☆ 4.7 Article

Solubility and dissolution kinetics of sulfur and sulfides in electrolyte solvents for lithium-sulfur and sodium-sulfur batteries

JOURNAL OF CHEMICAL PHYSICS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

Sulfur infiltration and allotrope formation in porous cathode hosts for lithium-sulfur batteries

Sean Grabe et al.

Summary: The study investigates sulfur infiltration and formation of lower order allotropes in heated porous hosts during fabrication of lithium-sulfur (Li-S) battery cathodes. A novel continuum-level model is presented, incorporating heat transfer and sulfur infiltration, while considering the pore size distribution. Simulations confirm the existence of linear S-6 and S-4 in ultramicropores.

AICHE JOURNAL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Synergistic Manipulation of Na+ Flux and Surface-Preferred Effect Enabling High-Areal-Capacity and Dendrite-Free Sodium Metal Battery

Qianzheng Jin et al.

Summary: A novel metallic sodium/sodium-tin alloy foil anode (Na/NaSn) with 3D interpenetrated network and porous structure is prepared, which allows for uniform sodium deposition at high areal capacity and exhibits excellent electrochemical performance.

ADVANCED SCIENCE (2022)

Add to Collection

Article Energy & Fuels

Kinetics of sulphur dissolution in lithium-sulphur batteries

Matthew Dent et al.

Summary: This study investigates the dissolution kinetics of solid sulphur in DOL:DME solution and presents a novel model for sulphur dissolution and electrolyte impregnation. The results show that solid sulphur has fast dissolution kinetics at 20°C but low solubility, which limits its dissolution. In addition, swelling of the solid sulphur region was observed and the diffusion coefficient of the DOL:DME solution in the solid sulphur was determined.

JOURNAL OF PHYSICS-ENERGY (2022)

Add to Collection

Article Energy & Fuels

Exploring Different Binders for a LiFePO4 Battery, Battery Testing, Modeling and Simulations

Joseph Paul Baboo et al.

Summary: This paper focuses on the LiFePO4 (LFP) battery and investigates the use of new binders to optimize cathode manufacturing. Experimental and simulation results provide insights into the diffusion coefficients of LFP electrodes and the prediction of battery lifetime.

ENERGIES (2022)

Add to Collection

Article Materials Science, Composites

Measurement of the Heat Transfer Properties of Carbon Fabrics via Infrared Thermal Mapping

Phillip Kearney et al.

Summary: This paper aims to determine the heat transfer properties of biaxial carbon fabrics with different architectures. The specific heat capacity was determined using differential scanning calorimetry, while a novel method of numerical analysis using a thermal camera was investigated for measuring thermal diffusivity and conductivity. The results showed that the thermal conductivity parallel to the fibers of a non-crimp stitch bonded fabric matched well with the theoretical value, while voids in woven fabrics led to reduced transverse thermal conductivity.

JOURNAL OF COMPOSITES SCIENCE (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Review and prospects for room-temperature sodium-sulfur batteries

Peng Chen et al.

Summary: This review focuses on recent research results of room-temperature sodium-sulfur (RT-Na/S) batteries, specifically discussing advancements in cathode material improvement, electrolyte optimization, separator modification, and anode protection. Possible solutions and innovations are proposed in hopes of inspiring new ideas for RT-Na/S battery research.

MATERIALS RESEARCH LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Molecular modeling of electrolyte and polysulfide ions for lithium-sulfur batteries

Shumaila Babar et al.

Summary: Key challenges in developing Li-S battery technology include the diffusion of Li+ in sulfur-filled micropores and minimizing the shuttling of polysulfides. Ion dimensions in different forms play a crucial role in determining the transport rate.

IONICS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Life Cycle Assessment of an NMC Battery for Application to Electric Light-Duty Commercial Vehicles and Comparison with a Sodium-Nickel-Chloride Battery

Antonella Accardo et al.

Summary: The study found that the NMC111 battery has the highest environmental impacts during the production stage, with active cathode material, Aluminium, Copper, and energy use for battery production being the main contributors. However, during vehicle operation, the NMC111-BEV showed lower environmental impacts compared to the ZEBRA-BEV. Electric powertrains outperform diesel ones in terms of global warming, abiotic depletion potential-fossil fuels, photochemical oxidation, and ozone layer depletion, but diesel vehicles perform better in most other impact categories.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Chemistry, Physical

Shuttle-effect-free sodium-sulfur batteries derived from a Troger's base polymer of intrinsic microporosity

Jun Woo Jeon et al.

Summary: In this study, carbon-sulfur composites based on intrinsically microporous Tro·ger's base polymer (PIM-EA-TB) were prepared for shuttle-effect-free room-temperature sodium-sulfur batteries, exhibiting excellent electrochemical performance with negligible capacity fading over 350 cycles and a high coulombic efficiency of greater than 99%.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

Opportunities and Challenges of Lithium Ion Batteries in Automotive Applications

Alvaro Masias et al.

Summary: Lithium ion batteries (LIBs) have evolved from consumer electronics to powering the automotive sector, meeting the unique requirements of vehicle applications. Automotive-driven battery targets are determined by international research groups and existing electric vehicle performance. Challenges and opportunities in transitioning LIBs from CE to automotive sector are assessed in terms of energy, life, cost, safety, and fast charge capability.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Designing a Graphene Coating-Based Supercapacitor with Lithium Ion Electrolyte: An Experimental and Computational Study via Multiscale Modeling

Joseph Paul Baboo et al.

Summary: The study investigates the use of graphene electrodes in electrochemical double layer capacitors with lithium ion electrolyte, focusing on the effect of electrode pore size distribution on solvated and desolvated electrolyte ions. Experimental and computational results show that the xGNP-750 coating electrodes exhibit a higher specific capacitance in a specific electrolyte compared to high SSA a-MWGO coating electrodes.

NANOMATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Metal-N4@Graphene as Multifunctional Anchoring Materials for Na-S Batteries: First-Principles Study

Kaishuai Yang et al.

Summary: The study identified Fe-N-4@graphene as a promising anchoring material for adsorbing NaPSs and improving the efficiency of Na-S batteries. The doping of transition metal iron significantly enhances electronic conductivity and adsorption strength, while reducing decomposition energies, thereby promoting battery performance. This research provides insights into the anchoring mechanism and electrocatalytic effects, which could benefit the development of high-performance Na-S batteries.

NANOMATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

An overview of the characteristics of advanced binders for high-performance Li-S batteries

Jun Zhang et al.

Summary: The lithium-sulfur battery (Li-S) shows promise as an energy storage system with high theoretical capacity and eco-friendliness. Binders play a crucial role in the performance of the battery, and developing functional binders is key to improving capacity and efficiency. Future challenges in developing promising binders and solutions are discussed in the conclusion.

NANO MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Composites

Modeling and Simulations of the Sulfur Infiltration in Activated Carbon Fabrics during Composite Cathode Fabrication for Lithium-Sulfur Batteries

Kyriakos Lasetta et al.

Summary: This study presents a model for the sulfur infiltration during the manufacture of composite cathodes for lithium-sulfur batteries, predicting a composite cathode with 41 wt% sulfur in agreement with experimental results. The pore size distribution of the porous carbon host is critical for the retention of sulfur, with pores below 0.4 nm unable to accommodate sulfur and different allotropes retained in pores of varying sizes.

JOURNAL OF COMPOSITES SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Design of Porous Carbons for Supercapacitor Applications for Different Organic Solvent-Electrolytes

Joshua Bates et al.

Summary: This study investigates the optimization of pore size distribution of porous electrodes for different electrolytes through a volume-averaged continuum model of ion transport. The research concludes that a large specific area in terms of micropores larger than the largest desolvated ion is essential for achieving high specific capacity, along with a good proportion of mesopores for fast ion transport and accessibility of the micropores.

C-JOURNAL OF CARBON RESEARCH (2021)

Add to Collection

Article Energy & Fuels

2021 roadmap on lithium sulfur batteries

James B. Robinson et al.

Summary: Lithium sulfur (Li-S) chemistry is a commercially mature technology with significant improvements in energy density and reduced costs, but challenges remain in improving rate performance and longevity. The UK's Faraday Institution has launched the LiSTAR program to address these issues and support the broader Li-S research community, providing guidance for academia, industry, government, and funding agencies.

JOURNAL OF PHYSICS-ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Supercapacitors with lithium-ion electrolyte: An experimental study and design of the activated carbon electrodes via modelling and simulations

Foivos Markoulidis et al.

CARBON (2020)

Add to Collection

Article Chemistry, Physical

The role of synthesis pathway on the microstructural characteristics of sulfur-carbon composites: X-ray imaging and electrochemistry in lithium battery

Daniele Di Lecce et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

How Comparable Are Sodium-Ion Batteries to Lithium-Ion Counterparts?

K. M. Abraham

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

12 years roadmap of the sulfur cathode for lithium sulfur batteries (2009-2020)

Tiefeng Liu et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Review Energy & Fuels

Applications of Lithium-Ion Batteries in Grid-Scale Energy Storage Systems

Tianmei Chen et al.

TRANSACTIONS OF TIANJIN UNIVERSITY (2020)

Add to Collection

Article Biotechnology & Applied Microbiology

Modeling, simulations, and optimization of smooth muscle cell tissue engineering for the production of vascular grafts

Yahya Elsayed et al.

BIOTECHNOLOGY AND BIOENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

Thermodynamic and Mechanical Stability of Crystalline Phases of Li2S2

Qing Guo et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Add to Collection

Article Robotics

Dynamic Modeling of Fiber-Reinforced Soft Manipulator: A Visco-Hyperelastic Material-Based Continuum Mechanics Approach

Seri Mastura Mustaza et al.

SOFT ROBOTICS (2019)

Add to Collection

Article Chemistry, Physical

Sulphur-linked graphitic and graphene oxide platelet-based electrodes for electrochemical double layer capacitors

Richard Reece et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Multidisciplinary Sciences

Structure and dynamics in the lithium solvation shell of nonaqueous electrolytes

Sungho Han

SCIENTIFIC REPORTS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Methods for process-related resin selection and optimisation in high-pressure resin transfer moulding

Mathew Rutt et al.

MATERIALS SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Highly Solvating Electrolytes for Lithium-Sulfur Batteries

Abhay Gupta et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Cation-Dependent Electrochemistry of Polysulfides in Lithium and Magnesium Electrolyte Solutions

Georg Bieker et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Add to Collection

Article Multidisciplinary Sciences

A room-temperature sodium-sulfur battery with high capacity and stable cycling performance

Xiaofu Xu et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Insight into Sulfur Confined in Ultramicroporous Carbon

M. Helen et al.

ACS OMEGA (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Greatly Suppressed Shuttle Effect for Improved Lithium Sulfur Battery Performance through Short Chain Intermediates

Na Xu et al.

NANO LETTERS (2017)

Add to Collection

Article Chemistry, Physical

The Significance of Elemental Sulfur Dissolution in Liquid Electrolyte Lithium Sulfur Batteries

Peter Paul R. M. L. Harks et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Graphene-based materials via benzidine-assisted exfoliation and reduction of graphite oxide and their electrochemical properties

E. C. Vermisoglou et al.

APPLIED SURFACE SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Transient existence of crystalline lithium disulfide Li2S2 in a lithium-sulfur battery

Andrea Paolella et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection

Article Electrochemistry

Sodium Polysulfides during Charge/Discharge of the Room-Temperature Na/S Battery Using TEGDME Electrolyte

Icpyo Kim et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Add to Collection

Article Multidisciplinary Sciences

A stable room-temperature sodium-sulfur battery

Shuya Wei et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Engineering, Mechanical

Poromechanical effect in the lithium-sulfur battery cathode

Pallab Barai et al.

EXTREME MECHANICS LETTERS (2016)

Add to Collection

Article Chemistry, Physical

Non-activated high surface area expanded graphite oxide for supercapacitors

E. C. Vermisoglou et al.

APPLIED SURFACE SCIENCE (2015)

Add to Collection

Article Electrochemistry

Modeling of nano-structured cathodes for improved lithium-sulfur batteries

Timo Danner et al.

ELECTROCHIMICA ACTA (2015)

Add to Collection

Article Electrochemistry

A Study of the Influence of Lithium Salt Anions on Oxygen Reduction Reactions in Li-Air Batteries

Iromie Gunasekara et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection

Article Electrochemistry

Quantitative Chromatographic Determination of Dissolved Elemental Sulfur in the Non-Aqueous Electrolyte for Lithium-Sulfur Batteries

Dong Zheng et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection

Article Engineering, Chemical

MODELLING OF A SOLID DISSOLUTION IN LIQUID WITH CHEMICAL REACTION: APPLICATION TO THE ATTACK REACTION OF PHOSPHATE BY SULPHURIC ACID

Nader Frikha et al.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2014)

Add to Collection

Article Chemistry, Physical

Probing the Lithium-Sulfur Redox Reactions: A Rotating-Ring Disk Electrode Study

Yi-Chun Lu et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2014)

Add to Collection

Article Chemistry, Physical

Mechanistic modeling of polysulfide shuttle and capacity loss in lithium-sulfur batteries

Andreas F. Hofmann et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Materials Science, Characterization & Testing

Monitoring and modelling of oxygen transport through un-crosslinked and crosslinked gelatine gels

Y. Elsayed et al.

POLYMER TESTING (2014)

Add to Collection

Article Chemistry, Physical

Effects of Liquid Electrolytes on the Charge-Discharge Performance of Rechargeable Lithium/Sulfur Batteries: Electrochemical and in-Situ X-ray Absorption Spectroscopic Studies

Jie Gao et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Electrophoresis and orientation of multiple wall carbon nanotubes in polymer solution

A. K. Murugesh et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2010)

Add to Collection

Article Materials Science, Multidisciplinary

A Theoretical and Experimental Study on Solubility of Curatives in Rubbers

Rui Guo et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2009)

Add to Collection

Article Electrochemistry

A mathematical model for a lithium-sulfur cell

Karthikeyan Kumaresan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2008)

Add to Collection

Letter Materials Science, Multidisciplinary

Elastic properties of polycrystalline elemental sulphur

E Scafè et al.

JOURNAL OF MATERIALS SCIENCE (2005)

Add to Collection

Article Electrochemistry

Polysulfide shuttle study in the Li/S battery system

YV Mikhaylik et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)

Add to Collection

Article Engineering, Chemical

Flow through a two-scale porosity, oriented fibre porous medium

S Amico et al.

TRANSPORT IN POROUS MEDIA (2004)

Add to Collection

Article Polymer Science

Prediction of polymer thermal diffusion coefficients from polymer-solvent interaction parameters: Comparison with thermal field flow Fractionation and thermal diffusion forced Rayleigh scattering experiments

EPC Mes et al.

INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.