☆ 4.7 Article

Empirical and numerical study of pollutant leakage caused by human arm movement through machine enclosure

JOURNAL OF CLEANER PRODUCTION (2022)

Related references

Note: Only part of the references are listed.

Article Construction & Building Technology

Evaluation of SARS-COV-2 transmission and infection in airliner cabins

Wensi Wang et al.

Summary: Commercial airliners have played a significant role in the global spread of the SARS-CoV-2 virus. Using computational fluid dynamics, this study simulated the transmission of the virus on two flights. The results suggest that wearing masks and reducing conversation frequency can help mitigate the risk of exposure to the virus.

INDOOR AIR (2022)

Add to Collection

Article Construction & Building Technology

Pollutant capture efficiencies in and around the opening surface of a fume hood under realistic conditions

Ryota Muta et al.

Summary: This study analyzed the pollutant capture efficiency of a fume hood using computational fluid dynamics and quantitatively evaluated the impact of ventilation efficiency indices. The results showed that the presence of workers did not significantly affect the pollutant capture efficiency, while changing the exhaust airflow rate did impact the distribution of pollutants in the chamber.

INDOOR AND BUILT ENVIRONMENT (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Sustainable laboratory evaluations: Optimized fume-hood- intensive ventilation and energy efficiency without compromising occupational safety and comfort

Yueyang He et al.

Summary: This study aims to explore alternative ventilation strategies for high-density laboratories, with the goal of optimizing energy efficiency while maintaining safety and comfort. The findings suggest that coordinating general and local exhausts can reduce ventilation requirements and achieve significant energy savings.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Construction & Building Technology

Investigation of airborne particle exposure in an office with mixing and displacement ventilation

Sumei Liu et al.

Summary: Effective ventilation is crucial in reducing the spread of COVID-19 in buildings. This study compared the performance of a mixing ventilation (MV) system and a displacement ventilation (DV) system in terms of air temperature and particle concentration. Increasing the ventilation rate reduced the particle concentration, but the improvement was not proportional to the ventilation rate. The DV system had a higher ventilation effectiveness than the MV system, making it a better choice for indoor air quality.

SUSTAINABLE CITIES AND SOCIETY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

A holistic performance assessment of duct-type electrostatic precipitators

Pan Wang et al.

Summary: Epidemiological surveys have shown a significant association between indoor airborne particle exposure and adverse health effects. The performance of commercially available duct-type electrostatic precipitators (ESPs) with and without dielectric coatings was evaluated, and ESPs with dielectric coatings showed enhanced removal efficiency of submicron particles and lower energy consumption compared to ESPs without dielectric coatings. The comprehensive evaluation of ESP performance should consider multiple criteria, including filtration efficiency for submicron particles and ozone emission rates.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Sequential air pollution emission estimation using a hybrid deep learning model and health-related ventilation control in a pig building

Qiuju Xie et al.

Summary: This study proposes a deep learning-driven model to estimate the emissions of ammonia, carbon dioxide, and hydrogen sulfide from pig buildings. It also suggests optimal ventilation control strategies to improve indoor air quality and health. Experimental results show that the model has high prediction accuracy and provides a feasible method for estimating air pollution emissions and ventilation control in pig buildings.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Construction & Building Technology

Five hypotheses concerned with bedroom environment and sleep quality: A questionnaire survey in Shanghai city, China

Xinbo Xu et al.

Summary: The research indicated that factors such as heat, cold, and noise in the bedroom environment significantly influence residents' sleep quality, while ventilation and plants can effectively improve sleep quality.

BUILDING AND ENVIRONMENT (2021)

Add to Collection

Article Construction & Building Technology

Effects of human walking on the capture efficiency of range hood in residential kitchen

Lipeng Lv et al.

Summary: The study investigated the flow characteristics induced by human walking and the effect on range hood performance in residential kitchens using transient CFD simulation. Results showed that human walking process could be divided into five stages, and the interaction between wake and thermal plume was the main reason for thermal plume fluctuation. The study also introduced the air curtain range hood to resist the effect of human walking, showing that it could prevent the effect with less air volume increment compared to increasing exhaust rate, thus saving energy.

BUILDING AND ENVIRONMENT (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Energy benchmarking and ventilation related energy saving potentials for SMEs in Greater Toronto Area

Tamima Ahmed et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Construction & Building Technology

Comprehensive performance evaluation of a novel Aaberg exhaust system reinforced by a swirling jet

Runmin Zhao et al.

BUILDING AND ENVIRONMENT (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Effect of press-in ventilation technology on pollutant transport in a railway tunnel under construction

Yang Zhou et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Environmental Sciences

An improved displacement ventilation system for a machining plant

Guanqiong Wei et al.

ATMOSPHERIC ENVIRONMENT (2020)

Add to Collection

Article Construction & Building Technology

Flow characteristics and pollutant removal effectiveness of multi -vortex ventilation in high pollution emission industrial plant with large aspect ratio

Zhixiang Cao et al.

SUSTAINABLE CITIES AND SOCIETY (2020)

Add to Collection

Article Construction & Building Technology

Energy analysis of three ventilation systems for a large machining plant

Chuanming Chen et al.

ENERGY AND BUILDINGS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Migration characteristics of CO under forced ventilation after excavation roadway blasting: A case study in a plateau mine

Rui Huang et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Dispersion characteristics of dust pollutant in a typical coal roadway under an auxiliary ventilation system

Fan Geng et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Editorial Material Construction & Building Technology

Energy efficiency of industrial buildings

Yi Wang et al.

INDOOR AND BUILT ENVIRONMENT (2019)

Add to Collection

Article Economics

Will economic infrastructure development affect the energy intensity of China's manufacturing industry?

Boqiang Lin et al.

ENERGY POLICY (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Manufacturing industrial structure and pollutant emission: An empirical study of China

Zheng Wang et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Construction & Building Technology

Dynamic meshing modelling for particle resuspension caused by swinging manikin motion

Y. Tao et al.

BUILDING AND ENVIRONMENT (2017)

Add to Collection

Article Environmental Sciences

Strategy for Studying Ventilation Performance in Factories

Jie Zhang et al.

AEROSOL AND AIR QUALITY RESEARCH (2016)

Add to Collection

Article Engineering, Chemical

Physicochemical characterization of oily particles emitted from different machining processes

Jie Zhang et al.

JOURNAL OF AEROSOL SCIENCE (2016)

Add to Collection

Article Green & Sustainable Science & Technology

Assessment of mine ventilation systems and air pollution impacts on artisanal tanzanite miners at M-erelani, Tanzania

Laurent Paul Mayala et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Add to Collection

Article Construction & Building Technology

The influence of human walking on the flow and airborne transmission in a six-bed isolation room: Tracer gas simulation

Jian Hang et al.

BUILDING AND ENVIRONMENT (2014)

Add to Collection

Article Construction & Building Technology

A review of the performance of different ventilation and airflow distribution systems in buildings

Guangyu Cao et al.

BUILDING AND ENVIRONMENT (2014)

Add to Collection

Article Construction & Building Technology

Large-eddy simulation of human-induced contaminant transport in room compartments

J. -I. Choi et al.

INDOOR AIR (2012)

Add to Collection

Article Construction & Building Technology

Numerical investigation of influence of human walking on dispersion and deposition of expiratory droplets in airborne infection isolation room

Jinliang Wang et al.

BUILDING AND ENVIRONMENT (2011)

Add to Collection

Article Thermodynamics

Large Eddy Simulations and Experiments of Flow Around Finite-Height Cylinders

Guillermo Palau-Salvador et al.

FLOW TURBULENCE AND COMBUSTION (2010)

Add to Collection

Review Construction & Building Technology

Ventilation performance prediction for buildings: A method overview and recent applications

Qingyan Chen

BUILDING AND ENVIRONMENT (2009)

Add to Collection

Article Thermodynamics

Evaluation of various turbulence models in predicting airflow and turbulence in enclosed environments by CFD: Part 2-comparison with experimental data from literature

Zhao Zhang et al.

HVAC&R RESEARCH (2007)

Add to Collection

Article Public, Environmental & Occupational Health

Exposure assessment to suggest the cause of sinusitis developed in grinding operations utilizing soluble metalworking fluids

D Park et al.

JOURNAL OF OCCUPATIONAL HEALTH (2005)

Add to Collection

Article Mathematics, Applied

Dynamic-mesh finite element method for Lagrangian computational fluid dynamics

I Malcevic et al.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.