☆ 4.7 Article

Feasibility of reuse of modified electrolytic aluminium spent refractory material in asphalt and assessment of its environmental stability

JOURNAL OF CLEANER PRODUCTION (2023)

Related references

Note: Only part of the references are listed.

Article Construction & Building Technology

Evaluation of interaction between emulsified asphalt and mineral powder using rheology

Wen Xu et al.

Summary: This study evaluated the interaction ability between emulsified asphalt and mineral powder based on rheological properties, applying K - B - G* and Delta G* models to measure the influence of temperature and loading frequency. Results showed that the physical interaction between emulsified asphalt and mineral powder is primarily physical in nature, with temperature having a greater impact than loading frequency. Additionally, the cationic emulsifier plays a significant role in enhancing the interaction between cationic emulsified asphalt and acid aggregate.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Quantifying the rejuvenation effects of soybean-oil on aged asphalt-binder using molecular dynamics simulations

Xiaorui Zhang et al.

Summary: This study utilized molecular dynamic simulations to construct molecular models of rejuvenators and analyze their regeneration performance and diffusion effects on aged asphalt-binders. The experimental results demonstrated that the rejuvenator significantly improved diffusion in aged asphalt-binders, showing promising storage stability and morphological distribution.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Recycling of spent refractory materials to produce Al-Si master alloys via the aluminum reduction cell

Wenyuan Hou et al.

Summary: This study explored a process for preparing Al-Si master alloys by recycling spent refractory material via aluminum electrolytic cells, which resulted in reduced energy consumption and alumina consumption, and achieved the goals of waste recycling and cleaner production.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Recovery of Copper and Cobalt from Converter Slags via Reduction-Sulfurization Smelting Using Spent Pot Lining as the Reductant

Hongliang Zhao et al.

Summary: In this study, a reduction-sulfurization smelting method was used to recover copper and cobalt from converter slags by using spent pot lining as the reductant. The experiments showed that under suitable conditions, copper and cobalt recovery rates exceeded 98% and 96%, respectively.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Design of Superhydrophobic Surfaces for Stable Perovskite Solar Cells with Reducing Lead Leakage

Hua Zhang et al.

Summary: The study demonstrates that designing superhydrophobic surfaces is an effective strategy for addressing environmental degradation and lead leakage in perovskite solar cells. By chemically modifying the perovskite film and metal electrode, a dense array is formed to enhance water and oxygen resistance and reduce surface defect density, ultimately improving efficiency and long-term stability of the solar cells.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Perovskite surface management by thiol and amine copper porphyrin for stable and clean solar cells

Chunling Li et al.

Summary: A surface management strategy using a copper porphyrin compound with thiol and secondary amine groups was developed to prevent lead leakage and improve the efficiency and stability of perovskite solar cells. The compound effectively binds to Pb defects on the perovskite surface and maintains high efficiency under different conditions, providing a new approach for fabricating stable and clean PSCs.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Robust and Versatile Coatings Engineered via Simultaneous Covalent and Noncovalent Interactions

Jiajing Zhou et al.

Summary: The study introduces a versatile and robust coating (pBDT-TA) self-assembled from tannic acid (TA) and a self-polymerizing aromatic dithiol (BDT), which can be precisely tuned in thickness on diverse substrates and exhibits high stability in various harsh aqueous environments. Moreover, the coating enables secondary reactions and easy integration of other compounds, showcasing its potential for diverse applications.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Engineering, Multidisciplinary

A facile and sustainable approach for simultaneously flame retarded, UV protective and reinforced poly(lactic acid) composites using fully bio-based complexing couples

Yuyang Zhou et al.

Summary: This study successfully fabricated flame retardant, UV protective, and reinforced poly(lactic acid) (PLA) composite via a solvent-free method, using bio-based complexing couples. The comprehensive evaluations on thermal properties, burning properties, UV protection, and tensile properties demonstrated that the composite materials showed significant improvements in various aspects.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Engineering, Environmental

Emission-to-ash detoxification mechanisms of co-combustion of spent pot lining and pulverized coal

Zihong Chen et al.

Summary: This study investigates the co-combustion of spent pot lining (SPL) with pulverized coal (PC) as a cost-effective method to reduce waste streams and environmental risks. The addition of PC enhances combustion efficiency of SPL, lowers leaching fluorine concentrations, and reduces gas emissions during waste-to-energy conversion.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Review Construction & Building Technology

Utilization of solid waste materials as alternative fillers in asphalt mixes: A review

Jayvant Choudhary et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Fabrication and performance evaluation of aminopropyl triethoxysilane-dopamine-MoS2 incorporated SBS modified asphalt

Yunhao Wei et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Study on the properties of GNPs/PS and GNPs/ODA composites incorporated SBS modified asphalt after short-term and long-term aging

Yunhao Wei et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Preparation and properties of soybean bio-asphalt/SBS modified petroleum asphalt

Jing Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

SUSTAINABLE WASTE-TREATMENT PROCEDURE FOR THE SPENT POTLINING (SPL) FROM ALUMINIUM PRODUCTION

Blaz Tropenauer et al.

MATERIALI IN TEHNOLOGIJE (2019)

Add to Collection

Article Chemistry, Physical

Hydrophilic and antifouling modification of PVDF membranes by one-step assembly of tannic acid and polyvinylpyrrolidone

Mu Li et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Construction & Building Technology

Research on properties of bitumen mortar containing municipal solid waste incineration fly ash

Kezhen Yan et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Review Chemistry, Physical

Supramolecular design and applications of polyphenol-based architecture: A review

Hongshan Liang et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Recovery of Carbon and Valuable Components from Spent Pot Lining by Leaching with Acidic Aluminum Anodizing Wastewaters

Xiaoming Li et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2019)

Add to Collection

Article Engineering, Chemical

Bioadhesion-inspired surface engineering constructing robust, hydrophilic membranes for highly-efficient wastewater remediation

Xiaobin Yang et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Competitive self-assembly driven as a route to control the morphology of poly(tannic acid) assemblies

Zhiqing Liu et al.

NANOSCALE (2019)

Add to Collection

Article Construction & Building Technology

Effect of polystyrene grafted graphene nanoplatelets on the physical and chemical properties of asphalt binder

Meizhao Han et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Rheology and thermal stability of polymer modified bitumen with coexistence of amorphous phase and crystalline phase

Tian Xia et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Production of eco-friendly permeable brick from debris

Chaoqun Zhou

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient Flame Detection and Early Warning Sensors on Combustible Materials Using Hierarchical Graphene Oxide/Silicone Coatings

Qian Wu et al.

ACS NANO (2018)

Add to Collection

Review Green & Sustainable Science & Technology

Asphalt mixtures emission and energy consumption: A review

Liseane Paclilha Thives et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Add to Collection

Review Environmental Sciences

Status of industrial fluoride pollution and its diverse adverse health effects in man and domestic animals in India

Shanti Lal Choubisa et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2016)

Add to Collection

Article Chemistry, Applied

Preparation and characterization of monodisperse, mesoporous natural poly(tannic acid)-silica nanoparticle composites with antioxidant properties

Nurettin Sahiner et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2016)

Add to Collection

Review Instruments & Instrumentation

Application of Fourier Transform Infrared (FTIR) Spectroscopy in the Characterization of Tannins

Arianna Ricci et al.

APPLIED SPECTROSCOPY REVIEWS (2015)

Add to Collection

Article Engineering, Chemical

Leaching of Spent Pot-Lining with Aluminum Anodizing Wastewaters: Fluoride Extraction and Thermodynamic Modeling of Aqueous Speciation

Diego F. Lisbona et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Recovery of carbon and cryolite from spent pot lining of aluminium reduction cells by chemical leaching

Shi Zhong-ning et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)

Add to Collection

Article Engineering, Chemical

Recovery of fluoride values from spent pot-lining: Precipitation of an aluminium hydroxyfluoride hydrate product

Diego Fernandez Lisbona et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2008)

Add to Collection

Article Biochemistry & Molecular Biology

Interactions of tannic acid and its derivatives (ellagic and gallic acid) with calf thymus DNA and bovine serum albumin using spectroscopic method

M Labieniec et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY B-BIOLOGY (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.