4.7 Article

Heat transfer enhancement of nanofluid flow at the entry region of microtubes

Related references

Note: Only part of the references are listed.
Article Thermodynamics

Thermal efficiency of eco-friendly MXene based nanofluid for performance enhancement of a pin-fin heat sink: Experimental and numerical analyses

Tehmina Ambreen et al.

Summary: This study evaluates the thermal efficiency of MXene-based nanofluid in a pin-fin heat sink through experimental and numerical analysis. The results show that using MXene coolant can significantly enhance heat transfer in the heat sink.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Article Thermodynamics

Irreversibility and hydrothermal analysis of the MWCNTs/GNPs-based nanofluids for electronics cooling applications of the pin-fin heat sinks: Multiphase Eulerian-Lagrangian modeling

Tehmina Ambreen et al.

Summary: This study investigates the entropy generation and hydrothermal characteristics of different pin-fin configurations using water-based MWCNT and MWCNT/GNP nanofluids in a heat sink. Results show that the triangular pin-fin heat sink performs the best, followed by the rhombus and hydrofoil pin-fin heat sinks.

CASE STUDIES IN THERMAL ENGINEERING (2022)

Article Thermodynamics

Measurement of the thermal conductivity of MWCNT-CuO/water hybrid nanofluid using artificial neural networks (ANNs)

Sara Rostami et al.

Summary: In this paper, artificial neural networks were developed to predict the thermal conductivity of multi-walled carbon nanotubes-CuO/water nanofluid, with the best ANN model and curve fitting method used to predict the behavior of the nanofluid. Results showed that the ANN outperformed in predicting k(nf) with better performance and correlation.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Review Thermodynamics

An updated review of nanofluids in various heat transfer devices

Eric C. Okonkwo et al.

Summary: Nanofluids have received increasing attention due to their enhanced thermophysical properties and wide range of thermal applications. Recent reviews have highlighted the progress made in 2019 regarding nanofluid preparation and their application in various heat transfer devices, while also discussing the challenges and future prospects of nanofluids as next-generation heat transfer fluids.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Article Thermodynamics

Numerical study on transient supercooling performance of annular thermoelectric cooler

Yan-Wei Gao et al.

Summary: Transient supercooling can effectively improve the performance of thermoelectric coolers, especially annular thermoelectric coolers with increased contact areas. Factors influencing the performance of annular thermoelectric coolers made of variable properties materials include pulse current parameters, thermoelectric element parameters, and convective heat transfer parameters. The results suggest that optimal pulse current parameters and thermoelectric element parameters play a key role in determining the supercooling effect of annular thermoelectric coolers.

APPLIED THERMAL ENGINEERING (2021)

Article Thermodynamics

Numerical analysis on the thermal performance of microchannel heat sinks with Al2O3 nanofluid and various fins

Abdullah Masoud Ali et al.

Summary: The study investigates the hydraulic and thermal performance of microchannel heat sink configurations for high performance electronic cooling applications using numerical modelling. Results show that inserting zig-zag fins and using 3% Al2O3 nanofluid coolant in the ducts significantly improve heat transfer efficiency and reduce contact temperature.

APPLIED THERMAL ENGINEERING (2021)

Article Energy & Fuels

Thermal performance and entropy generation of single-layer and double-layer constructal Y-shaped bionic microchannel heat sinks

Zhijian Duan et al.

Summary: This study introduces a Y-shaped bionic microchannel (YBMC) heat sink designed based on bionic concept and constructal law, which achieves better thermal performance and lower total pressure drop through the optimization of geometric parameters. The YBMC design provides a more uniform temperature distribution along the heated surface and exhibits a lower degree of irreversible loss compared to rectangular cases.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Article Thermodynamics

Experimental investigation of heat transfer of Al2O3 nanofluid in a microchannel heat sink

Sung Yong Jung et al.

Summary: This study systematically analyzed the velocity and temperature fields of Al2O3 nanofluid and DI water in MCHS using PIV and LIF measurement techniques, aiming to investigate their heat transfer characteristics. The experimental results showed that the thermal entropy generation rate was 6.3% smaller when nanofluid was used as the working fluid in MCHS compared to water. This will contribute to further research on the heat transfer characteristics of Al2O3 nanofluids.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Article Thermodynamics

Numerical investigation on heat transfer behavior of thermally developing flow inside rectangular microchannels

Hao Ma et al.

Summary: The study reveals that Reynolds number has a significant impact on the local Nusselt number in the thermally developing region while being independent of the developed Nusselt number. Additionally, the local Nusselt number increases with decreasing aspect ratio.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Article Thermodynamics

Flow and heat transfer behavior of hybrid nanofluid through microchannel with two different channels

R. Vinoth et al.

Summary: The study compared the heat transfer performance of pentagonal and triangular channel oblique finned microchannel heat sinks using different nanofluids, with results showing that the pentagonal channel heat sink performed better in heat transfer and increased pressure drop when using hybrid nanofluid.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Article Thermodynamics

Multi-objective optimization and multi-factors analysis of the thermal/hydraulic performance of the bionic Y-shaped fractal heat sink

Ziqiang He et al.

Summary: In this study, optimal structures of fractal heat sinks were obtained using the constructal theory and genetic algorithm, and Taguchi experimental design was employed for CFD simulation to investigate the impact factors on performance. The results showed that heat flux had the highest contributions to maximum temperature and comprehensive performance, while the fractal number had the highest contribution to pressure drop.

APPLIED THERMAL ENGINEERING (2021)

Article Thermodynamics

Laminar Thermally Developing Flow in Elliptical Minichannels with Isoflux Wall

Liangbin Su et al.

Summary: The study investigated convective heat transfer in elliptical minichannels under different boundary conditions. Results showed that the Peclet number and aspect ratio influence heat transfer characteristics, providing insights for the design and optimization of elliptical minichannel heat sinks.

JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2021)

Article Thermodynamics

NUMERICAL INVESTIGATION OF MOLTEN SALT-BASED NANOFLUID LAMINAR HEAT TRANSFER IN A CIRCULAR TUBE USING EULERIAN-LAGRANGIAN METHOD

Boshu He et al.

Summary: The study found that the heat transfer performance of nanofluid was significantly better than that of pure molten salt, with the local heat transfer coefficient and Nusselt number of nanofluid about 30% higher than those of pure molten salt, and increasing with higher Reynolds number and nanoparticles concentration. Particularly, nanofluid with small nanoparticles size (10 to 100 nm) showed significant improvement in heat transfer performance.

THERMAL SCIENCE (2021)

Article Thermodynamics

Two-phase investigation of water-Al2O3 nanofluid in a micro concentric annulus under non-uniform heat flux boundary conditions

Davood Toghraie et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2020)

Article Thermodynamics

Heat transfer enhancement through periodic flow area variations in microchannels

Kai Xian Cheng et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Article Thermodynamics

Effect of twisted-tape inserts and nanofluid on flow field and heat transfer characteristics in a tube

Wei He et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Article Thermodynamics

Heat transfer correlation for circular and non-circular ducts in the transition regime

A. P. C. Sarmiento et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Article Engineering, Mechanical

Heat transfer and flow optimization of a novel sinusoidal minitube filled with non-Newtonian SiC/EG-water nanofluids

Liu Yang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Article Physics, Multidisciplinary

Heat transfer enhancement in sodium alginate based magnetic and non-magnetic nanoparticles mixture hybrid nanofluid

Abid Hussanan et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2020)

Article Thermodynamics

Turbulent heat transfer and nanofluid flow in an annular cylinder with sudden reduction

Tuqa Abdulrazzaq et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Article Thermodynamics

Thermal performance of double serpentine minichannel heat sinks: Effects of inlet-outlet arrangements and through-holes

Xin Cao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Review Nanoscience & Nanotechnology

Miniaturization of fluorescence sensing in optofluidic devices

Daniel Mariuta et al.

MICROFLUIDICS AND NANOFLUIDICS (2020)

Article Thermodynamics

Heat transfer characteristics of thermally developing flow in rectangular microchannels with constant wall temperature

Liangbin Su et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)

Article Physics, Multidisciplinary

Rough curved microchannel slip flow

Nnamdi Fidelis Okechi et al.

EUROPEAN PHYSICAL JOURNAL PLUS (2020)

Review Green & Sustainable Science & Technology

An updated review on application of nanofluids in flat tubes radiators for improving cooling performance

Neeti Arora et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Article Thermodynamics

Convective heat transfer of molten salt-based nanofluid in a receiver tube with non-uniform heat flux

Zhaoping Ying et al.

APPLIED THERMAL ENGINEERING (2020)

Article Thermodynamics

Rarefied Gas Flows in Long Circular and Square Microchannels

M. M. Yovanovich et al.

JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2020)

Article Thermodynamics

Study on convective heat transfer and pressure drop of MWCNTs/water nanofluid in mini-tube

Ahmed A. Hussien et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Article Engineering, Chemical

A practical method for predicting the friction factor of power-law fluids in a rectangular duct

Mehmet Ayas et al.

CHEMICAL ENGINEERING COMMUNICATIONS (2019)

Article Thermodynamics

The influence of hybrid nanofluids on the performances of elliptical tube: Recent research and numerical study

Gabriela Huminic et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Article Engineering, Chemical

An analytical model for gas transport through elliptical nanopores

Zheng Sun et al.

CHEMICAL ENGINEERING SCIENCE (2019)

Article Thermodynamics

Empirical correlation of laminar forced convective flow in trapezoidal microchannel based on experimental and 3D numerical study

Gagan Kewalramani et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)

Article Mechanics

Free and circular jets cooled by single phase nanofluids

Mustafa Turkyilmazoglu

EUROPEAN JOURNAL OF MECHANICS B-FLUIDS (2019)

Article Thermodynamics

Numerical investigation of laminar forced convection for a non-Newtonian nanofluids flowing inside an elliptical duct under convective boundary condition

Haroun Ragueb et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2019)

Article Thermodynamics

Laminar flow and heat transfer in the entrance region of elliptical minichannels

Liangbin Su et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Article Thermodynamics

Comparison of CFD simulations to experiment for heat transfer characteristics with aqueous Al2O3 nanofluid in heat exchanger tube

Sedong Kim et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2018)

Article Thermodynamics

Effect of fin shape on the thermal performance of nanofluid-cooled micro pin-fin heat sinks

Tehmina Ambreen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Article Computer Science, Interdisciplinary Applications

Numerical simulation of pressure drop for three-dimensional rectangular microchannels

Zhipeng Duan et al.

ENGINEERING COMPUTATIONS (2018)

Article Mechanics

Shear work contribution to convective heat transfer of dilute gases in slip flow regime

Pamela Vocale et al.

EUROPEAN JOURNAL OF MECHANICS B-FLUIDS (2017)

Article Thermodynamics

The characteristics of convective heat transfer in microchannel heat sinks using Al2O3 and TiO2 nanofluids

G. D. Xia et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2016)

Article Thermodynamics

Heat transfer and friction factor of water based TiO2 and SiO2 nanofluids under turbulent flow in a tube

W. H. Azmi et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2014)

Article Thermodynamics

The effect of cross sectional area of tube on friction factor and heat transfer nanofluid turbulent flow

Adnan M. Hussein et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2013)

Article Thermodynamics

Gas Microflows in the Slip Flow Regime: A Critical Review on Convective Heat Transfer

Stephane Colin

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2012)

Article Thermodynamics

Development of new correlations for convective heat transfer and friction factor in turbulent regime for nanofluids

Ravikanth S. Vajjha et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

Article Engineering, Mechanical

Slip Flow in the Hydrodynamic Entrance Region of Circular and Noncircular Microchannels

Zhipeng Duan et al.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2010)

Article Thermodynamics

Experimental investigation of nanofluids in confined laminar radial flows

Iulian Gherasim et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2009)

Article Thermodynamics

Slip flow in elliptic microchannels

Zhipeng Duan et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2007)

Article Thermodynamics

Laminar flow and heat transfer in the entrance region of trapezoidal channels with constant wall temperature

M Renksizbulut et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2006)