☆ 4.7 Article

Inhibition effect of imidazolium-based ionic liquids on pyrophorisity of FeS

JOURNAL OF MOLECULAR LIQUIDS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

An integration method using distributed optical fiber sensor and Auto-Encoder based deep learning for detecting sulfurized rust self-heating of crude oil tanks

Zhi-Chao Zhu et al.

Summary: This study focuses on temperature measurement and anomaly detection in sulfurized rust self-heating, using distributed optical fiber sensor (DOFS) and deep learning algorithms. The research successfully detected anomalies with a high accuracy level of 0.98, indicating the potential application of DOFS and deep learning in preventing accidents caused by sulfurized rust.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2022)

Add to Collection

Article Thermodynamics

THERMODYNAMIC MODEL AND KINETIC COMPENSATION EFFECT OF OIL SLUDGE PYROLYSIS BASED ON THERMOGRAVIMETRIC ANALYSIS

Hui Liu et al.

Summary: This study conducted pyrolysis experiments on oil sludge and found that high heating rates can promote the pyrolysis process. The thermodynamic models for the four oil sludge samples were all 3-D diffusion models. The research provides theoretical support for the industrialization, harmlessness, and resource utilization of oil sludge pyrolysis.

THERMAL SCIENCE (2022)

Add to Collection

Article Energy & Fuels

Experimental investigation of the drainage characteristic and stability mechanism of gel-stabilized foam used to extinguish coal fire

Quanlin Shi et al.

Summary: This study investigates the stability characteristics of gel-stabilized foam (GSF) through the analysis of foam half-life, drainage process, microcosmic liquid film structure, and stability mechanism. The results show that the GSF exhibits a unique three-stage drainage process and the formation of a gel structure enhances its stability. SEM-EDS analysis reveals the composition of the gelified film, which mainly consists of O, C, and Na elements derived from polymer and surfactant molecules. The gelified film in GSF delays bubble coarsening and drainage rate, reducing the coalescence and rupture rate. Furthermore, GSF demonstrates superior fire-resistance characteristics and coverage effect on the heat source. The study suggests that GSF has great potential for applications involving the extinguishment of coal fires.

FUEL (2022)

Add to Collection

Article Energy & Fuels

Mechanochemical effect of spontaneous combustion of sulfide ore

Hui Liu et al.

Summary: This study investigates the influence of mechanical activation on the spontaneous combustion of sulfide ore by studying the changes in microstructure and kinetics. Results show that mechanical activation enhances reactivity, increases reaction rate, and shifts the reaction towards lower temperatures.

FUEL (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Thermodynamics of Imidazolium-Based Ionic Liquids for Inhibiting the Spontaneous Combustion of Sulfide Ore

Jiaxin Tian et al.

Summary: Spontaneous combustion of sulfide ore is a common disaster in mining, storage, and transportation, affecting sustainable development. Imidazolium-based ionic liquids, especially [BMIM][NO3], show significant inhibition effects on the spontaneous combustion of sulfide ores.

SUSTAINABILITY (2022)

Add to Collection

Article Thermodynamics

Analysis of Coal Spontaneous Combustion by Thermodynamic Methods

Zhilin Xi et al.

Summary: The article summarizes the assessment methods for the spontaneous combustion tendency of coal, including two types of heating rate methods - single and multi-scan methods. The theoretical basis, advantages, and disadvantages of these methods are described, and they are applied to interpret the oxygen absorption stage of Shaanxi bituminous coal.

COMBUSTION SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

Mapping the knowledge domains of research on corrosion of petrochemical equipment: An informetrics analysis-based study

Zhihui Lang et al.

Summary: Research on corrosion of petrochemical equipment has made significant progress in basic theory and research systems, with emerging research directions and broad frontiers. Core development paths include research on corrosion mechanism, anti-corrosion mechanism, microbial corrosion, and corrosion detection and monitoring. The research path is gradually evolving towards nano anti-corrosion materials, with new frontiers in simulation, biofuels, and composites.

ENGINEERING FAILURE ANALYSIS (2021)

Add to Collection

Article Engineering, Chemical

Numerical Analysis of the Spontaneous Combustion Accidents of Oil Storage Tanks Containing Sulfur

Zijun Li et al.

Summary: This study constructed a two-dimensional model of storage tank wall using COMSOL Multiphysics software, indicating that the heat source intensity and air convection heat transfer coefficient are important factors influencing spontaneous combustion of the tank; different heat release rates in varying oxidation stages lead to distinct temperature growth trends.

PROCESSES (2021)

Add to Collection

Article Engineering, Chemical

Evaluation of the spontaneous combustion tendency of corrosion products in oil tanks based on TOPSIS methodologies

Hui Liu et al.

Summary: Thermogravimetry was used to obtain thermodynamic parameters of corrosion products in oil tanks, and then the CRITIC method was applied to calculate objective weights for evaluation indexes. The TOPSIS theory was used for comprehensive evaluation of the spontaneous combustion tendency. The results showed that the mass loss rate at the ignition point had the highest weight in determining spontaneous combustion tendency, and higher heating rates resulted in stronger tendencies for spontaneous combustion.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2021)

Add to Collection

Article Thermodynamics

Macrocharacteristics and the inhibiting effect of coal spontaneous combustion with various treatment durations of ionic liquids

Yang Xiao et al.

Summary: The inhibiting effect of two ionic liquids on coal spontaneous combustion was investigated by treating coal samples for various durations and conducting thermogravimetry-differential scanning calorimetry experiments at different heating rates. The study optimized treatment durations for the strongest inhibiting ability and validated the results through kinetic analysis, ultimately finding that treatment with 1-Butyl-3-methylimidazolium iodide for 180 days had the optimal inhibiting effect.

THERMOCHIMICA ACTA (2021)

Add to Collection

Article Engineering, Mechanical

Cause analysis and prevention measures of fire and explosion caused by sulfur corrosion

Rongrong Yang et al.

ENGINEERING FAILURE ANALYSIS (2020)

Add to Collection

Article Energy & Fuels

Visualization and analysis of mapping knowledge domains for spontaneous combustion studies

Hui Liu et al.

FUEL (2020)

Add to Collection

Article Engineering, Environmental

Thermal decomposition kinetics analysis of the oil sludge using model-based method and model-free method

Hui Liu et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

Add to Collection

Article Engineering, Environmental

Study on the effect of ionic liquids on coal spontaneous combustion characteristic by microstructure and thermodynamic

Xian Xi et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

Add to Collection

Review Energy & Fuels

Overview of commonly used materials for coal spontaneous combustion prevention

Qing-Wei Li et al.

FUEL (2020)

Add to Collection

Article Engineering, Environmental

Experimental investigation on using ionic liquid to control spontaneous combustion of lignite

Zujin Bai et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

Add to Collection

Article Thermodynamics

Treating bituminous coal with ionic liquids to inhibit coalspontaneous combustion

Yang Xiao et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Thermodynamics

Thermal effect of ionic liquids on coal spontaneous combustion

Jun Deng et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Thermodynamics

Inhibition ability of ionic liquid [Bmim][NO3], [Bmim][BF4], and [Emim][BF4] on spontaneous coal combustion

Yi Yang et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2018)

Add to Collection

Article Engineering, Chemical

Investigation of the pyrophoric tendency of the powder of corrosion products in an oil tank

Hui Liu et al.

POWDER TECHNOLOGY (2018)

Add to Collection

Article Energy & Fuels

Non-isothermal kinetic study of bituminous coal and lignite conversion in air and in argon/air mixtures

Konstantin Vitalievich Slyusarskiy et al.

FUEL (2017)

Add to Collection

Article Thermodynamics

Experimental study on the thermal properties of coal during pyrolysis, oxidation, and re-oxidation

Jun Deng et al.

APPLIED THERMAL ENGINEERING (2017)

Add to Collection

Article Thermodynamics

Thermal stability of imidazolium-based ionic liquids investigated by TG and FTIR techniques

Wen-quan Feng et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2016)

Add to Collection

Article Chemistry, Physical

Analysis of corrosion scales formed on steel at high temperatures in hydrocarbons containing model naphthenic acids and sulfur compounds

Peng Jin et al.

SURFACE AND INTERFACE ANALYSIS (2015)

Add to Collection

Article Engineering, Chemical

Kinetic analysis for spontaneous combustion of sulfurized rust in oil tanks

Zhan Dou et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2014)

Add to Collection

Review Thermodynamics

ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data

Sergey Vyazovkin et al.

THERMOCHIMICA ACTA (2011)

Add to Collection

Article Energy & Fuels

Prevention of spontaneous combustion of sulfur-containing oil tanks

Ping Li et al.

PETROLEUM SCIENCE AND TECHNOLOGY (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.