4.7 Article

Towards greener one-part geopolymers through solid sodium activators modification

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Degradation mechanism of hybrid fly ash/slag based geopolymers exposed to elevated temperatures

Y. Luo et al.

Summary: This study investigated the physicochemical properties of alkali-activated fly ash/GGBS (AAFS) up to 800 degrees C, revealing a linear relationship between crack density and ultrasonic pulse velocity. The addition of slag into geopolymers was found to reduce geopolymeric behaviors but further aggravate thermal damage under high temperatures. Conceptual models of AAF and AAFS were proposed to explain the degradation mechanism of low slag contained geopolymers.

CEMENT AND CONCRETE RESEARCH (2022)

Review Construction & Building Technology

Assessment of materials, design parameters and some properties of 3D concrete a state-of-the-art review

Hatice Gizem Sahin et al.

Summary: This article investigated the effects of materials used in 3DPC mixtures on the printability performance, especially rheological properties. It was found that the use of sulfoaluminate-cement improves the performance of 3DPC, while supplementary-cementitious-materials improve rheological properties. Additionally, the use of geopolymer, recycled aggregates, and waste materials can contribute to the sustainability of 3DPC.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Construction & Building Technology

Incorporation of bioleached sulfidic mine tailings in one-part alkali-activated blast furnace slag mortar

He Niu et al.

Summary: Sulfidic mine tailings, waste materials from mining and mineral processing, can contain high levels of sulfur and metal(loid)s even after bioleaching. A study found that one-part alkali-activated slag mortars are a promising solution for recycling sulfidic mine tailings due to their practicality, easy transportation, and user-friendly production. Incorporating up to 50 wt% mine tailings into these mortars resulted in the formation of C-(N)-AS-H gels and had a significant impact on their physical and chemical properties.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Construction & Building Technology

Characterization of one-part alkali-activated slag with rice straw ash

Kangting Yin et al.

Summary: The properties of one-part alkali-activated slag (AAS) with and without rice straw ash (RSA) are comprehensively investigated in this paper. The results show that RSA plays dual roles in AAS, as a precursor and an internal curing agent. The reactive K and Si in RSA participate in gel formation and the alkaline groups from the ash facilitate the hydrolysis of slag. Additionally, RSA absorbs and releases liquid, providing internal curing to the matrix and mitigating shrinkage issues.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Construction & Building Technology

Drying shrinkage of one-part alkali-activated slag concrete

Golnaz Sadeghian et al.

Summary: This study evaluated the influence of mix design parameters on the drying shrinkage of alkali-activated slag concrete (AASC) and found that the addition of silica fume significantly reduced drying shrinkage magnitude. Furthermore, the curing regime also had an impact on drying shrinkage.

JOURNAL OF BUILDING ENGINEERING (2022)

Article Construction & Building Technology

Roles of hybrid activators in improving the early-age properties of one-part geopolymer pastes

Yan-Shuai Wang et al.

Summary: The study aims to tailor the early-age properties of one-part fly ash/ground granulated blast-furnace slag geopolymer by using hybrid activators, including anhydrous sodium metasilicate, sodium carbonate, and sodium aluminate. The experimental results showed that Na2SiO3-activated geopolymer had faster setting, which could be improved by partial replacement with Na2CO3.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Green & Sustainable Science & Technology

Performance based energy, ecological and financial costs of a sustainable alternative cement

Chandana Kulasuriya et al.

Summary: This paper compares the energy, ecological impacts, and financial costs of Alkali Pozzolan Cement, High Volume Fly Ash cement, and Ordinary Portland Cement mixtures. The results suggest that APC has attractive costs in terms of energy, ecology, and finances, but OPC may still be the best choice in terms of carbonation exposure.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Environmental Sciences

Investigating embodied carbon, mechanical properties, and durability of high-performance concrete using ternary and quaternary blends of metakaolin, nano-silica, and fly ash

Rabinder Kumar et al.

Summary: Research on alternative binders has become a necessity due to issues with cement's embodied carbon, climate change, and depletion of natural resources. Using nano-silica and metakaolin in blended cement can significantly enhance the functional characteristics of concrete. Cost-benefit analysis shows that adding metakaolin and nano-silica may increase production costs, but it improves the performance of concrete.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Article Materials Science, Multidisciplinary

Comparative mechanical and microstructural properties of high calcium fly ash one-part geopolymers activated with Na2SiO3-anhydrous and NaAlO2

Ooi Wan-En et al.

Summary: This study investigates the effects of different solid alkali activators on one-part geopolymers, finding that the choice of activator significantly affects the properties and microstructural changes of the OPGs. Despite the differences, all the OPGs studied are suitable for building material applications.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Article Materials Science, Composites

Strength, Shrinkage and Early Age Characteristics of One-Part Alkali-Activated Binders with High-Calcium Industrial Wastes, Solid Reagents and Fibers

Dhruv Sood et al.

Summary: The study investigated the effects of different combinations of supplementary cementitious materials (SCMs) and additives on the properties of alkali-activated binders, finding the optimal mix composition. Addition of PVA fibers can help mitigate shrinkage/expansion strains without significantly impacting compressive strength.

JOURNAL OF COMPOSITES SCIENCE (2021)

Article Green & Sustainable Science & Technology

Effect of silica fume on efflorescence formation and alkali leaching of alkali-activated slag

Apriany Saludung et al.

Summary: The study found that silica fume reduces the mobility of alkali in alkali-activated slag, leading to a decrease in efflorescence formation. However, almost all sodium can be leached out from the samples after immersion in water for 28 days, indicating the weak bond of sodium in the gel.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Construction & Building Technology

Mechanical and Fresh Properties of Multi-Binder Geopolymer Mortars Incorporating Recycled Rubber Particles

Ahmed Abdelmonim et al.

Summary: This study evaluated the performance of traditional geopolymer mixes (GCM) and rubberised geopolymer mixes (RuGM), identified the best performing GCM, and developed a reliable compressive strength prediction model for RuGM through multi-criteria assessment.

INFRASTRUCTURES (2021)

Article Construction & Building Technology

Development of high strength one-part geopolymer mortar using sodium metasilicate

Minhao Dong et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Characterization and properties of geopolymer nanocomposites with different contents of nano-CaCO3

Hasan Assaedi et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Influence of supplementary cementitious materials on rheological properties of 3D printed fly ash based geopolymer

Xiaolu Guo et al.

CEMENT & CONCRETE COMPOSITES (2020)

Article Green & Sustainable Science & Technology

Effective use of ground waste expanded perlite as green supplementary cementitious material in eco-friendly alkali activated slag composites

Wu-Jian Long et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Green & Sustainable Science & Technology

Properties and characterization of green one-part geopolymer activated by composite activators

Cong Ma et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Construction & Building Technology

Effects of calcined dolomite addition on reaction kinetics of one-part sodium carbonate-activated slag cements

Tao Yang et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Green & Sustainable Science & Technology

Fresh and hardened properties of one-part fly ash-based geopolymer binders cured at room temperature: Effect of slag and alkali activators

Sajjad Yousefi Oderji et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Engineering, Multidisciplinary

Understanding the roles of activators towards setting and hardening control of alkali-activated slag cement

Ning Li et al.

COMPOSITES PART B-ENGINEERING (2019)

Article Construction & Building Technology

Optimization and characterization of cast in-situ alkali-activated pastes by response surface methodology

Bashar S. Mohammed et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Influence of superplasticizers and retarders on the workability and strength of one-part alkali-activated fly ash/slag binders cured at room temperature

Sajjad Yousefi Oderji et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Review Construction & Building Technology

One-part alkali-activated materials: A review

Tero Luukkonen et al.

CEMENT AND CONCRETE RESEARCH (2018)

Article Green & Sustainable Science & Technology

Preparation of cleaner one-part geopolymer by investigating different types of commercial sodium metasilicate in China

Cong Ma et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Environmental Sciences

Characterisation of One-Part Geopolymer Binders Made from Fly Ash

Ailar Hajimohammadi et al.

WASTE AND BIOMASS VALORIZATION (2017)

Article Construction & Building Technology

Composition design and performance of alkali-activated cements

Ning Li et al.

MATERIALS AND STRUCTURES (2017)

Article Engineering, Chemical

Preparation of drying powder inorganic polymer cement based on alkali-activated slag technology

Kai-tuo Wang et al.

POWDER TECHNOLOGY (2017)

Article Construction & Building Technology

Time-dependent characterization of Na2CO3 activated slag

B. Yuan et al.

CEMENT & CONCRETE COMPOSITES (2017)

Article Construction & Building Technology

Synthesis and strength optimization of one-part geopolymer based on red mud

Nan Ye et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Factors influencing the compressive strength of fly ash based geopolymers

Marios Soutsos et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Green & Sustainable Science & Technology

Development of greener alkali-activated cement: utilisation of sodium carbonate for activating slag and fly ash mixtures

Ahmed F. Abdalqader et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Article Construction & Building Technology

Low clinker cement as a sustainable construction material

L. Black

SUSTAINABILITY OF CONSTRUCTION MATERIALS, 2ND EDITION (2016)

Article Construction & Building Technology

Chemical acceleration of a neutral granulated blast-furnace slag activated by sodium carbonate

Maxim Kovtun et al.

CEMENT AND CONCRETE RESEARCH (2015)

Article Materials Science, Ceramics

Synthesis of heat and ambient cured one-part geopolymer mixes with different grades of sodium silicate

Behzad Nematollahi et al.

CERAMICS INTERNATIONAL (2015)

Article Construction & Building Technology

Characterisation of reactive magnesia and sodium carbonate-activated fly ash/slag paste blends

Ahmed F. Abdalqader et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Designing more sustainable and greener self-compacting concrete

Guangcheng Long et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Role of carbonates in the chemical evolution of sodium carbonate-activated slag binders

Susan A. Bernal et al.

MATERIALS AND STRUCTURES (2015)

Article Multidisciplinary Sciences

Effect of Sodium Silicate to Sodium Hydroxide Ratios on Strength and Microstructure of Fly Ash Geopolymer Binder

M. S. Morsy et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2014)

Article Construction & Building Technology

Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash

Idawati Ismail et al.

CEMENT & CONCRETE COMPOSITES (2014)

Article Construction & Building Technology

Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition

Pradip Nath et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Hydration kinetics in hybrid binders: Early reaction stages

I. Garcia-Lodeiro et al.

CEMENT & CONCRETE COMPOSITES (2013)

Review Construction & Building Technology

Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O-CaO-Al2O3-SiO2-H2O

I. Garcia-Lodeiro et al.

CEMENT AND CONCRETE RESEARCH (2011)

Article Construction & Building Technology

Workability Loss and Compressive Strength Development of Cementless Mortars Activated by Combination of Sodium Silicate and Sodium Hydroxide

Keun-Hyeok Yang et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2009)

Article Construction & Building Technology

Properties of cementless mortars activated by sodium silicate

Keun-Hyeok Yang et al.

CONSTRUCTION AND BUILDING MATERIALS (2008)

Review Construction & Building Technology

Alkali-activated binders: A review - Part 1. Historical background, terminology, reaction mechanisms and hydration products

Fernando Pacheco-Torgal et al.

CONSTRUCTION AND BUILDING MATERIALS (2008)

Article Chemistry, Physical

Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymers

Dimitrios Panias et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2007)

Article Construction & Building Technology

An XRD study of the effect of the SiO2/Na2O ratio on the alkali activation of fly ash

M. Criado et al.

CEMENT AND CONCRETE RESEARCH (2007)

Article Construction & Building Technology

Preliminary study on combined-alkali-slag paste materials

YD Li et al.

CEMENT AND CONCRETE RESEARCH (2000)