☆ 4.7 Article

Experimental investigation on the performance of the asphalt mixture with ceramic fiber

JOURNAL OF CLEANER PRODUCTION (2023)

Related references

Note: Only part of the references are listed.

Review Construction & Building Technology

State of art review on the incorporation of fibres in asphalt pavements

Shenghua Wu et al.

Summary: This paper provides a thorough review of the use of fibres in asphalt pavements, covering fibre classification, dosages, methods of incorporation, performance evaluation, critical issues, and sustainability. It emphasizes that the type of fibre chosen is crucial for its effectiveness in asphalt incorporation.

ROAD MATERIALS AND PAVEMENT DESIGN (2023)

Add to Collection

Article Construction & Building Technology

Research on the micro-nano characteristic of basalt fiber and its impact on the performance of relevant asphalt mastic

Keke Lou et al.

Summary: Surface properties play a significant role in the performance of fiber composites. The modification of basalt fiber can enhance the rheological and interface adhesion properties of basalt fiber asphalt mastic, providing important guidance for the application and promotion of fiber asphalt pavements.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Recycled polyethylene and crumb rubber composites modified asphalt with improved aging resistance and thermal stability

Yuetan Ma et al.

Summary: In this study, CR/PE composites were used to improve the aging resistance of modified binder blends. The composites formed a thermoplastic elastomers (TPEs) network that resisted the aging severity of the binder blends. The well dispersed PE particles interacted with the diffused CR particles to form a network, enhancing the thermal behavior of the binder blends.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Construction & Building Technology

Study on fracture behaviour of basalt fibre reinforced asphalt concrete with plastic coupled cohesive model and enhanced virtual crack closure technique model

Peng Cao et al.

Summary: In this study, the fracture behavior of basalt fiber reinforced asphalt concrete (BFRAC) was investigated using the plastic coupled cohesive model and enhanced virtual crack closure technique (VCCT). The study showed that both the plastic coupled cohesive model and the enhanced VCCT model accurately simulate the load-cracking mouth opening displacement (P-CMOD) curves. The enhanced VCCT model, coupled with the Ramberg-Osgood elasto-plastic harden model, shows promise for studying the physical mechanism of the nonlinear fracture of BFRAC.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2022)

Add to Collection

Article Construction & Building Technology

Evaluation of Optimum Fiber Length in Fiber-Reinforced Asphalt Concrete

Hossein Noorvand et al.

Summary: This study shows that synthetic fiber reinforcement can increase the tensile strength of asphalt concrete and reduce cracking. Aramid fibers of around 20mm length have good bond strength with asphalt mastic and result in reasonable dispersion in the fiber-reinforced asphalt concrete. Nylon fibers also improve performance, but caution is needed to ensure even fiber dispersion.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2022)

Add to Collection

Article Construction & Building Technology

Effect of recycled polyethylene terephthalate (PET) fiber on the fracture resistance of asphalt mixtures

Jianmin Ma et al.

Summary: This study systematically analyzed the effects of PET fiber and asphalt mixture properties, as well as testing conditions, on the cracking resistance of asphalt mixtures. It was found that longer and thicker PET fibers with a rough surface can significantly improve the toughness of the asphalt mixtures. The loading rate in the current test method should be reduced.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Effect of Asphalt Mortar Viscoelasticity on Microstructural Fracture Behavior of Asphalt Mixture Based on Cohesive Zone Model

Haopeng Zhang et al.

Summary: This study investigates the effects of mesostructure characteristics of asphalt mixture on the fracture behavior of semicircular bending samples. It establishes a two-dimensional finite-element model considering viscoelastic properties and uses digital image processing technology and a cohesive zone model to validate the model. The study examines the crack initiation and propagation process, the damage distribution of cohesive elements, and the effects of mesostructure characteristics on damage and fracture behavior. It finds that increasing porosity leads to a decrease in ultimate bearing capacity and a propagation of cracks towards air voids. Weaker interface strength between aggregate and asphalt mortar decreases maximum bearing capacity and increases damage at the interface. Additionally, increasing initial crack length reduces bearing capacity, fracture energy, and creep dissipation energy.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2022)

Add to Collection

Article Construction & Building Technology

Experimental study and mechanism analysis on the basic mechanical properties of hydraulic basalt fiber asphalt concrete

Anxiong Long et al.

Summary: Based on experimental results, it was found that the basalt fiber content and length have significant effects on the compressive and tensile properties of hydraulic asphalt concrete. Increasing fiber length can decrease the number of cracks in the compressive failure mode, while increasing fiber content will increase the number of cracks. The deformability of the concrete is minimally affected by fiber length, but is significantly affected by fiber content.

MATERIALS AND STRUCTURES (2022)

Add to Collection

Article Construction & Building Technology

Study on the Water Stability of Polyurethane Concrete from Perspective of Polyurethane-Aggregate Interface

Bin Hong et al.

Summary: This study investigates the moisture damage resistance of PU concrete under water immersion and freeze-thaw cycle conditions, revealing the poor water stability of the PU-aggregate interface. The research provides a theoretical basis for developing PU suitable for pavement use.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2022)

Add to Collection

Article Construction & Building Technology

Short- and long-term properties of glass fiber reinforced asphalt mixtures

Mahmoud Enieb et al.

Summary: This study investigated the short- and long-term aged properties of glass fibre-reinforced asphalt mixtures, showing that longer fibres did not significantly affect the properties compared to shorter fibres. The orientation and concentration of glass fibre were found to have a noticeable influence on the mechanical response of the composite, with the potential to enhance durability of asphalt mixtures.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Potential Alternative to Styrene-Butadiene-Styrene for Asphalt Modification Using Recycled Rubber-Plastic Blends

Yuetan Ma et al.

Summary: This study explored the use of recycled rubber-plastic blends as an alternative modifier to SBS for asphalt modification, improving the performance of asphalt mixtures. The results showed that the recycled rubber-plastic-modified asphalt formed interacted continuous phases of rubber and plastic, enhancing the compatibility of binder blends and the performance of asphalt mixtures. Recycled rubber-plastic blends can be considered as a potentially suitable alternative for asphalt modification from both performance and economical perspectives.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Effect of aging on the constitutive models of asphalt and their mixtures

Lixing Ma et al.

Summary: This study investigated the dynamic mechanical behaviors and constitutive models of SBS modified asphalt and mixtures after different aging methods. The results showed that the complex modulus of asphalt significantly increased after aging, while the dynamic modulus of mixture showed an increasing trend with aging. Parameters in the Burgers model of asphalt mixture generally increased with aging, indicating changes in anti-deformation ability at different temperatures.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Investigation of the aging behavior of cellulose fiber in reclaimed asphalt pavement

Ning Li et al.

Summary: The study found that cellulose fiber undergoes a decrease in conventional and high temperature performance during the aging process, resulting in reduced cracking resistance of asphalt mortar. The fiber is oxidized and degraded during aging, leading to a decrease in performance. Additionally, the original hollow cellulose fiber gradually transforms into a flattened form after aging, causing a decrease in performance.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Compatibility and rheological characterization of asphalt modified with recycled rubber-plastic blends

Yuetan Ma et al.

Summary: This study focused on improving the compatibility of asphalt modified with recycled plastic and rubber, which has shown significant enhancement in physical properties through the increase of recycled rubber content, addition of compatibilizer, and use of pre-combined recycled rubber-plastic blends. These improvements present a promising pathway for large-scale commercial applications of plastic and rubber modified asphalt.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Characterization of asphalt mixtures produced with short Pulp Aramid fiber (PAF)

Saeed S. Saliani et al.

Summary: The study evaluated the impact of using Pulp Aramid Fiber in Hot Mix Asphalt and found that it can improve fatigue cracking resistance, enhance low temperature behavior, and delay cracking failure under repeated loading.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Effects of bamboo fiber on the mechanical properties of asphalt mixtures

Haichuan Jia et al.

Summary: The study investigated the effects of bamboo fiber on the mechanical properties of asphalt mixtures, demonstrating that the inclusion of bamboo fiber improves crack resistance and fatigue life. Moreover, dynamic modulus tests revealed that the addition of bamboo fiber increases the dynamic modulus values and decreases the phase angles of the asphalt mixtures.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Bamboo fiber has engineering properties and performance suitable as reinforcement for asphalt mixture

Kefei Liu et al.

Summary: Bamboo fiber has a significant impact on the properties of asphalt mixture, outperforming lignin fiber in improving thermal stability and reducing temperature sensitivity. Bamboo fiber asphalt mixture exhibits excellent road performance, especially in terms of high-temperature stability, low-temperature crack resistance, and moisture stability.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Comparative life cycle assessment of standard, cellulose-reinforced and end of life tires fiber-reinforced hot mix asphalt mixtures

Daniele Landi et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Engineering, Mechanical

The effect of basalt fibres on fracture toughness of asphalt mixture

Sadjad Pirmohammad et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Self-healing capability of asphalt mixture containing polymeric composite fibers under acid and saline-alkali water solutions

Benan Shu et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Construction & Building Technology

Effects of Silane-Coupling Agent Pretreatment on Basalt Fibers: Analyzing the Impact on Interfacial Properties and Road Performance

Li Liu et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

Acoustic Emission-Based Reinforcement Evaluation of Basalt and Steel Fibers on Low-Temperature Fracture Resistance of Asphalt Concrete

Yubo Jiao et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

Development and performance evaluation of epoxy asphalt concrete modified with glass fibre

Xi Wang et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2019)

Add to Collection

Review Construction & Building Technology

Mechanical performance of fibers in hot mix asphalt: A review

Carlos J. Slebi-Acevedo et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Evaluation of the ceramic fiber modified asphalt binder

Mahyar Arabani et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Effect of Water Content on Volumetric and Mechanical Properties of Cement Bitumen Emulsion Mixture

Jian Ouyang et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)

Add to Collection

Article Construction & Building Technology

Microfluidic synthesis. of polymeric fibers containing rejuvenating agent for asphalt self-healing

Benan Shu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Experimental Investigation of Effect of Ceramic Fibers on Mechanical Properties of Asphalt Mixtures

Mahyar Arabani et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)

Add to Collection

Article Construction & Building Technology

Characterization of asphalt mastics reinforced with basalt fibers

Xiao Qin et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Experimental Study of High-Performance Deicing Asphalt Mixture for Mechanical Performance and Anti-Icing Effectiveness

Tao Ma et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2018)

Add to Collection

Article Construction & Building Technology

Mechanistic evaluation of fatigue cracking in asphalt pavements

Amirhossein Norouzi et al.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2017)

Add to Collection

Article Biotechnology & Applied Microbiology

Superhydrophobic/superoleophilic corn straw fibers as effective oil sorbents for the recovery of spilled oil

Deli Zang et al.

JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2016)

Add to Collection

Article Engineering, Civil

Effect of Binder Modification on the Performance of an Ultra-Thin Overlay Pavement Preservation Strategy

Walaa S. Mogawer et al.

TRANSPORTATION RESEARCH RECORD (2016)

Add to Collection

Article Chemistry, Physical

Characteristics of Ceramic Fiber Modified Asphalt Mortar

Jiuming Wan et al.

MATERIALS (2016)

Add to Collection

Article Construction & Building Technology

Cracking resistance of fiber reinforced asphalt concrete at-20 °C

Philip Park et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Construction & Building Technology

Laboratory investigation on the brucite fiber reinforced asphalt binder and asphalt concrete

Rui Xiong et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Construction & Building Technology

Modelling the effects of temperature and loading rate on fatigue properties of hot mixed asphalt

Haifang Wen et al.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2014)

Add to Collection

Article Construction & Building Technology

Investigating the mechanical properties of carbon fibre-reinforced asphalt concrete

Fereidoon Moghadas Nejad et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2014)

Add to Collection

Article Construction & Building Technology

Microstructure and fracture morphology of carbon nano-fiber modified asphalt and hot mix asphalt mixtures

Mohammad J. Khattak et al.

MATERIALS AND STRUCTURES (2013)

Add to Collection

Article Construction & Building Technology

Low temperature cracking performance of WMA with the use of the Superpave indirect tensile test

Prabir Kumar Das et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Add to Collection

Article Materials Science, Multidisciplinary

New Trends in High-Performance Fibers and Fiber Technology

Michael R. Buchmeiser

MACROMOLECULAR MATERIALS AND ENGINEERING (2012)

Add to Collection

Article Mechanics

Fatigue crack growth in asphalt and asphalt-interfaces

E. K. Tschegg et al.

ENGINEERING FRACTURE MECHANICS (2011)

Add to Collection

Review Construction & Building Technology

Fiber-reinforced asphalt-concrete - A review

Sayyed Mandi Abtahi et al.

CONSTRUCTION AND BUILDING MATERIALS (2010)

Add to Collection

Article Construction & Building Technology

Properties of ceramic fiber reinforced cement composites

YP Ma et al.

CEMENT AND CONCRETE RESEARCH (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.