4.7 Article

Adsorption performance of tetracycline on NiFe layered double hydroxide hollow microspheres synthesized with silica as the template

Related references

Note: Only part of the references are listed.
Article Engineering, Environmental

Strong adsorption properties and mechanism of action with regard to tetracycline adsorption of double-network polyvinyl alcohol-copper alginate gel beads

Quan Liao et al.

Summary: Glutaraldehyde was used as a hydrophobic modifier to crosslink polyvinyl alcohol (PVA), while copper ions were immobilized by sodium alginate (SA) in this study. The resulting PVA-CA gel beads demonstrated high adsorption capacity for tetracycline (TC) in aqueous solutions, with a maximum adsorption capacity of 231.431 mg/g under optimal conditions. The adsorption process followed pseudo-second-order kinetic and Langmuir isothermal models, and was found to be spontaneous and endothermic. Additionally, cation bonding bridge reactions were identified as the main driving force behind the adsorption mechanism.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Engineering, Environmental

Synthesis of nano-silica and biogenic iron (oxyhydr)oxides composites mediated by iron oxidizing bacteria to remove antimonite and antimonate from aqueous solution: Performance and mechanisms

Rui Xu et al.

Summary: The study investigated the efficiency of nano-silica and biogenic iron (oxyhydr)oxides composites in removing antimony from wastewater, showing a high adsorption capacity for both Sb(III) and Sb(V), demonstrating the potential application of the synthetic material in antimony removal.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Engineering, Environmental

High-efficiency adsorption of phenanthrene by Fe3O4-SiO2-dimethoxydiphenylsilane nanocomposite: Experimental and theoretical study

Zhengwen Wei et al.

Summary: The Fe3O4-SiO2-2DMDPS nanocomposite showed excellent adsorption performance towards PHE, maintaining 75.97% adsorption capacity after four regeneration cycles. Homogeneous adsorption played a crucial role in the entire adsorption process, with film diffusion being the rate controlling procedure.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Engineering, Environmental

Facile fabrication of N-doped hierarchical porous carbons derived from soft-templated ZIF-8 for enhanced adsorptive removal of tetracycline hydrochloride from water

Zhe Zhang et al.

Summary: N-doped hierarchical porous carbons were successfully prepared and showed promising performance in tetracycline hydrochloride adsorption. Introduction of SDBS in the ZIF-8 precursor improved the pore structure of the carbon materials and increased nitrogen content and surface functional groups.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Engineering, Environmental

Effect of ZnFe-LDHs modified oyster shell on the removal of tetracyclines antibiotics and variation of tet genes in vertical flow constructed wetlands

Xin-gang Yang et al.

Summary: The emission of residual antibiotics has caused environmental hazards. The use of ZnFe-layered double hydroxides (ZnFe-LDHs) modified substrates in constructed wetlands was found to significantly improve the removal efficiency of tetracycline and oxytetracycline, and reduce the accumulation of antibiotic resistance genes.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Synthesis of MgNiCo LDH hollow structure derived from ZIF-67 as superb adsorbent for Congo red

Xing Wang et al.

Summary: In this study, MgNiCo LDH hollow structure with large specific surface area and porous structure was fabricated using a solvothermal method. The as-prepared sample exhibited efficient adsorption for Congo red in water and showed good stability and recycling ability.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Engineering, Chemical

A novel strategy of pulsed electro-assisted pyrite activation of peroxymonosulfate for the degradation of tetracycline hydrochloride

Xiaojiao Chen et al.

Summary: A novel process of natural pyrite superimposed pulsed electro-assisted activation peroxymonosulfate (PMS) for contamination treatment was developed in this study. Pyrite was found to effectively activate PMS to degrade contaminants and improve TCH removal efficiency, while reducing energy consumption. The study provides new insights into PMS activation by iron-based catalyst and electrochemistry.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Chemistry, Physical

Natural biodegradable polymeric bioadsorbents for efficient cationic dye encapsulation from wastewater

Munjur Hasan et al.

Summary: This study investigated the use of wheat flour as a biodegradable adsorbent for efficient removal of cationic dye from water sources. The adsorbent exhibited high adsorption efficiency, sensitivity, and reusability. The research findings suggest that wheat flour shows promise as a bio-adsorbent for water treatment applications.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Article Chemistry, Physical

Hierarchical porous nickel supported NiFeOxHy nanosheets for efficient and robust oxygen evolution electrocatalyst under industrial condition

Bo Zhong et al.

Summary: Hydrogen is considered as the most promising alternative energy carrier for the future energy system. Water electrolysis, as an innovative method for green hydrogen production, is hindered by the slow kinetics of the oxygen evolution reaction (OER). The development of efficient and robust electrocatalysts for OER is crucial for promoting the hydrogen industry.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Article Engineering, Environmental

One-pot thermal polymerization route to prepare N-deficient modified g-C3N4 for the degradation of tetracycline by the synergistic effect of photocatalysis and persulfate-based advanced oxidation process

Haoran Sun et al.

Summary: A nitrogen-deficient g-C3N4 (CNx) photocatalyst was synthesized through thermal polymerization of urea and oxamide for tetracycline degradation under visible light with persulfate activation. The CNx/PS system showed high efficiency in degrading TC, with factors like catalyst and PS dosage, initial TC concentration, and pH affecting the degradation process. LC-MS analysis was used to identify intermediate products, and toxicity of the TC solution was effectively reduced after degradation.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Engineering, Environmental

Review on nickel-based adsorption materials for Congo red

Yingqiu Zheng et al.

Summary: The excessive presence of synthetic dyestuffs in aquatic environments can lead to ecological and health issues that are harmful to sustainable development. Adsorption is considered an effective method for removing dye pollutants from water due to its efficiency, cost-effectiveness, ease of operation, and lack of secondary pollution. Among various dyes, Congo red is a commonly used azo dye. Nickel-based materials have been extensively studied for Congo red adsorption due to their diverse morphology, large specific surface area, and strong affinity towards Congo red. However, the challenge remains in creating nickel-based adsorbents with high efficiency, stability, and recyclability for practical applications.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Review Chemistry, Multidisciplinary

Heterojunction photocatalysts for degradation of the tetracycline antibiotic: a review

Xinghou He et al.

Summary: Antibiotic pollution poses a significant health issue, highlighting the need for improved methods for cleaning water and wastewater. Heterojunction photocatalysis has been proven as an effective approach for degrading antibiotics and enhancing treatment efficiency.

ENVIRONMENTAL CHEMISTRY LETTERS (2021)

Article Green & Sustainable Science & Technology

Staged and efficient removal of tetracycline and Cu2+ combined pollution: A designed double-chamber electrochemistry system using 3D rGO

Lu-Lu Long et al.

Summary: This study established an efficient treatment process for combined antibiotics and heavy ion pollution using a designed electrochemical double-chamber system with three-dimensional reduced graphene as the electrode material. High removal efficiencies of tetracycline and copper ions at low concentrations were achieved, and a staged disposal method based on this system showed higher efficiency compared to a general electrochemistry system.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Materials Science, Paper & Wood

In situ nano-assembly of Mg/Al LDH embedded on phosphorylated cellulose microspheres for tetracycline hydrochloride removal

Cong Yang et al.

Summary: In this study, Mg/Al layered double hydroxides embedded phosphorylated cellulose microspheres (Mg/Al LDH@PCMs) were prepared using an in situ nano-assembly method. Characterization was done through SEM, BET, FT-IR, XRD, zeta potential, and XPS. Mg/Al LDH@PCMs showed promising adsorption performance in water treatment applications.

CELLULOSE (2021)

Article Chemistry, Applied

H2O molecule adsorption on s-triazine-based g-C3N4

Bicheng Zhu et al.

Summary: This study investigates the adsorption of H2O molecules on s-triazine-based g-C3N4 through first-principle calculations, revealing the crucial role of intermolecular hydrogen bonds and the high reproducibility of the adsorption system.

CHINESE JOURNAL OF CATALYSIS (2021)

Review Chemistry, Multidisciplinary

A review on pollution situation and treatment methods of tetracycline in groundwater

Yingjie Dai et al.

SEPARATION SCIENCE AND TECHNOLOGY (2020)

Article Agricultural Engineering

Use of chicken feather and eggshell to synthesize a novel magnetized activated carbon for sorption of heavy metal ions

Abolfazl Rahmani-Sani et al.

BIORESOURCE TECHNOLOGY (2020)

Article Chemistry, Multidisciplinary

Integrating Rh Species with NiFe-Layered Double Hydroxide for Overall Water Splitting

Bowei Zhang et al.

NANO LETTERS (2020)

Article Chemistry, Physical

NiFe-LDH nanosheet/carbon fiber nanocomposite with enhanced anionic dye adsorption performance

Haojun Hu et al.

APPLIED SURFACE SCIENCE (2020)

Review Biotechnology & Applied Microbiology

Microbial degradation of tetracycline in the aquatic environment: a review

Sicheng Shao et al.

CRITICAL REVIEWS IN BIOTECHNOLOGY (2020)

Article Engineering, Environmental

Improving cesium removal to clean-up the contaminated water using modified conjugate material

Md. Rabiul Awual et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Article Biochemistry & Molecular Biology

Study on adsorption of tetracycline by Cu-immobilized alginate adsorbent from water environment

Xiaonuo Zhang et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

Article Chemistry, Physical

2D-2D growth of NiFe LDH nanoflakes on montmorillonite for cationic and anionic dye adsorption performance

De Bin Jiang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Article Chemistry, Physical

Hierarchical C/NiO-ZnO nanocomposite fibers with enhanced adsorption capacity for Congo red

Hua Chen et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Article Environmental Sciences

Analyses of tetracycline adsorption on alkali-acid modified magnetic biochar: Site energy distribution consideration

Yaoyu Zhou et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Article Engineering, Environmental

Hierarchical honeycomb-like Pt/NiFe-LDH/rGO nanocomposite with excellent formaldehyde decomposition activity

Yuanyuan Wang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Review Environmental Sciences

Adsorptive removal of antibiotics from water over natural and modified adsorbents

Jamiu O. Eniola et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)

Article Environmental Sciences

Fate of tetracycline in enhanced biological nutrient removal process

Hang Liu et al.

CHEMOSPHERE (2018)

Article Chemistry, Physical

Chestnut husk-like nickel cobaltite hollow microspheres for the adsorption of Congo red

Hua Chen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Chemistry, Physical

Simultaneously efficient adsorption and photocatalytic degradation of tetracycline by Fe-based MOFs

Dongbo Wang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2018)

Article Chemistry, Physical

Starch-NiFe-layered double hydroxide composites: Efficient removal of methyl orange from aqueous phase

Mukarram Zubair et al.

JOURNAL OF MOLECULAR LIQUIDS (2018)

Article Chemistry, Multidisciplinary

Removal of tetracycline by aerobic granular sludge and its bacterial community dynamics in SBR

Xiaochun Wang et al.

RSC ADVANCES (2018)

Article Chemistry, Physical

Hierarchical flower-like nickel(II) oxide microspheres with high adsorption capacity of Congo red in water

Yingqiu Zheng et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2017)

Article Engineering, Chemical

Removal of tetracycline by magnetic chitosan nanoparticles from medical wastewaters

Parinaz Raeiatbin et al.

DESALINATION AND WATER TREATMENT (2017)

Article Chemistry, Physical

Isoelectric point and adsorption activity of porous g-C3N4

Bicheng Zhu et al.

APPLIED SURFACE SCIENCE (2015)

Article Chemistry, Multidisciplinary

Core-shell SiO2@LDHs with tuneable size, composition and morphology

Chunping Chen et al.

CHEMICAL COMMUNICATIONS (2015)

Article Chemistry, Multidisciplinary

Removal of Tetracycline from Wastewater by Activated Carbons

J. Chen et al.

ASIAN JOURNAL OF CHEMISTRY (2013)

Article Engineering, Environmental

Kinetic study of tetracycline adsorption on sludge-derived adsorbents in aqueous phase

R. Ocampo-Perez et al.

CHEMICAL ENGINEERING JOURNAL (2012)

Article Chemistry, Physical

Adsorption and removal of tetracycline antibiotics from aqueous solution by graphene oxide

Yuan Gao et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2012)

Article Engineering, Environmental

Assessment of the efficiency of photocatalysis on tetracycline biodegradation

V. Maroga Mboula et al.

JOURNAL OF HAZARDOUS MATERIALS (2012)

Article Chemistry, Physical

Systematic study of synergistic and antagonistic effects on adsorption of tetracycline and copper onto a chitosan

Jin Kang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2010)

Article Chemistry, Multidisciplinary

Removal of the antibiotic tetracycline by Fe-impregnated SBA-15

Bao Khanh Vu et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2010)