Enhanced mechanical properties and thermal stability in additively manufactured Al-Ni alloy by Sc addition

The trade-off between printability and performance of Al-Ni-Sc alloy fabricated by additive manufacturing (AM) herein is demonstrated. By designing eutectic solidification, a crack-free microstructure was obtained. Extremely high cooling rate during rapid solidification promoted the formation of spherical Al3Ni nano -particles. Further by adding Sc, coherent L12 Al3Sc nano-particles were formed, which served as nucleation sites of alpha-Al to transform columnar grains into equiaxed grains and provided further strengthening. Superior mechanical properties with tensile strength of 445 MPa and yield strength of 320 MPa at ambient temperature were obtained. And this Al-Ni-Sc alloy can still exhibit excellent tensile strength of 259 MPa and yield strength of 248 MPa at 250 celcius. After thermal exposure at 200-400 degrees C, Al-Ni-Sc alloy consistently showed higher microhardness than the corresponding Al-Ni alloy and both alloys retained hardness at 300 degrees C for 50 h. The Al3Sc nano-precipitates provided additional hardness increments and compensated the microhardness decrease owing to the coarsening of Al3Ni nano-particles during high-temperature ex-posure. The coarsening process studied on Al-Ni alloy can be divided into two stages, rapid coarsening stage at first 0.5 h due to solute supersaturation and coarsening slowing stage due to the decreased coarsening drive. Following the classical coarsening mechanism-LSW model and Arrhenius equation, the corre-sponding diffusion activation energy of the second stage was calculated to be 23.03 KJ/mol, much lower than Ni self-diffusion in Al. This phenomenon was attributed to the formation of numerous defects and grain boundaries during AM as fast diffusion channels of atoms. The finding of this work provides guidance for considering discrepancy of Al alloys produced by AM and cast.(c) 2022 Elsevier B.V. All rights reserved.

Automated summary

The trade-off between printability and performance of the Al-Ni-Sc alloy fabricated by additive manufacturing is demonstrated in this study. The use of eutectic solidification and the addition of Sc resulted in a crack-free microstructure and the formation of nano-particles, which enhanced the mechanical properties of the alloy. The Al-Ni-Sc alloy exhibited superior tensile strength and yield strength at both ambient temperature and high temperature, and it retained hardness even after thermal exposure.