Journal
JOURNAL OF APPLIED POLYMER SCIENCE
Volume 140, Issue 5, Pages -Publisher
WILEY
DOI: 10.1002/app.53421
Keywords
flax fibers; hybrid composite; kenaf fibers; mechanical properties; structure-property relations
Categories
Ask authors/readers for more resources
This research investigates the physical and mechanical properties of hybrid composites made of epoxy reinforced by kenaf and flax natural fibers. The results showed that the density of the hybrid composites remained unchanged, and increasing the kenaf fiber volume fraction improved the tensile, flexural, and interlaminar shear performance. The stacking sequence significantly affected the mechanical properties of the hybrid composites.
This research investigates the physical and mechanical properties of hybrid composites made of epoxy reinforced by kenaf and flax natural fibers to investigate the hybridization influences of the composites. Pure and hybrid composites were fabricated using bi-directional kenaf and flax fabrics at different stacking sequences utilizing the vacuum-assisted resin infusion method. The pure and hybrid composites' physical properties, such as density, fiber volume fraction (FVF), water absorption capacity, and dimensional stability, were measured. The tests of tensile, flexural, interlaminar shear and fracture toughness (Mode II) were examined to determine the mechanical properties. The results revealed that density remained unchanged for the hybrid compared to pure kenaf/epoxy composites. The tensile, flexural, and interlaminar shear performance of flax/epoxy composite is improved by an increment of kenaf FVF in hybrid composites. The stacking sequence significantly affected the mechanical properties of hybrid composites. The highest tensile strength (59.8 MPa) was obtained for FK2 (alternative sequence of flax and kenaf fibers). However, FK3 (flax fiber located on the outer surfaces) had the highest interlaminar shear strength (12.5 MPa) and fracture toughness (3302.3 J/m(2)) among all tested hybrid composites. The highest water resistance was achieved for FK5 with the lowest thickness swelling.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available