4.7 Article

Process design and multi-objective optimization of efficient heat utilization distillation based on the influence of pressure and entrainer flow on separation performance

Related references

Note: Only part of the references are listed.
Article Engineering, Chemical

Synthesis of heat-integrated pressure-swing azeotropic distillation using a graphical pinch analysis

Heecheon Lee et al.

Summary: A new graphical method based on pinch analysis is demonstrated for the design of pressure-swing distillation (PSD) and heat integration, showing the feasibility through visualization of feed data and temperature contours. The study reveals that different pinch pressures can be achieved in HIPSD system depending on column sequence or pure components separation order, and energy-efficient HIPSD can be achieved by considering pinch constraints.

AICHE JOURNAL (2022)

Article Thermodynamics

Vapor-Liquid Equilibrium Experiment for Butanone and Ethyl Acetate at 101.3 kPa

Yanqi Wang et al.

Summary: This study investigated the application of two ionic liquids and ethylene glycol in separating butanone and ethyl acetate, showing that the ionic liquids exhibited better separation ability. The NRTL model was found to accurately describe the influence of these entrainers on the phase equilibrium behavior, with a low average relative deviation of 0.033.

JOURNAL OF CHEMICAL AND ENGINEERING DATA (2022)

Article Engineering, Environmental

Design and control of side-stream extractive distillation to separate acetic acid and from wastewater

Jiyan Liu et al.

Summary: This paper analyzes the feasibility of recycling acetic acid and cyclohexanone from wastewater and proposes a method to prevent remixing effect in extractive distillation. The results show that the single liquid side-stream extractive distillation configuration is the optimal choice and the model predictive control structure performs the best in control effectiveness.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Article Engineering, Environmental

Efficient recovery of benzene and n-propanol from wastewater via vapor recompression assisted extractive distillation based on techno-economic and environmental analysis

Zhaoyuan Ma et al.

Summary: The combination of vapor recompression technology and extractive distillation technology in treating wastewater containing benzene/n-propanol can improve energy efficiency, reduce gas emissions, and enhance economic performance, demonstrating its advantages in environmental protection and energy saving.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Article Engineering, Chemical

Extractive Dividing-Wall Column Distillation with a Novel Control Structure Integrating Pressure Swing and Pressure Compensation

Cong Jing et al.

Summary: The energy-efficient E-DWC-HI process is proposed for separating DCM-MeOH mixture, and it is found that variable vapor split by adjusting pressures on both sides of the dividing wall can stabilize product purities.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Article Energy & Fuels

Surrogate modeling-based multi-objective optimization for the integrated distillation processes

Jiawei Lu et al.

Summary: The study proposed an approach that incorporates surrogate modeling into multi-objective optimization, using RBF neural networks to construct surrogate models, adopting central composite design as a sampling strategy, and constructing surrogate models individually for different optimization objectives to improve prediction accuracy. The multi-objective bat algorithm was used to obtain the Pareto front in the design of dividing wall column and side-reactor column configuration, successfully achieving design options that balance capital and operating costs.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

Article Engineering, Chemical

Extractive distillation using ionic liquids-based mixed solvents combined with dividing wall column

Guoxuan Li et al.

Summary: The study focuses on process intensification by combining ionic liquids-based mixed entrainers and DWC technology, showing high energy efficiency, low economy cost and a promising industrial application prospect.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Computer Science, Interdisciplinary Applications

Stakeholder-oriented multi-objective process optimization based on an improved genetic algorithm

Yang Su et al.

COMPUTERS & CHEMICAL ENGINEERING (2020)

Article Engineering, Chemical

Design and control of vapor recompression assisted extractive distillation for separating n-hexane and ethyl acetate

Zemin Feng et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Review Engineering, Chemical

Review of extractive distillation. Process design, operation, optimization and control

Vincent Gerbaud et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2019)

Article Engineering, Chemical

Control of an energy-saving side-stream extractive distillation process with different disturbance conditions

Kang Ma et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Article Engineering, Chemical

Improving the performance of heterogeneous azeotropic distillation via self-heat recuperation technology

Jingxing Chen et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2019)

Article Engineering, Chemical

Control of a Ternary Extractive Distillation Process with Recycle Splitting Using a Mixed Entrainer

Xia Zhang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

Article Energy & Fuels

Design and control of a pressure-swing distillation process with vapor recompression

William L. Luyben

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2018)

Article Engineering, Chemical

Feasibility Evaluation of a Novel Middle Vapor Recompression Distillation Column

Haifeng Cong et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

Article Green & Sustainable Science & Technology

Distillation contra pervaporation: Comprehensive investigation of isobutanol-water separation

Anita Andre et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Energy & Fuels

A combination of pressure-swing and extractive distillation for separating complex binary azeotropic system

Xiaoxin Gao et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2017)

Article Engineering, Chemical

Investigation of Separation Efficiency Indicator for the Optimization of the Acetone-Methanol Extractive Distillation with Water

Xinqiang You et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)

Article Computer Science, Interdisciplinary Applications

Multi-criteria optimization in chemical process design and decision support by navigation on Pareto sets

M. Bortz et al.

COMPUTERS & CHEMICAL ENGINEERING (2014)

Article Engineering, Electrical & Electronic

Optimal Design of Powder-Aligning and Magnetizing Fixtures for an Anisotropic-Bonded NdFeB Permanent Magnet

Dianhai Zhang et al.

IEEE TRANSACTIONS ON MAGNETICS (2014)

Article Computer Science, Interdisciplinary Applications

Comparison of extractive distillation and pressure-swing distillation for acetone/chloroform separation

William L. Luyben

COMPUTERS & CHEMICAL ENGINEERING (2013)

Article Engineering, Chemical

Economic Optimum Design of the Heterogeneous Azeotropic Dehydration of Ethanol

William L. Luyben

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)