorganic & Nuclear

Lead-Free Antimony Halide Perovskite with Heterovalent Mn2+ Doping

Xiaoyu Wang et al.

INORGANIC CHEMISTRY (2020)

Article Chemistry, Physical

Defect-Related Broadband Emission in Two-Dimensional Lead Bromide Perovskite Microsheets

Xianli Li et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

Review Physics, Condensed Matter

A brief review of formation energies calculation of surfaces and edges in semiconductors

Chuen-Keung Sin et al.

JOURNAL OF SEMICONDUCTORS (2020)

Article Nanoscience & Nanotechnology

Lead-Free Antimony-Based Light-Emitting Diodes through the Vapor-Anion-Exchange Method

Anupriya Singh et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Inorganic & Nuclear

General Synthesis of Lead-Free Metal Halide Perovskite Colloidal Nanocrystals in 1-Dodecanol

Ming-Ming Yao et al.

INORGANIC CHEMISTRY (2019)

Article Chemistry, Physical

Green Emission Induced by Intrinsic Defects in All-Inorganic Perovskite CsPb2Br5

Yu-Qian Zhou et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Review Chemistry, Multidisciplinary

From Lead Halide Perovskites to Lead-Free Metal Halide Perovskites and Perovskite Derivatives

Zewen Xiao et al.

ADVANCED MATERIALS (2019)

Article Materials Science, Multidisciplinary

Low- dimensional non- toxic A3Bi2X9 compounds synthesized by a dry mechanochemical route with tunable visible photoluminescence at room temperature

Yousra El Ajjouri et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Article Nanoscience & Nanotechnology

Photovoltaic Performance of Vapor-Assisted Solution-Processed Layer Polymorph of Cs3Sb2I9

Anupriya Singh et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Multidisciplinary

Formation of highly luminescent cesium bismuth halide perovskite quantum dots tuned by anion exchange

Yongbing Lou et al.

CHEMICAL COMMUNICATIONS (2018)

Article Chemistry, Physical

Size Tunable Cesium Antimony Chloride Perovskite Nanowires and Nanorods

Bapi Pradhan et al.

CHEMISTRY OF MATERIALS (2018)

Article Energy & Fuels

Lead-free, air-stable ultrathin Cs3Bi2I9 perovskite nanosheets for solar cells

Fan Bai et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

Review Multidisciplinary Sciences

Challenges for commercializing perovskite solar cells

Yaoguang Rong et al.

SCIENCE (2018)

Article Multidisciplinary Sciences

2D perovskite stabilized phase-pure formamidinium perovskite solar cells

Jin-Wook Lee et al.

NATURE COMMUNICATIONS (2018)

Article Chemistry, Multidisciplinary

Oriented Quasi-2D Perovskites for High Performance Optoelectronic Devices

Rong Yang et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

Phase Pure 2D Perovskite for High-Performance 2D-3D Heterostructured Perovskite Solar Cells

Pengwei Li et al.

ADVANCED MATERIALS (2018)

Review Chemistry, Multidisciplinary

2D Ruddlesden-Popper Perovskites for Optoelectronics

Yani Chen et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

All-Inorganic Bismuth-Based Perovskite Quantum Dots with Bright Blue Photoluminescence and Excellent Stability

Meiying Leng et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Chemistry, Physical

Solution-processable antimony-based light-absorbing materials beyond lead halide perovskites

Karunakara Moorthy Boopathi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Chemistry, Multidisciplinary

Efficient Visible Quasi-2D Perovskite Light-Emitting Diodes

Jinwoo Byun et al.

ADVANCED MATERIALS (2016)

Article Chemistry, Multidisciplinary

Lead-Free, Blue Emitting Bismuth Halide Perovskite Quantum Dots

Meiying Leng et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Article Chemistry, Physical

Optoelectronic Properties of (CH3NH3)3Sb2I9 Thin Films for Photovoltaic Applications

Jan-Christoph Hebig et al.

ACS ENERGY LETTERS (2016)

Article Chemistry, Physical

Thin-Film Preparation and Characterization of Cs3Sb2I9: A Lead-Free Layered Perovskite Semiconductor

Bayrammurad Saparov et al.

CHEMISTRY OF MATERIALS (2015)

Article Chemistry, Multidisciplinary

Self-Assembly of Broadband White-Light Emitters

Emma R. Dohner et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Article Materials Science, Multidisciplinary

Stability and electronic structure of Cu2ZnSnS4 surfaces: First-principles study

Peng Xu et al.

PHYSICAL REVIEW B (2013)

Article Materials Science, Multidisciplinary

Accurate prediction of defect properties in density functional supercell calculations

Stephan Lany et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2009)

Article Physics, Condensed Matter

Doping asymmetry in wide-bandgap semiconductors: Origins and solutions

Yanfa Yan et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2008)

Article Chemistry, Physical

Influence of the exchange screening parameter on the performance of screened hybrid functionals

Aliaksandr V. Krukau et al.

JOURNAL OF CHEMICAL PHYSICS (2006)

Article Physics, Multidisciplinary

Surface energy and the common dangling bond rule for semiconductors

SB Zhang et al.

PHYSICAL REVIEW LETTERS (2004)

Article Materials Science, Multidisciplinary

Overcoming the doping bottleneck in semiconductors

SH Wei

COMPUTATIONAL MATERIALS SCIENCE (2004)

Article Materials Science, Multidisciplinary

Ab initio modeling of surface structure for SrTiO3 perovskite -: art. no. 235417

E Heifets et al.

PHYSICAL REVIEW B (2001)