Related references
Note: Only part of the references are listed.Multiple deformation mechanisms induced by pre-twinning in CoCrFeNi high entropy alloy
Zhen Zhang et al.
SCRIPTA MATERIALIA (2022)
Achieving maximum strength-ductility combination in fine-grained Cu-Zn alloy via detwinning and twinning deformation mechanisms
Lei Gu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
Strengthening CrFeCoNiMn0.75Cu0.25 high entropy alloy via laser shock peening
Wujing Fu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2022)
An investigation on the corrosion performance of Fe2CoCrNi0.5 based high entropy alloys
Yigit Garip
CORROSION SCIENCE (2022)
Tailoring oxidation resistance of Fe2CoCrNi0.5 based high entropy alloys by addition of alloying elements (Si, Cu and Si-Cu co-added)
Yigit Garip
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
Tailoring oxidation resistance of Fe2CoCrNi0.5 based high entropy alloys by addition of alloying elements (Si, Cu and Si-Cu co-added)
Yigit Garip
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
High temperature and short-term oxidation behavior of CoCrCu1.2FeNi high entropy alloy in solid and semi-solid state
Minjie Huang et al.
CORROSION SCIENCE (2021)
Resistance sintering of CoCrFeNiAlx (x=0.7, 0.85, 1) high entropy alloys: Microstructural characterization, oxidation and corrosion properties
Y. Garip et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Effect of annealing temperatures on microstructure and deformation behavior of Al0.1CrFeCoNi high-entropy alloy
S. W. Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Cryoforged nanotwinned titanium with ultrahigh strength and ductility
Shiteng Zhao et al.
SCIENCE (2021)
Evading strength-corrosion tradeoff in Mg alloys via dense ultrafine twins
Changjian Yan et al.
NATURE COMMUNICATIONS (2021)
Influence of multi-axial compression pre-treatment on the microstructure evolution and mechanical properties of an Al-Cu-Li alloy during aging
Qingqing Zhu et al.
JOURNAL OF MATERIALS SCIENCE (2020)
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
E. P. George et al.
ACTA MATERIALIA (2020)
Synergistic deformation pathways in a TWIP steel at cryogenic temperatures: In situ neutron diffraction
Lei Tang et al.
ACTA MATERIALIA (2020)
Plastic Deformation Behavior of 40Fe-25Ni-15Cr-10Co-10V High-Entropy Alloy for Cryogenic Applications
Min Ji Jang et al.
METALS AND MATERIALS INTERNATIONAL (2019)
Role of BCC phase on tensile behavior of dual-phase Al0.5CoCrFeMnNi high-entropy alloy at cryogenic temperature
Jeong Min Park et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys
Zezhou Li et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0.2 high-entropy alloy at room and cryogenic temperatures
Y. Tong et al.
ACTA MATERIALIA (2019)
Hierarchical microstructure design of a bimodal grained twinning-induced plasticity steel with excellent cryogenic mechanical properties
Yu Li et al.
ACTA MATERIALIA (2018)
Probing deformation mechanisms of a FeCoCrNi high-entropy alloy at 293 and 77 K using in situ neutron diffraction
Yiqiang Wang et al.
ACTA MATERIALIA (2018)
Combined strengthening from nanotwins and nanoprecipitates in an iron-based superalloy
B. B. Zhang et al.
ACTA MATERIALIA (2018)
Twinning-induced plasticity (TWIP) steels
Bruno C. De Cooman et al.
ACTA MATERIALIA (2018)
Cryogenic fracture toughness of 9%Ni steel flux cored arc welds
Weidong Mu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Microband induced plasticity and the temperature dependence of the mechanical properties of a carbon-doped FeNiMnAlCr high entropy alloy
Zhangwei Wang et al.
MATERIALS CHARACTERIZATION (2018)
Effect of low temperature on tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy
Tilak Bhattacharjee et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
Abnormal temperature dependence of impact toughness in AlxCoCrFeNi system high entropy alloys
S. Q. Xia et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
Deformation mechanisms of Al0.1CoCrFeNi high entropy alloy at ambient and cryogenic temperatures
Songqin Xia et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
In-situ neutron diffraction investigation on twinning/detwinning activities during tension-compression load reversal in a twinning induced plasticity steel
Q. Xie et al.
SCRIPTA MATERIALIA (2018)
Fundamental understanding of mechanical behavior of high-entropy alloys at low temperatures: A review
Zongyang Lyu et al.
JOURNAL OF MATERIALS RESEARCH (2018)
The origin of negative stacking fault energies and nano-twin formation in face-centered cubic high entropy alloys
Y. H. Zhang et al.
SCRIPTA MATERIALIA (2017)
A critical review of high entropy alloys and related concepts
D. B. Miracle et al.
ACTA MATERIALIA (2017)
The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy
J. Miao et al.
ACTA MATERIALIA (2017)
Deformation mechanisms of Mo alloyed FeCoCrNi high entropy alloy: In situ neutron diffraction
Biao Cai et al.
ACTA MATERIALIA (2017)
Review: Overcoming the paradox of strength and ductility in ultrafine-grained materials at low temperatures
Praveen Kumar et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy
G. Laplanche et al.
ACTA MATERIALIA (2016)
The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures
DongYue Li et al.
INTERMETALLICS (2016)
Modeling concepts for intermetallic titanium aluminides
F. Appel et al.
PROGRESS IN MATERIALS SCIENCE (2016)
Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels
Seok Su Sohn et al.
ACTA MATERIALIA (2015)
Dislocation density evolution of AA 7020-T6 investigated by in-situ synchrotron diffraction under tensile load
Z. Y. Zhong et al.
MATERIALS CHARACTERIZATION (2015)
Microstructural evolution of Cu-Al alloys subjected to multi-axial compression
Guangyu Liu et al.
MATERIALS CHARACTERIZATION (2015)
Strengthening at nanoscaled coherent twin boundary in f.c.c. metals
Pei Gu et al.
PHILOSOPHICAL MAGAZINE (2014)
Microstructures and properties of high-entropy alloys
Yong Zhang et al.
PROGRESS IN MATERIALS SCIENCE (2014)
A fracture-resistant high-entropy alloy for cryogenic applications
Bernd Gludovatz et al.
SCIENCE (2014)
Plastic anisotropy and associated deformation mechanisms in nanotwinned metals
Zesheng You et al.
ACTA MATERIALIA (2013)
Strain-Induced Ultrahard and Ultrastable Nanolaminated Structure in Nickel
X. C. Liu et al.
SCIENCE (2013)
Mechanism of twinning-induced plasticity in β-type Ti-15Mo alloy
Xiaohua Min et al.
SCRIPTA MATERIALIA (2013)
Deformation twinning in nanocrystalline materials
Y. T. Zhu et al.
PROGRESS IN MATERIALS SCIENCE (2012)
High strength, epitaxial nanotwinned Ag films
D. Bufford et al.
ACTA MATERIALIA (2011)
Dislocation-twin interactions in nanocrystalline fcc metals
Y. T. Zhu et al.
ACTA MATERIALIA (2011)
Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys
Ming-Hao Chuang et al.
ACTA MATERIALIA (2011)
Formation of single and multiple deformation twins in nanocrystalline fcc metals
Y. T. Zhu et al.
ACTA MATERIALIA (2009)
Interactions between non-screw lattice dislocations and coherent twin boundaries in face-centered cubic metals
Z. -H. Jin et al.
ACTA MATERIALIA (2008)
Mechanical properties of nanocrystalline materials
MA Meyers et al.
PROGRESS IN MATERIALS SCIENCE (2006)
High density nano-scale twins in Cu induced by dynamic plastic deformation
WS Zhao et al.
SCRIPTA MATERIALIA (2005)
Paradox of strength and ductility in metals processed by severe plastic deformation
RZ Valiev et al.
JOURNAL OF MATERIALS RESEARCH (2002)
Impact tensile behavior of 9% nickel steel at low temperature
HS Shin et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2000)
Share Paper
