Related references
Note: Only part of the references are listed.Physical and mechanical properties of flamboyant (Delonix Regia) pod filled polyester composites
E. O. Achukwu et al.
HELIYON (2022)
INFLUENCE OF IPNS (VINYLESTER / EPOXY / POLYURETHANE) ON THE MECHANICAL PROPERTIES OF GLASS / CARBON HYBRID COMPOSITES
Karjala Santhosh Priya et al.
IIUM ENGINEERING JOURNAL (2022)
Long term accelerated influence on thermo-mechanical properties of glass/carbon fiber reinforced interpenetrating polymer network hybrid composites
Karjala Santhosh Priya et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2022)
Interfacial modification between glass fiber and polypropylene using a novel waterborne amphiphilic sizing agent
Wei Liu et al.
COMPOSITES PART B-ENGINEERING (2022)
Characterization of recycled and virgin polyethylene terephthalate composites reinforced with modified kenaf fibers for automotive application
Macaulay M. Owen et al.
POLYMER COMPOSITES (2022)
Experimental Analysis and Mechanical Properties of Fly-ash Loaded E-Glass Fiber Reinforced IPN (Vinylester/polyurethane) Composite
R. Ganesamoorthy et al.
FIBERS AND POLYMERS (2022)
Effect of epoxy concentrations on thermo-mechanical properties of kenaf fiber - recycled poly (ethylene terephthalate) composites
Macaulay M. Owen et al.
JOURNAL OF INDUSTRIAL TEXTILES (2022)
Effect of varying processing temperatures on the mechanical and microstructural properties of kenaf fibre-ABS composites for moderate temperature applications
M. M Owen et al.
Polymers from Renewable Resources (2022)
Sustainable Additive Manufacturing: Mechanical Response of Polypropylene over Multiple Recycling Processes
Nectarios Vidakis et al.
SUSTAINABILITY (2021)
Incorporation of Recycled Polypropylene and Fly Ash in Polypropylene-Based Composites for Automotive Applications
Mojtaba Ajorloo et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2021)
Comparative study of fiber reinforced PP composites: Effect of fiber type, coupling and failure mechanisms
R. Vardai et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Degradation Behavior of Polypropylene during Reprocessing and Its Biocomposites: Thermal and Oxidative Degradation Kinetics
Elnaz Esmizadeh et al.
POLYMERS (2020)
The Effects of Reprocessing and Fiber Treatments on the Properties of Polypropylene-Sugarcane Bagasse Biocomposites
Juan P. Correa-Aguirre et al.
POLYMERS (2020)
Polymer-Based Composites: An Indispensable Material for Present and Future Applications
Isiaka Oluwole Oladele et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2020)
Thermo-mechanical degradation of polypropylene (PP) and low-density polyethylene (LDPE) blends exposed to simulated recycling
Sainiwetha Saikrishnan et al.
POLYMER DEGRADATION AND STABILITY (2020)
The influence of mechanical recycling on the properties of thermotropic liquid crystalline polymer and long glass fiber reinforced polypropylene
Tianran Chen et al.
COMPOSITES PART B-ENGINEERING (2020)
Ultra-stable aqueous foams induced by interfacial co-assembly of highly hydrophobic particles and hydrophilic polymer
Yifeng Sheng et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)
Environmentally-friendly technology for rapid on-line recycling of acrylonitrile-butadiene-styrene, polystyrene and polypropylene using near-infrared spectroscopy
Jia Li et al.
JOURNAL OF CLEANER PRODUCTION (2019)
The Influence of Mechanical Recycling on Properties in Injection Molding of Fiber-Reinforced Polypropylene
T. Evens et al.
INTERNATIONAL POLYMER PROCESSING (2019)
Effect of Recycling Cycles on the Mechanical and Damping Properties of Short Alfa Fibre Reinforced Polypropylene Composite
Fatima Ezzahra El Abbassi et al.
JOURNAL OF RENEWABLE MATERIALS (2019)
Interference of Biodegradable Plastics in the Polypropylene Recycling Process
Maria Dolores Samper et al.
MATERIALS (2018)
Evaluating the performance of gamma irradiated okra fiber reinforced polypropylene (PP) composites: comparative study with jute/PP
A. N. M. Masudur Rahman et al.
FASHION AND TEXTILES (2018)
Effect of recycling on polypropylene composites reinforced with glass fibres
Giovanna Colucci et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2017)
Influence of PA11 and PP thermoplastic polymers on recycling stability of unidirectional flax fibre reinforced biocomposites
Clement Gourier et al.
POLYMER DEGRADATION AND STABILITY (2017)
From waste plastics to industrial raw materials: A life cycle assessment of mechanical plastic recycling practice based on a real-world case study
Fu Gu et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2017)
Long chain branching as an innovative up-cycling process of polypropylene post-consumer waste - Possibilities and limitations
Florian Kamleitner et al.
WASTE MANAGEMENT (2017)
Mechanical and chemical recycling of solid plastic waste
Kim Ragaert et al.
WASTE MANAGEMENT (2017)
Number of processing cycle effect on the properties of the composites based on alfa fiber
Dalila Hammiche et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2016)
Effects of Recycling on the Mechanical Behavior of Polypropylene at Room Temperature Through Statistical Analysis Method
Fatemeh Khademi et al.
POLYMER ENGINEERING AND SCIENCE (2016)
Mechanical recycling and composition effects on the properties and structure of hardwood cellulose-reinforced high density polyethylene eco-composites
Carmen Fonseca-Valero et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Flax/polypropylene composites for lightened structures: Multiscale analysis of process and fibre parameters
Awa S. Doumbia et al.
MATERIALS & DESIGN (2015)
Impact response of recycled polypropylene-based composites under a wide range of temperature: Effect of filler content and recycling
K. Wang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Recycling of waste from polymer materials: An overview of the recent works
Kotiba Hamad et al.
POLYMER DEGRADATION AND STABILITY (2013)
Recycling effects on the rheological and thermomechanical properties of polypropylene-based composites
Nadia Bahlouli et al.
MATERIALS & DESIGN (2012)
Analysis of thermomechanical reprocessing effects on polypropylene/ethylene octene copolymer blends
Kui Wang et al.
POLYMER DEGRADATION AND STABILITY (2012)
Structure and Mechanical Properties of a Talc-Filled Polypropylene/Ethylene-Propylene-Diene Composite After Reprocessing in the Melt State
M. Sarrionandia et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Rigidity analysis of polypropylene/vegetal fibre composites after recycling
Alain Bourmaud et al.
POLYMER DEGRADATION AND STABILITY (2009)
Recycling-oriented characterization of small waste electrical and electronic equipment
Perrine Chancerel et al.
WASTE MANAGEMENT (2009)
The influence of fibre length, diameter and concentration on the modulus of glass fibre reinforced polyamide 6,6
J. L. Thomason
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Development of HEMP fiber reinforced polypropylene composites
Hajnalka Hargitai et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2008)
Recycling of polypropylene-based eco-composites
Vineta Srebrenkoska et al.
POLYMER INTERNATIONAL (2008)
The effect of γ-irradiation on the structure and properties of Poly(propylene)/clay nanocomposites
Naima Touati et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2007)
Investigations on the recycling of hemp and sisal fibre reinforced polypropylene composites
A. Bourmaud et al.
POLYMER DEGRADATION AND STABILITY (2007)
Optimising industrial hemp fibre for composites
K. L. Pickering et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Characterization and thermal degradation of polypropylene-montmorillonite nanocomposites
F Bertini et al.
POLYMER DEGRADATION AND STABILITY (2006)
Mechanical properties of short flax fibre bundle/polypropylene composites:: Influence of matrix/fibre modification, fibre content, water uptake and recycling
A Arbelaiz et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Temperature and molecular weight dependence of fracture behaviour of polypropylene films
B Fayolle et al.
POLYMER TESTING (2004)
Degradation of post-consumer polypropylene materials exposed to simulated recycling -: mechanical properties
A Jansson et al.
POLYMER DEGRADATION AND STABILITY (2003)
Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites
SY Fu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)