Related references
Note: Only part of the references are listed.Investigating the effects of various synthesis routes on morphological, optical, photoelectrochemical and photocatalytic properties of single-phase perovskite BiFeO3
Shui-Wen Chang Chien et al.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2022)
Highly electrocatalytic activity Ruddlesden_Popper type electrode materials for solid oxide fuel cells
Tiezhu Ma et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)
High-yield electrochemical upgrading of CO2 into CH4 using large-area protonic ceramic electrolysis cells
Zehua Pan et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2022)
Mn-doped Ruddlesden-Popper oxide La1.5Sr0.5NiO4+δ as a novel air electrode material for solid oxide electrolysis cells
Yifeng Zheng et al.
CERAMICS INTERNATIONAL (2021)
Cobalt substituted Pr2Ni1-xCoxO4+δ (x=0, 0.1, 0.2) oxygen electrodes: Impact on electrochemical performance and durability of solid oxide electrolysis cells
V. Vibhu et al.
JOURNAL OF POWER SOURCES (2021)
Long-Term Stability of Pr2NiO4+δ Air Electrodes for Solid Oxide Cells against Chromium Poisoning
Nina Schrodl et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)
High catalytic activity of Fe-based perovskite fuel electrode for direct CO2 electroreduction in SOECs
Shun Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
High-temperature electrocatalysis and key materials in solid oxide electrolysis cells
Lingting Ye et al.
JOURNAL OF ENERGY CHEMISTRY (2021)
Multiple perovskite layered lanthanum nickelate Ruddlesden-Popper systems as highly active bifunctional oxygen catalysts
Sung Ryul Choi et al.
CHEMICAL ENGINEERING JOURNAL (2021)
Insight into the influence of noble metal decorated on BiFeO3 for 2,4-dichlorophenol and real herbicide wastewater treatment under visible light
Sze-Mun Lam et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)
Comparative investigation on the functional properties of alkaline earth metal (Ca, Ba, Sr) doped Nd2NiO4+δ oxygen electrode material for SOFC applications
R. K. Lenka et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Evaluation of bismuth doped La2-xBixNiO4+δ (x=0, 0.02 and 0.04) as cathode materials for solid oxide fuel cells
Chuangang Yao et al.
CERAMICS INTERNATIONAL (2021)
Barium-doped Pr2Ni0.6Cu0.4O4+δ with triple conducting characteristics as cathode for intermediate temperature proton conducting solid oxide fuel cell
Chengyi Ai et al.
CHINESE JOURNAL OF CHEMICAL ENGINEERING (2021)
Air electrodes and related degradation mechanisms in solid oxide electrolysis and reversible solid oxide cells
M. S. Khan et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)
Ruddlesden-Popper-Structured (Pr0.9La0.1)2 (Ni0.8Cu0.2)O4+δ: An Effective Oxygen Electrode Material for Proton-Conducting Solid Oxide Electrolysis Cells
Wenjie Wang et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)
Assessment of Nd1.5Pr0.5Ni1-xMxO4+δ (M = Cu, Co, Mo; x=0, 0.05 and 0.1) as cathode materials for intermediate-temperature solid oxide fuel cell
Ting Zhang et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)
Efficient symmetrical electrodes of PrBaFe2-xCoxO5+δ (x=0, 0.2,0.4) for solid oxide fuel cells and solid oxide electrolysis cells
Chunling Lu et al.
ELECTROCHIMICA ACTA (2020)
Barium-doped nickelates Nd2-xBaxNiO4+δ as promising electrode materials for protonic ceramic electrochemical cells
Artem P. Tarutin et al.
CERAMICS INTERNATIONAL (2020)
Highly active and durable La0.4Sr0.6MnO3-δ and Ce0.8Gd0.2O1.9 nanocomposite electrode for high-temperature reversible solid oxide electrochemical cells
Hiroyuki Shimada et al.
CERAMICS INTERNATIONAL (2020)
Electrochemical ageing study of mixed lanthanum/praseodymium nickelates La2-xPrxNiO4+δ as oxygen electrodes for solid oxide fuel or electrolysis cells
Vaibhav Vibhu et al.
JOURNAL OF ENERGY CHEMISTRY (2020)
Tailoring La2-xAxNi1-yByO4+δ cathode performance by simultaneous A and B doping for IT-SOFC
L. Navarrete et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Microstructural investigation of BSCF-based cathode material for enhanced oxygen reduction reaction performance and electrode stability
Anisah Shafiqah Habiballah et al.
CERAMICS INTERNATIONAL (2020)
Recent advances in solid oxide cell technology for electrolysis
A. Hauch et al.
SCIENCE (2020)
Ruddlesden-Popper perovskites in electrocatalysis
Xiaomin Xu et al.
MATERIALS HORIZONS (2020)
Development of lanthanum strontium cobalt ferrite perovskite electrodes of solid oxide fuel cells - A review
San Ping Jiang
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
High-Temperature CO2 Electrolysis in Solid Oxide Electrolysis Cells: Developments, Challenges, and Prospects
Yuefeng Song et al.
ADVANCED MATERIALS (2019)
Pr0.5Ba0.5Co0.7Fe0.25Nb0.05O3-δ as air electrode for solid oxide steam electrolysis cells
Ze-Tian Tao et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Characterization of Ta/W co-doped SrFeO3-δ perovskite as cathode for solid oxide fuel cells
Chuangang Yao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
A niobium and tungsten co-doped SrFeO3-δ perovskite as cathode for intermediate temperature solid oxide fuel cells
Chuangang Yao et al.
CERAMICS INTERNATIONAL (2019)
La2Ni1-xCoxO4+δ (x=0.0, 0.1 and 0.2) based efficient oxygen electrode materials for solid oxide electrolysis cells
V. Vibhu et al.
JOURNAL OF POWER SOURCES (2019)
Structural transformations of the La2-xPrxNiO4+δ system probed by high-resolution synchrotron and neutron powder diffraction
Vaibhav Vibhu et al.
DALTON TRANSACTIONS (2019)
Pd-impregnated Sr1.9VMoO6-δ double perovskite as an efficient and stable anode for solid-oxide fuel cells operating on sulfur-containing syngas
Bingbing Niu et al.
ELECTROCHIMICA ACTA (2018)
Enhancing oxygen reduction reaction of YSZ/La2NiO4+δ using an ultrathin La2NiO4+δ interfacial layer
M. Benamira et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Oxygen transport properties of Ca-doped Pr2NiO4
V. A. Sadykov et al.
SOLID STATE IONICS (2018)
Antimony-doped Bi0.5Sr0.5FeO3- as a novel Fe-based oxygen reduction electrocatalyst for solid oxide fuel cells below 600 degrees C
Lei Gao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
23,000 h steam electrolysis with an electrolyte supported solid oxide cell
Josef Schefold et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
A review of high temperature co-electrolysis of H2O and CO2 to produce sustainable fuels using solid oxide electrolysis cells (SOECs): advanced materials and technology
Yun Zheng et al.
CHEMICAL SOCIETY REVIEWS (2017)
Phosphorus-Doped Perovskite Oxide as Highly Efficient Water Oxidation Electrocatalyst in Alkaline Solution
Yinlong Zhu et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Mechanical behavior of Ce0.9Gd0.1O1.95-La0.6Sr0.4Co0.2Fe0.8O3-δ oxygen electrode with a coral microstructure for solid oxide fuel cell and solid oxide electrolyzer cell
Jaroslaw Sar et al.
CERAMICS INTERNATIONAL (2016)
Exsolved Fe-Ni nano-particles from Sr2Fe1.3Ni0.2Mo0.5O6 perovskite oxide as a cathode for solid oxide steam electrolysis cells
Y. Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Comparison of performance and degradation of large-scale solid oxide electrolysis cells in stack with different composite air electrodes
Yifeng Zheng et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Overstoichiometric oxides Ln2NiO4+δ (Ln = La, Pr or Nd) as oxygen anodic electrodes for solid oxide electrolysis application
Tiphaine Ogier et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Co-electrolysis of steam and CO2 in a solid oxide electrolysis cell with La0.75Sr0.25Cr0.5Mn0.5O3-δ -Cu ceramic composite electrode
Ruimin Xing et al.
JOURNAL OF POWER SOURCES (2015)
Effect of ionic size of dopants on the lattice structure, electrical and electrochemical properties of La2-xMxNiO4+δ (M = Ba, Sr) cathode materials
Yongna Shen et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Investigation on Pr2 - xSrxNiO4 + δ (x=0.3-1.0) cathode materials for intermediate temperature solid oxide fuel cell
S. S. Bhoga et al.
SOLID STATE IONICS (2014)
La1.98NiO4±δ, a new cathode material for solid oxide fuel cell: Impedance spectroscopy study and compatibility with gadolinia-doped ceria and yttria-stabilized zirconia electrolytes
M. Ferkhi et al.
ELECTROCHIMICA ACTA (2012)
Preparation and electrochemical properties of strontium doped Pr2NiO4 cathode materials for intermediate-temperature solid oxide fuel cells
Junfang Yang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Effect of Fe doping on PrBaCo2O5+δ as cathode for intermediate-temperature solid oxide fuel cells
Jing Zou et al.
SOLID STATE IONICS (2012)
La0.75Sr0.25Cr0.5Mn0.5O3 as hydrogen electrode for solid oxide electrolysis cells
Chao Jin et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Performance of solid oxide electrolysis cells based on composite La0.8Sr0.2MnO3-delta - yttria stabilized zirconia and Ba0.5Sr0.5Co0.8Fe0.2O3-delta oxygen electrodes
P. Kim-Lohsoontorn et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
High temperature solid oxide electrolysis cell employing porous structured (La0.75Sr0.25)(0.95)MnO3 with enhanced oxygen electrode performance
Chenghao Yang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
A new anode material for solid oxide electrolyser: The neodymium nickelate Nd2NiO4+δ
F. Chauveau et al.
JOURNAL OF POWER SOURCES (2010)
Highly efficient high temperature electrolysis
Anne Hauch et al.
JOURNAL OF MATERIALS CHEMISTRY (2008)
Oxygen diffusion and transport properties in non-stoichiometric Ln2-xNiO4+δ oxides
E Boehm et al.
SOLID STATE IONICS (2005)