4.7 Article

Upgrading the performance of shell and helically coiled heat exchangers with new flow path by using TiO2/water and CuO-TiO2/water nanofluids

Related references

Note: Only part of the references are listed.
Article Energy & Fuels

Energy and exergy analysis of a hybrid photovoltaic/thermal-air collector modified with nano-enhanced latent heat thermal energy storage unit

Fatih Selimefendigil et al.

Summary: In this study, three different PVT-air collectors were designed and manufactured, and their performances were compared through experiments. The results showed that utilizing a nano-enhanced thermal energy storage system and increasing flow rate significantly improved both the electrical and thermal performances of the PVT system.

JOURNAL OF ENERGY STORAGE (2022)

Article Chemistry, Physical

The sono-photocatalytic performance of a Fe2O3 coated TiO2 based hybrid nanofluid under visible light via RSM

Manjakuppam Malika et al.

Summary: The calcination temperature affects the crystallinity and morphology of Fe2O3- TiO2 nanosheets, and using hybrid nanofluids can improve the photocatalytic degradation.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Article Thermodynamics

A comprehensive survey on utilization of hybrid nanofluid in plate heat exchanger with various number of plates

Faraz Afshari et al.

Summary: The study investigates the effects of using hybrid nanofluid and number of plates on the performance of plate heat exchangers. Results showed using both nanofluids increased the thermal performance of all tested exchangers, with the TiO2-Al2O3/water hybrid nanofluid leading to higher improvements compared to the TiO2/water single type nanofluid. Increasing the number of plates in the heat exchanger resulted in more increment by using both types of nanofluids.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2022)

Article Engineering, Multidisciplinary

Economic cost and efficiency analysis of the employment of inserting rods with helical fins in a shell and tube heat exchanger under magnetic field and filled with nanofluid

Man-Wen Tian et al.

Summary: This numerical investigation examines the impact of inserting rods with helical fins in a shell and tube heat exchanger (ShT-HEX) under a magnetic field (MF) and filled with two-phase nanofluid (NF) on the thermal-hydraulic performance (THP). The study finds that the novel configuration with specific geometric factors and nanoparticles concentrations has superior THP and reduced manufacturing costs.

AIN SHAMS ENGINEERING JOURNAL (2022)

Proceedings Paper Materials Science, Multidisciplinary

Biosynthesized zinc nano fluid for helically coiled heat exchanger at constant heat flux

H. Ravi Kulkarni et al.

Summary: This study utilizes fresh leaves of spinach for the biosynthesis of zinc nanoparticles, which are then applied in a helical loop heat exchanger as a nanofluid. The heat transfer rate of the biosynthesized nanofluid is investigated, and the effects of Nusselt number, heat transfer coefficient, and friction factor are discussed.

MATERIALS TODAY-PROCEEDINGS (2022)

Article Thermodynamics

Thermal performance of a helical shell and tube heat exchanger without fin, with circular fins, and with V-shaped circular fins applying on the coil

Mehdi Miansari et al.

Summary: The study showed that increasing shell-side fluid velocity can improve heat transfer efficiency, and passing cold water on the shell side and hot water through the tube side also contributes to better heat transfer. Comparatively, circular fins demonstrated more significant effect on the performance of the heat exchanger than cut circular fins under different conditions.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Article Thermodynamics

Experimental and numerical analysis on using CuO-Al2O3/water hybrid nanofluid in a U-type tubular heat exchanger

Emine Yagiz Gurbuz et al.

Summary: This study aims to improve the thermal efficiency of U-type heat exchangers by using hybrid nanofluids. Numerical simulations demonstrated that adding fins and utilizing hybrid nanofluids can increase heat transfer rate in heat exchangers.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2021)

Article Engineering, Multidisciplinary

Exergetic performance of the helically coiled tube heat exchangers: Comparison the sector-by-sector with tube in tube types

Nidal H. Abu-Hamdeh et al.

Summary: Exergy analysis was conducted on different types of helically coiled heat exchangers, with new equations proposed for estimating exergy efficiency and performance coefficient based on Reynolds numbers and geometry. It was found that using sector-by-sector heat exchangers with semi-circle and quadrant-circle cross sections is more efficient compared to tube-in-tube heat exchangers.

ALEXANDRIA ENGINEERING JOURNAL (2021)

Article Thermodynamics

Performance assessment of a shell and helically coiled tube heat exchanger with variable orientations utilizing different nanofluids

Hussein M. Maghrabie et al.

Summary: The study examined the impact of the inclination angle on the performance of a shell and helically coiled tube heat exchanger (SHCT-HE), finding that increasing the angle enhances efficiency while reducing pressure drop. Experimental results showed significant improvements in coil Nusselt number and effectiveness at higher angles of inclination, offering potential insights for optimizing heat exchanger design.

APPLIED THERMAL ENGINEERING (2021)

Article Thermodynamics

Distilled Water-Based AlN plus ZnO Binary Hybrid Nanofluid Utilization in a Heat Pipe and Investigation of Its Effects on Performance

Erdem Ciftci

Summary: The preparation and utilization of hybrid nanofluids in thermal systems have gained popularity for their improved thermophysical properties. Compared to unary nanofluids, hybrid nanofluids enhance heat transfer performance by removing the disadvantages of individual components. Experimental results demonstrate that the hybrid utilization of nanoparticles significantly improves heat pipe characteristics, with a maximum decrease of 40.79% in thermal resistance.

INTERNATIONAL JOURNAL OF THERMOPHYSICS (2021)

Article Thermodynamics

Upgrading of the Performance of an Air-to-Air Heat Exchanger Using Graphene/Water Nanofluid

Adnan Soezen et al.

Summary: The study aimed to improve the thermal performance of air-to-air heat recovery units using graphene/water nanofluid as compared to pure water. Results showed that graphene/water nanofluid was more efficient, with maximum thermal efficiency values at 34.1% and 20.1% for graphene/water nanofluid and pure water, respectively. The use of graphene/water nanofluid decreased thermal resistance of heat pipes, leading to increased heat transfer.

INTERNATIONAL JOURNAL OF THERMOPHYSICS (2021)

Article Thermodynamics

Direct effect of nanoparticles on the thermal conductivity of CuO-water nanofluid in a phase transition phenomenon using molecular dynamics simulation

Mahdi Ghasemi et al.

Summary: The addition of CuO nanoparticles into water increases the thermal conductivity of nanofluid, with larger nanoparticle size leading to higher thermal conductivity and faster phase transition.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Article Thermodynamics

Analysis of thermal performance of an improved shell and helically coiled heat exchanger

Azim Dogus Tuncer et al.

Summary: A new modification involving the integration of a hollow tube for cold fluid inlet was proposed to enhance the performance of a shell and helically coiled heat exchanger. The modified heat exchanger design successfully regulated fluid flow, improving heat transfer efficiency. The experimental results showed an average difference of 8% between simulation and actual performance, with overall heat transfer coefficients ranging from 1600-3150 W/m(2)K for the shell side, and 5700-13,400 W/m(2)K for the coil side.

APPLIED THERMAL ENGINEERING (2021)

Article Materials Science, Multidisciplinary

Thermal Characterization of Coolant Maxwell Type Nanofluid Flowing in Parabolic Trough Solar Collector (PTSC) Used Inside Solar Powered Ship Application

Wasim Jamshed et al.

Summary: This study investigates the entropy production analysis and the impact of nano solid particles on a parabolic trough surface collector within a solar powered ship, using complex fluid dynamics models and nanofluids as working fluid. The findings suggest that the use of nanofluids can significantly increase the thermal efficiency of the collector.

COATINGS (2021)

Article Thermodynamics

Upgrading the performance of a new shell and helically coiled heat exchanger by using longitudinal fins

Azim Dogus Tuncer et al.

Summary: This study investigates the effect of adding fins on the thermal performance of a horizontal shell and helically coiled tube heat exchanger. Results show that integrating fins over the coil can increase turbulence intensity and improve heat transfer, with an average improvement of 10% in the heat transfer coefficient. The overall heat transfer coefficient can be enhanced by an average of 10.6% by adding fins, with the highest improvement reaching 15%.

APPLIED THERMAL ENGINEERING (2021)

Article Thermodynamics

Unsteady convective heat transfer in nanofluids at instantaneous transition to film boiling

A. A. Avramenko et al.

Summary: This paper analyzes the unsteady convective heat transfer during instantaneous film boiling of a nanofluid on a flat surface, using numerical computations based on self-similar equations to demonstrate qualitative agreement between simulated and experimental results.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Article Thermodynamics

Performance of a shell and helically coiled tube heat exchanger with variable inclination angle: Experimental study and sensitivity analysis

Hussein M. Maghrabie et al.

Summary: Experimental study and sensitivity analysis on the heat transfer and pressure drop of a shell and helically coiled tube heat exchanger (SHCTHE) were conducted, showing that the effectiveness of SHCTHE in the vertical direction is higher and the pressure drop is lower compared to the horizontal direction, leading to better performance evaluation criteria.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Article Energy & Fuels

Numerical study of a photovoltaic thermal (PV/T) system using mono and hybrid nanofluid

Irem Karaaslan et al.

Summary: Photovoltaic-thermal systems combine solar energy conversion to electricity and thermal energy. By using mono nanofluid, heat transfer efficiency can be improved compared to traditional fluids. The study shows that using a hybrid nanofluid can significantly increase electrical and thermal efficiency in PV/T systems while also reducing pressure drop.

SOLAR ENERGY (2021)

Article Thermodynamics

A numerical approach on hybrid nanofluid behavior in laminar duct flow with various cross sections

Gabriela Huminic et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Article Engineering, Chemical

Study of the thermal conductivity of hybrid nanofluids: Recent research and experimental study

Gabriela Huminic et al.

POWDER TECHNOLOGY (2020)

Article Thermodynamics

Intelligent optimization design of shell and helically coiled tube heat exchanger based on genetic algorithm

Cong Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Article Thermodynamics

Distinctive Features of the Use of Nanofluids To Enhance Boiling Heat Transfer

A. A. Avramenko et al.

JOURNAL OF ENGINEERING PHYSICS AND THERMOPHYSICS (2020)

Article Environmental Sciences

Numerical analysis of ball-type turbulators in tube heat exchangers with computational fluid dynamic simulations

F. Afshari et al.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2019)

Article Thermodynamics

Simulation and experimental analysis of heat transfer characteristics in the plate type heat exchangers using TiO2/water nanofluid

Ataollah Khanlari et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2019)

Article Engineering, Chemical

Experimental study on heat transfer enhancement of nanofluid flow through helical tubes

A. Mokhtari Ardekani et al.

ADVANCED POWDER TECHNOLOGY (2019)

Article Thermodynamics

Investigating the effect of nanoparticles diameter on turbulent flow and heat transfer properties of non-Newtonian carboxymethyl cellulose/CuO fluid in a microtube

Ali Rahimi Gheynani et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2019)

Proceedings Paper Materials Science, Multidisciplinary

Experimental investigation of heat transfer enhancement in shell and helically coiled tube heat exchanger using SiO2/water nanofluids

Amol F. Niwalkar et al.

MATERIALS TODAY-PROCEEDINGS (2019)

Article Engineering, Chemical

Prediction of heat transfer, pressure drop and entropy generation in shell and helically coiled finned tube heat exchangers

Mohammad Sepehr et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2018)

Article Thermodynamics

Heat transfer enhancement using non-Newtonian nanofluids in a shell and helical coil heat exchanger

B. Anil Kumar Naik et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2018)

Article Thermodynamics

Experimental study of thermal conductivity, heat transfer and friction factor of Al2O3 based nanofluid

Nishant Kumar et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2018)

Review Thermodynamics

Thermal conductivity of hybrid nanofluids: A critical review

Muhammad Usman Sajid et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Review Thermodynamics

Hybrid nanofluids for heat transfer applications - A state-of-the-art review

Gabriela Huminic et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Article Green & Sustainable Science & Technology

Flow and heat transfer analysis of TiO2/water nanofluid in a ribbed flat-plate solar collector

Farzad Bazdidi-Tehrani et al.

RENEWABLE ENERGY (2018)

Review Chemistry, Multidisciplinary

Preparation Techniques of TiO2 Nanofluids and Challenges: A Review

Hafiz Muhammad Ali et al.

APPLIED SCIENCES-BASEL (2018)

Article Thermodynamics

Thermophysical properties of water based Cu nanofluid used in special type of coil heat exchanger

Joanna Wilk et al.

APPLIED THERMAL ENGINEERING (2017)

Article Thermodynamics

Investigation of exergy efficiency in shell and helically coiled tube heat exchangers

Ashkan Alimoradi

CASE STUDIES IN THERMAL ENGINEERING (2017)

Article Thermodynamics

Study of thermal effectiveness and its relation with NTU in shell and helically coiled tube heat exchangers

Ashkan Alimoradi

CASE STUDIES IN THERMAL ENGINEERING (2017)

Article Thermodynamics

Heat transfer enhancement of shell-and-coiled tube heat exchanger utilizing helical wire turbulator

Davood Panahi et al.

APPLIED THERMAL ENGINEERING (2017)

Article Engineering, Chemical

Heat transfer and performance analysis of nanofluid flow in helically coiled tube heat exchangers

S. Bahrehmand et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2016)

Article Thermodynamics

Measurements of the contact angle of nanofluids and development of a new correlation

Jabez Chinnam et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2015)

Article Thermodynamics

Particle concentration levels of various nanofluids in plate heat exchanger for best performance

Arun Kumar Tiwari et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Article Thermodynamics

Local heat transfer coefficient in helical coils with single phase flow

B. K. Hardik et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Proceedings Paper Thermodynamics

Heat Transfer Enhancement using CuO/Water Nanofluid in a Shell and Helical Coil Heat Exchanger

T. Srinivas et al.

INTERNATIONAL CONFERENCE ON COMPUTATIONAL HEAT AND MASS TRANSFER (ICCHMT) - 2015 (2015)

Article Thermodynamics

Experimental analysis of heat transfer enhancement in shell and helical tube heat exchangers

N. Jamshidi et al.

APPLIED THERMAL ENGINEERING (2013)

Article Thermodynamics

Performance of an agitated helical coil heat exchanger using Al2O3/water nanofluid

T. Srinivas et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2013)

Review Green & Sustainable Science & Technology

Application of nanofluids in heat exchangers: A review

Gabriela Huminic et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)

Article Thermodynamics

Heat transfer characteristics in double tube helical heat exchangers using nanofluids

Gabriela Huminic et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)

Article Computer Science, Interdisciplinary Applications

CFD analysis of single-phase flows inside helically coiled tubes

J. S. Jayakumar et al.

COMPUTERS & CHEMICAL ENGINEERING (2010)

Article Engineering, Chemical

Pressure drop and friction factor in helical heat exchangers under nonisothermal and turbulent flow conditions

P Coronel et al.

JOURNAL OF FOOD PROCESS ENGINEERING (2003)