☆ 4.7 Article

Eco-friendly recovery of base and precious metals from waste printed circuit boards by step-wise glycine leaching: Process optimization, kinetics modeling, and comparative life cycle assessment

JOURNAL OF CLEANER PRODUCTION (2023)

Related references

Note: Only part of the references are listed.

Article Green & Sustainable Science & Technology

Recovery of Copper and Aluminum from Spent Lithium-Ion Batteries by Froth Flotation: A Sustainable Approach

Roozbeh Saneie et al.

Summary: One of the key challenges in recycling spent batteries is the efficient and low-cost separation of copper and aluminum. This study presents a feasible solution using froth flotation to completely recover and recycle pure copper and aluminum from end-of-life batteries.

JOURNAL OF SUSTAINABLE METALLURGY (2022)

Add to Collection

Article Engineering, Chemical

Thermodynamic analysis of gold leaching by copper-glycine-thiosulfate solutions using Eh-pH and species distribution diagrams

Jian Wang et al.

Summary: This paper proposes a novel copper-catalytic glycine thiosulfate collaborative system for gold leaching and constructs relevant thermodynamic diagrams and electrochemical models. The results show that this system has a wider pH range and lower consumption, providing a theoretical basis for gold leaching.

MINERALS ENGINEERING (2022)

Add to Collection

Article Engineering, Chemical

Extraction of precious metals from waste printed circuit boards using cyanide-free alkaline glycine solution in the presence of an oxidant

Huan Li et al.

Summary: This study provides a greener approach to extract precious metals from waste printed circuit boards using alkaline glycine solution in the presence of an oxidant. Two oxidants, potassium permanganate and potassium ferricyanide, were compared in alkaline media. The results showed that decreasing particle size and increasing oxidant concentration significantly enhanced gold extraction.

MINERALS ENGINEERING (2022)

Add to Collection

Article Engineering, Environmental

Development of an integrated glycine-based process for base and precious metals recovery from waste printed circuit boards

H. Li et al.

RESOURCES CONSERVATION AND RECYCLING (2022)

Add to Collection

Article Environmental Sciences

Green extraction of nickel and valuable metals from pyrrhotite samples with different crystallographic structures through acidophilic bioleaching

Gholamreza Khodadadmahmoudi et al.

Summary: The utilization of low-grade nickel resources, such as pyrrhotite containing nickel, is important due to nickel's strategic status in the global market. This study conducted experiments and analyses to determine the bioleaching capability and mechanism of extracting nickel from hexagonal and monoclinic pyrrhotite. The results showed high nickel extraction rates, and the bioleached residues were deemed environmentally safe.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2022)

Add to Collection

Article Chemistry, Physical

Cobalt and lithium leaching from waste lithium ion batteries by glycine

Mengjun Chen et al.

Summary: This study developed an effective and environmentally-friendly approach for leaching cobalt and lithium from waste lithium-ion batteries using green glycine, achieving high leaching rates and controlled by interfacial chemical reactions. XRD analysis confirmed the decomposition of LiCoO2 after leaching, providing a novel approach for green recovery of waste LIBs in the future.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Review Engineering, Chemical

A review of thiocyanate gold leaching - Chemistry, thermodynamics, kinetics and processing

Atefeh Azizitorghabeh et al.

Summary: Thiocyanate is a promising alternative gold lixiviant with low toxicity compared to cyanide, but its commercialization has been hindered by the higher redox potential required for the process. Gold leaching using thiocyanate is an electrochemical reaction that requires an oxidant, mainly ferric, and a specific molar ratio of oxidant to thiocyanate for efficient gold oxidation kinetics. Recovery of solubilized gold-thiocyanate species from the pregnant leach solution can be achieved through various methods, such as activated carbon adsorption and ion exchange.

MINERALS ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Effect of Acid Leaching Pre-Treatment on Gold Extraction from Printed Circuit Boards of Spent Mobile Phones

Nicolo Maria Ippolito et al.

Summary: The study explored the effectiveness of a preliminary acid leaching process for recovering gold from spent mobile phone printed circuit boards. Two hydrometallurgical routes were tested to recover copper first to prevent competition with gold in the subsequent thiourea leaching. The recovery rates of copper and gold varied depending on the route and operational parameters.

MATERIALS (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Recovery of copper and the deportment of other base metals from alkaline glycine leachates derived from waste printed circuit boards (WPCBs)

Huan Li et al.

Summary: A novel approach for extracting copper from waste printed circuit boards using glycine solutions was reported, with the investigation of three recovery options: hydrazine reduction, sulphide precipitation, and solvent extraction. Each method showed different levels of copper recovery and effectiveness in metal extraction.

HYDROMETALLURGY (2021)

Add to Collection

Article Engineering, Environmental

Comparative analysis of I2-KI and HNO3 leaching in a life cycle perspective: Towards sustainable recycling of end-of-life c-Si PV panel

Jaeshik Chung et al.

Summary: An investigation of an iodine-iodide system as a lixiviant for leaching precious metals from end-of-life c-Si photovoltaic (PV) cells showed high leaching efficiency and reproducibility, with environmental impacts effectively reduced compared to HNO3 through rejuvenation of the iodine leaching solution.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Engineering, Chemical

Leaching of a polymetal gold ore and reducing cyanide consumption using cyanide-glycine solutions

Kianoush Barani et al.

Summary: The study investigated the leaching of a polymetal gold ore using a synergistic lixiviant mixture of cyanide and glycine. Increasing cyanide concentration from 500 to 1500 ppm resulted in a higher gold dissolution rate. However, using 0.5-1 M/L glycine in 500 ppm cyanide can achieve 90% gold dissolution with increased copper dissolution.。Reducing cyanide consumption by approximately 80% was achieved at the optimal approach, but increasing glycine concentration also led to higher dissolution of other metals like Pb, Zn, Fe, Ag, and Cu.

MINERALS ENGINEERING (2021)

Add to Collection

Article Engineering, Chemical

Recycling copper and gold from e-waste by a two-stage leaching and solvent extraction process

Mudila Dhanunjaya Rao et al.

Summary: The new hydrometallurgical route allows for the complete recycling of copper and gold from WPCBs under relatively benign laboratory conditions, serving as a proof of concept for liberating valuable and critical metals back into active service from end-of-life electronic devices.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Estimating Recycling Return of Integrated Circuits Using Computer Vision on Printed Circuit Boards

Leandro H. de S. Silva et al.

Summary: Technological advancements have led to improvements in daily life, but also raised concerns about how to deal with electronic waste, particularly waste PCBs. Recycling waste PCBs, which contain precious materials and components, is challenging due to their diverse composition. A proposed method aims to evaluate the economic feasibility of recycling ICs from WPCBs, involving estimating IC area and weight, and determining the potential metal recovery. The use of deep learning models like YOLO has shown promising results in detecting ICs from WPCBs, with the potential to extract a significant amount of metals and silicon elements for recycling.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Environmental Sciences

An Alkaline Glycine-Based Leach Process of Base and Precious Metals from Powdered Waste Printed Circuit Boards

Elsayed A. Oraby et al.

WASTE AND BIOMASS VALORIZATION (2020)

Add to Collection

Article Engineering, Environmental

Extraction of copper and the co-leaching behaviour of other metals from waste printed circuit boards using alkaline glycine solutions

Huan Li et al.

RESOURCES CONSERVATION AND RECYCLING (2020)

Add to Collection

Review Engineering, Environmental

Review and new life cycle assessment for rare earth production from bastnasite, ion adsorption clays and lateritic monazite

Gwendolyn Bailey et al.

RESOURCES CONSERVATION AND RECYCLING (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Waste-Printed Circuit Board Recycling: Focusing on Preparing Polymer Composites and Geopolymers

Qin Wang et al.

ACS OMEGA (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Current trends in direct transformation of waste printed circuit boards (WPCBs) into value-added materials and products

Rasoul Khayyam Nekouei et al.

CURRENT OPINION IN GREEN AND SUSTAINABLE CHEMISTRY (2020)

Add to Collection

Article Engineering, Chemical

Glycine leaching of Sarcheshmeh chalcopyrite concentrate at high pulp densities in a stirred tank reactor

Maryam Khezri et al.

MINERALS ENGINEERING (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Gold leaching from oxide ores in alkaline glycine solutions in the presence of permanganate

E. A. Oraby et al.

HYDROMETALLURGY (2020)

Add to Collection

Article Environmental Sciences

Environmental and economic performance analysis of recycling waste printed circuit boards using life cycle assessment

Prakash Pokhrel et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2020)

Add to Collection

Article Engineering, Chemical

Copper extraction from waste printed circuit boards by glycine

Yunhui Han et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Engineering, Environmental

Development of thermoplastic composites based on recycled polypropylene and waste printed circuit boards

Ramona Marina Grigorescu et al.

WASTE MANAGEMENT (2020)

Add to Collection

Article Engineering, Chemical

Leaching and recovery of gold from ore in cyanide-free glycine media

Pelin Altinkaya et al.

MINERALS ENGINEERING (2020)

Add to Collection

Article Engineering, Environmental

Thiourea bioleaching for gold recycling from e-waste

Intan Nurul Rizki et al.

WASTE MANAGEMENT (2019)

Add to Collection

Article Engineering, Chemical

The sulfide precipitation behaviour of Cu and Au from their aqueous alkaline glycinate and cyanide complexes

Z. Deng et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Article Engineering, Environmental

Towards sustainable recycling processes: Wasted printed circuit boards as a source of economic opportunities

Idiano D'Adamo et al.

RESOURCES CONSERVATION AND RECYCLING (2019)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Kinetic study of copper leaching from chalcopyrite concentrate in alkaline glycine solution

Doyun Shin et al.

HYDROMETALLURGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Techno-economic and Life Cycle Analysis for Bioleaching Rare-Earth Elements from Waste Materials

Vicki S. Thompson et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Article Green & Sustainable Science & Technology

A strategy for synthesis of copper nanoparticles from recovered metal of waste printed circuit boards

Samy Yousef et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Engineering, Environmental

Mobile Phones-An asset or a liability: A study based on characterization and assessment of metals in waste mobile phone components using leaching tests

Meenakshi Hira et al.

JOURNAL OF HAZARDOUS MATERIALS (2018)

Add to Collection

Article Engineering, Environmental

Assessing the environmental footprint of the production of rare earth metals and alloys via molten salt electrolysis

Ehsan Vahidi et al.

RESOURCES CONSERVATION AND RECYCLING (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

An investigation into the leaching behaviour of copper oxide minerals in aqueous alkaline glycine solutions

B. C. Tanda et al.

HYDROMETALLURGY (2017)

Add to Collection

Review Engineering, Environmental

A critical review on the recycling of copper and precious metals from waste printed circuit boards using hydrometallurgy

Zebing Wu et al.

FRONTIERS OF ENVIRONMENTAL SCIENCE & ENGINEERING (2017)

Add to Collection

Article Engineering, Environmental

An initial life cycle assessment of rare earth oxides production from ion-adsorption clays

Ehsan Vahidi et al.

RESOURCES CONSERVATION AND RECYCLING (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Gold leaching in cyanide-starved copper solutions in the presence of glycine

E. A. Oraby et al.

HYDROMETALLURGY (2015)

Add to Collection

Review Green & Sustainable Science & Technology

Waste Printed Circuit Boards recycling: an extensive assessment of current status

B. Ghosh et al.

JOURNAL OF CLEANER PRODUCTION (2015)

Add to Collection

Article Metallurgy & Metallurgical Engineering

The selective leaching of copper from a gold-copper concentrate in glycine solutions

E. A. Oraby et al.

HYDROMETALLURGY (2014)

Add to Collection

Article Engineering, Environmental

An advanced study on the hydrometallurgical processing of waste computer printed circuit boards to extract their valuable content of metals

Ionela Birloaga et al.

WASTE MANAGEMENT (2014)

Add to Collection

Proceedings Paper Engineering, Industrial

Recycling Mobile Phone Impact on Life Cycle Assessment

Vi Kie Soo et al.

21ST CIRP CONFERENCE ON LIFE CYCLE ENGINEERING (2014)

Add to Collection

Article Engineering, Environmental

Potential Environmental Impacts of Light-Emitting Diodes (LEDs): Metallic Resources, Toxicity, and Hazardous Waste Classification

Seong-Rin Lim et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2011)

Add to Collection

Article Agricultural Engineering

Heavy metals extraction from municipal solid waste incineration fly ash using adapted metal tolerant Aspergillus niger

Jie Yang et al.

BIORESOURCE TECHNOLOGY (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Copper leaching behavior from waste printed circuit board in ammoniacal alkaline solution

Kazuya Koyama et al.

MATERIALS TRANSACTIONS (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.